RoadVitals

1986 Ford E-250 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Aug 9, 1988
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
4 investigations on file

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

88V133000

ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS

Aug 9, 1988
14,975 units potentially affected
The defect: EXTREME OPERATING CONDITIONS COULD CAUSE PREMATURE DETERIORATION OF THE ENGINE COMPARTMENT HEATER HOSES OR ENGINE BYPASS HOSES.
The risk: ENGINE COOLANT COULD DISCHARGE ONTO THE ENGINE AND ITSEXHAUST MANIFOLD CREATING THE POTENTIAL FOR A FIRE DUE TO THE HIGH ENGINEEXHAUST MANIFOLD TEMPERATURES.
The remedy: REPLACE HOSES AND RADIATOR CAPS; INSTALL HIGH HEAT RESISTANCE ALUMINIZED STAINLESS STEEL MUFFLERS.
FORD MOTOR COMPANYView on NHTSA.gov
87V144000

ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL

Sep 9, 1987
188,000 units potentially affected
The defect: VEHICLES ARE SUBJECT TO EXCESSIVE UNDERHOOD TEMPERATURES AND FUEL SYSTEM PRESSURES IN SEVERE DUTY APPLICATIONS.
The risk: THIS CREATES POTENTIAL FOR FUEL EXPULSION FROM THE FUELFILLER PIPE WHICH IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN AFIRE.
The remedy: INSTALL MODIFICATION KITS TO MINIMIZE POSSIBILITY OF FUEL EXPULSION AND TO SHIELD UNDERBODY COMPONENTS FROM EXHAUST SYSTEM HEAT.
FORD MOTOR COMPANYView on NHTSA.gov
86V173000

STEERING:LINKAGES:DRAG:LINK:CONNECTION

Dec 30, 1986
28,791 units potentially affected
The defect: RUBBER THAT ENCASES BALL STUD AND SOCKET JOINT (CONNECTS STEERING DRAG LINK AND PITMAN ARM) MAY DETERIORATE AND CAUSE METAL TO METAL CONTACT. CONSEQUENCE OF DEFECT: COMPLETE SEPARATION OF THE DRAG LINK TO PITMAN ARM CONNECTION COULD OCCUR RESULTING IN LOSS OF STEERING CONTROL.
The remedy: INSTALL NEW DRAG LINK ASSEMBLIES WITH STEEL BALL AND SOCKET JOINTS AT THE PITMAN ARM CONNECTIONS.
FORD MOTOR COMPANYView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE94065ClosedPreliminary Evaluation

FUEL INJECTOR PUMP FAILS

Opened Aug 19, 1994
Closed Dec 28, 1994

There is no summary currently available

VEHICLE SPEED CONTROL:LINKAGES
EA87019ClosedEngineering Analysis

FUEL EXPULSION

Opened Apr 30, 1987
Closed Oct 23, 1987

SYNOPSIS: UNDER CERTAIN OPERATING CONDITIONS, FUEL IS EXPELLED FROM THEFUEL FILLER PIPE, WHEN THE FILLER CAP IS REMOVED. IT HAS BEEN REPORTEDTHAT VEHICLE FIRES AND PERSONAL INJURIES HAVE RESULTED. THE PROBLEMAPPEARS TO BE ONE OF EXCESSIVE HEAT COLLECTING UNDER THE VEHICLES, USUALLYWHILE STATIONARY WITH THE ENGINES IDLING OR BEING OPERATED UNDER EXTREMESERVICE CONDITIONS. THIS HEAT CAUSES THE FUEL TO VAPORIZE IN THE FUELTANK AND DEVELOP PRESSURES IN EXCESS OF WHAT THE FUEL TANK VENT SYSTEMCAN HANDLE.STATUS: BY LETTER DATED 9/9/87, FORD NOTIFIED NHTSA OF RECALL OF 188,000E-250 & E-350 VEHICLES TO INSTALL PARTIAL VERSION OF M-53A AMBULANCE RECALLKIT(87V-144)===

VEHICLE SPEED CONTROL:LINKAGES
PE87017ClosedPreliminary Evaluation

FUEL LEAKS/FIRES

Opened Jan 28, 1987
Closed May 26, 1987

SUMMARY OF INFORMATION FROM MANUFACTURER:INSTANCES WERE FOUND WHERESPRING LOCK COUPLINGS FAILED CAUSING GASOLINE TO BE RELEASED THROUGHOUTTHE ENGINE COMPARTMENT CAUSING FIRES.LEAKS FROM FUEL LINES MAY ALSO BE ACONTRIBUTING CAUSE TO THE ENGINE COMPARTMENT FIRES.---------------------------------------------------------------------------ANALYSIS:DATA INDICATES THAT THE ALLEGED PROBLEM MAY BE CAUSED BY THESPRING LOCK QUICK CONNECT COUPLINGS WHICH CONNECT THE FUEL SUPPLY ANDRETURN LINES TO THE ENGINE AS WELL AS FUEL LEAKAGE FROM THE FUEL LINES.---------------------------------------------------------------------------PROPOSED ACTION: UPGRADE THIS PE TO AN EA.(EA87-020)===

VEHICLE SPEED CONTROL:LINKAGES
EA87002ClosedEngineering Analysis

FILLER NECK SPURT

Opened Nov 4, 1986
Closed Apr 29, 1987

SUMMARY OF INFORMATION FROM MANUFACTURER:FORD HAS SUPPLIED INFORMATION REQUESTED CONCERNING VEHICLE POPULATIONAND THE NUMBER OF COMPLAINTS.ANALYSIS:THE PROBLEM APPEARS TO BE ONE OF EXCESSIVE HEAT COLLECTING UNDER THEVEHICLES, USUALLY WHILE STATIONARY WITH THE ENGINE IDLING.THIS HEATCAUSES THE FUEL TO VAPORIZE IN THE FUEL TANK AND DEVELOP PRESSURES INEXCESS OF WHAT THE VENT SYSTEM CAN HANDLE.STATUS:IR TO FORD SENT ON 2/20/87. MEETING WITH FORD AND FINAL STAGE MANUFACTUR-ERS HELD ON MARCH 11 & 12, 1987. ADDITIONAL MEETING HELD ON MARCH 7, 1987.ALSO ON APRIL I, 1987.FORD ANNOUNCED SERVICE CAMPAIGN, NO SAFETY RECALL.RECALL REQUEST LETTER SENT ON 4/7/87. FORD DID NOT AGREE TO A SAFETYRECALL, CONSEQUENTLY A PANEL MEETING WAS HELD ON 4/29/87 AND INVESTIGATIVECASE C87-003 WAS OPENED.THIS EA WAS CLOSED AS A RESULT OF THE CASE OPEN-ING ON 4/27/87.===

VEHICLE SPEED CONTROL:LINKAGES

Elsewhere on this vehicle

Data sources