RoadVitals

2016 Ferrara Intruder

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Latest Aug 4, 2016
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2016 Ferrara Intruder. 3 safety recalls have been issued covering this model year.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

3 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
16V581000

POWER TRAIN:MANUAL TRANSMISSION

Aug 4, 2016
57 units potentially affected
The defect: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Intruder and Cinder fire trucks built on Freightliner and International chassis manufactured April 13, 2015, to May 30, 2016. The affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. This transmission sends power to the wheels of an emergency response vehicle or powers an add-on unit such as a water pump used for fighting fires. A component within the shift unit may be damaged and as a result, the operator may not be able to switch the power output.
The risk: If the power output cannot be changed, once the fire truck arrives at the scene, it may not be able to pump water to aid in extinguishing the fire, increasing the risk of injury.
The remedy: Ferrara will notify owners, and the shift unit assembly will be removed and the clevis pin and retaining rings will be replaced, free of charge. The recall began on September 9, 2016. Owners may contact Ferrara customer service at 1-225-567-7100 extension 3011.
Ferrara Fire Apparatus, Inc.View on NHTSA.gov
16V544000

ELECTRICAL SYSTEM

Jul 20, 2016
24 units potentially affected
The defect: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance.
The risk: The unintended turning on or off of accessories such as emergency beacons or automatic snow chains can increase the risk of a crash.
The remedy: Ferrara will notify owners, and service personnel or service centers will reprogram the units, free of charge. The recall began on August 26, 2016. Owners may contact Ferrara customer service at 1-225-567-7100 extension 3011.
Ferrara Fire Apparatus, Inc.View on NHTSA.gov
16V445000

EQUIPMENT

Jun 16, 2016
60 units potentially affected
The defect: Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Cinder, Ultra, and Intruder vehicles built on Freightliner and International chassis manufactured August 3, 2015, to April 29, 2016, equipped with pumps to provide pressurized water to aid in fighting fires. These pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump.
The risk: If the strainer and/or debris enters the pump, and the operator is forced to shut down the pump, reducing firefighting effectiveness, there could be an increased risk of injury.
The remedy: Ferrara will notify owners, and owners will check the strainer for missing solder at the joints. Any strainers missing solder will be replaced, free of charge. The recall began on July 20, 2016. Owners may contact Ferrara customer service at 1-800-443-9006 or hale customer service at 1-800-533-3569.
Ferrara Fire Apparatus, Inc.View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Compare model years

Complaint and recall counts across every year of this model

Ferrara Intruder by model year
YearComplaintsRecallsInvestigationsIssue Index
2019010—
2018010—
2017010—
2016Viewing030—
2015030—
2014010—
2013010—
2012010—
2011010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.