VEHICLE SPEED CONTROL
1996 Ford Explorer Recalls
Safety recall campaigns filed with NHTSA that cover this model year
Data refreshed
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecall campaigns
11 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is
EXTERIOR LIGHTING:HEADLIGHTS
EXTERIOR LIGHTING
EXTERIOR LIGHTING
TIRES:TREAD/BELT
SUSPENSION
TIRES:TREAD/BELT
STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE/STRUT
VEHICLE SPEED CONTROL
EQUIPMENT:OTHER:LABELS
LATCHES/LOCKS/LINKAGES:DOORS:LATCH
What a recall is
- Safety recall
- A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
- Safety investigation
- NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
- Manufacturer communication
- Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.
FRONT SUSPENSION STABILIZER BAR LINK
There is no summary currently available
ACCELERATOR PEDAL
There is no summary currently available
ELECTRICAL FIRE IN CENTER CONSOLE
THIS INVESTIGATION REVEALED THAT CONSOLE FIRES IN THE SUBJECT VEHICLES MOST OFTEN OCCURRED WHILE VEHICLES EQUIPPED WITH THE LAMP OUTAGE MODULE (LOM), WHICH IS PART OF THE MESSAGE CENTER, WERE TOWING A TRAILER AND WHICH HAD BEEN MODIFIED BY ADDING AN AFTERMARKET TRAILER WIRING HARNESS INTO THE VEHICLE'S TAILLIGHT CIRCUITS.THE OWNER'S MANUAL STATES NEVER AND MORE THAN OTHER TRAILER LIGHT BULB TO ONE CIRCUIT HOWEVER TRAILERS FREQUENTLY CONTAIN SEVERAL BULBS.THE RESULTING EXCESS CURRENT PASSING THROUGH THE LOM COULD CAUSE IT TO OVERHEAT RESULTING IN A FIRE.PROPER AFTERMARKET INSTALLATION OF TRAILER WIRING REQUIRES THE USE OF A BYPASS MODULE, WHICH OBTAINS POWER FOR THE TRAILER LIGHTS DIRECTLY FROM THE BATTERY RATHER THAN FROM THE VEHICLE'S TAIL LIGHT AND STOP LAMP CIRCUITS, OR THE USE OF THE MANUFACTURER'S WIRING HARNESS.IN A LETTER DATED SEPTEMBER 2, 1997, FORD NOTIFIED ODI THAT IT INTENDS TO TAKE ACTION TO PRECLUDE FURTHER INCIDENTS INCLUDING ISSUING A TECHNICAL SERVICE BULLETIN TO ITS DEALERS, NOTIFYING TRAILER RENTAL ASSOCIATIONS AND AGENCIES WHERE KNOWN, AND ADVISING OWNERS BY LETTER OF THE PROPER METHOD FOR CONNECTION OF TRAILER TOW WIRING ON THE SUBJECT VEHICLES.THERE WAS NO DEFECT TREND IN THE SUBJECT VEHICLES IDENTIFIED AS A RESULT OF THIS INVESTIGATION, AND FURTHER EXPENDITURE OF AGENCY RESOURCES IS NOT WARRANTED TO CONTINUE THE INVESTIGATION.
Elsewhere on this vehicle
Data sources
- NHTSA Office of Defects Investigation — recall campaigns and safety investigations
Data on this page last refreshed .