BACK OVER PREVENTION:SOFTWARE
2021 Ford Escape Recalls
Safety recall campaigns filed with NHTSA that cover this model year
Data refreshed
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecall campaigns
19 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is
VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR
STRUCTURE:BODY:HATCHBACK/LIFTGATE:HINGE AND ATTACHMENTS
EQUIPMENT:ELECTRICAL:ENGINE BLOCK HEATER
FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
BACK OVER PREVENTION:SOFTWARE
ENGINE
FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM)
EQUIPMENT:OTHER:LABELS
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
ENGINE
FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
ENGINE AND ENGINE COOLING; STRUCTURE:BODY:BUMPERS:ACTIVE SHUTTERS/GRILL; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS
ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION
ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY; HYBRID PROPULSION SYSTEM
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY; HYBRID PROPULSION SYSTEM
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP:CONTROL/DRIVE MODULE
What a recall is
- Safety recall
- A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
- Safety investigation
- NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
- Manufacturer communication
- Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.
Healey Brothers Ford / Open Recall Sale
NHTSA is opening this audit query to investigate whether Healey Brothers Ford, LLC of Beacon, New York, has complied with the requirements of the National Traffic and Motor Vehicle Safety Act. The Safety Act requires, among other things, that a manufacturer notify its dealers of defects related to motor vehicle safety and noncompliance with Federal Motor Vehicle Safety Standards and in turn that a dealer not deliver a new vehicle subject to a recall unless the recall remedy has been performed. 49 U.S.C. § 30120(i).NHTSA is in receipt of information that indicates this dealer delivered at least one new vehicle to a first purchaser without having performed required recall repairs. Accordingly, we are opening this audit query to seek additional information concerning this issue.
Failed Door Check Arm Attachment Point
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Elsewhere on this vehicle
Data sources
- NHTSA Office of Defects Investigation — recall campaigns and safety investigations
Data on this page last refreshed .