2024 Ford F-250 Sd Problems

The dealer had attempted to repair the recall 26C10 on my truck that tows daily. The team has attempted to fix this problem with 3 service visits and performed multiple software flashes for Recall 26C10 which have failed to fix the safety defect. The trailer module hardware is bricked. Now I’m being told the module is on national back order and they are unsure what to do next.ñ, if this is even the fix. This is a serious safety issue that makes my truck useless for towing which is a major part of our regular use.

The truck will shut off a short period of time after starting and often won't restart. It displays a message stating "Vehicle may not start/restart. Service now". Sometimes this message will pop up even without the vehicle shutting off. This has occurred in park, drive, and reverse. My wife was backing out of a parking spot when the vehicle shut off, leaving her in the middle of the parking lot unable to restart the vehicle. It was already at a dealer once for repairs and they claimed to have performed the work called out on a service bulletin. The issues have persisted even after these repairs. The vehicle is now back to the dealer to see if they can figure out what is going on.

While driving, multiple warning lights illuminate simultaneously — ABS, brake, and all driver assist/safety systems — and the drive mode drops to Standard Locked. During these events the anti-lock braking, stability control, traction control, and trailer sway control systems appear to go offline. I have photographs of the illuminated warnings. My own OBD-II scan on 7/9/26 recorded U0121 (lost communication with ABS module), U0415 (invalid data from ABS module), U3035 (communication authentication failure), and U1012. The dealer's own scan confirmed multiple stored "lost communication with ABS module" codes in module history. The vehicle has a documented history of water intrusion from the sunroof drains, which the dealer was unable to reproduce or repair; water tracked to the windshield/mirror electronics and into the dash. On 7/13/26 the dealer reprogrammed the ABS module with a software update but performed no physical inspection of the wiring, connectors, or modules for water damage or corrosion. The condition is intermittent and unresolved.

2024 F250 Super Crew Cab, Single Rear Wheel, King Ranch. While driving on clearly marked highway, Lane Centering immediately begins to "Ping=Pong" or oscillate between clearly marked highway center and shoulder lanes markings. It is not a slow oscillation and if allowed to go unchecked for more than 2-3 complete side to side oscillations will go out of the lines and onto the shoulder. I haven't actually timed the oscillations but I estimate about 4-9 seconds from engaging the system to completion of one oscillation cycle (from center of lane to the left or right line, then over to the other, and back to center). I understand that this is not a "self-driving" feature, but the best thing about this feature is the ability to turn it off. It is a safety hazard, especially if it is engaged near a roadway edge and immediately overcorrects. I looked on multiple internet forums to see if this was an isolated incident and was disappointed to see that it seems to be a fairly common issue. I was surprised to not find anything on the NHTSA website.

While driving, multiple warning lights illuminate simultaneously — ABS, brake, and all driver assist/safety systems — and the drive mode drops to Standard Locked. During these events the anti-lock braking, stability control, traction control, and trailer sway control systems appear to go offline. I have photographs of the illuminated warnings. My own OBD-II scan on 7/9/26 recorded U0121 (lost communication with ABS module), U0415 (invalid data from ABS module), U3035 (communication authentication failure), and U1012. The dealer's own scan confirmed multiple stored "lost communication with ABS module" codes in module history. The vehicle has a documented history of water intrusion from the sunroof drains, which the dealer was unable to reproduce or repair; water tracked to the windshield/mirror electronics and into the dash. On 7/13/26 the dealer reprogrammed the ABS module with a software update but performed no physical inspection of the wiring, connectors, or modules for water damage or corrosion. The condition is intermittent and unresolved.

The dealer had attempted to repair the recall 26C10 on my truck that tows daily. The team has attempted to fix this problem with 3 service visits and performed multiple software flashes for Recall 26C10 which have failed to fix the safety defect. The trailer module hardware is bricked. Now I’m being told the module is on national back order and they are unsure what to do next.ñ, if this is even the fix. This is a serious safety issue that makes my truck useless for towing which is a major part of our regular use.

Slight vibration at highway speed accompanied by faint grinding noise. Ford installed front auto locker to only one front wheel and a dummy full time locker to right front wheel in non trimmer 2024 f250 and f350s. They know the problem because they issued a tsb 52423 but do not contact truck owners of issue. Having only one locker makes the right side front axel spin at highway speeds and cause noise, vibration and unequal drag on the two front wheels causing the vehicle to drift to the right. Ford knows this, as evident by them going back to two locking auto hubs on 2025 models. My bigger concern is what happens in 100k k miles when the front differential being warn out by the highway speeds fails and locks up the front differential and suddenly locks the front right wheel and potentially sends the 7000 lb vehicle in an uncontrollable right turn. I am currently working with walker Ford to correct this issue with my truck. In my opion, this is a huge safety issue because Ford is aware of this problem but is not notifying owners of the issue with an official recall. Needed fix, replace right dummy locker hub with functional hub like the left side ( part number HC3Z3B396A $260), instal replacement volume line (part number HC3Z3C124B $51) if said truck does not already have one, and finally install 6 in vacume line (part number HC323C125C $6) to the front right hub. In my opion, Ford should be held fully liable for the human safety implications down the road if they continue to ignore this proplem.

I purchased my new 2024 Ford F250 on [XXX] with less than 30 miles on the odometer. It includes a 10-speed automatic transmission. I have noticed erratic up shifting and down shifting of the transmission. The problem started at approximately 700 miles on the vehicle. Additionally I have noticed that after initial starting the vehicle, when placed into drive or reverse, the transmission appears to slam into gear as noticed by a large jerk and loud sound. The vehicle continues to sound like there is a mismatch between the engine revving up and transmission lagging behind for some time, or as if the transmission is slipping gears. The new vehicle was taken into the dealership on 6/9/2025 at 7:00AM and work was reportedly completed and vehicle ready for pickup on [XXX]. I was informed that the service technician performed a break-in procedure and that everything was okay. Within 30 minutes of picking up the vehicle the same problem started reoccurring. I called my service advisor (Michael Garcia) the follow day, [XXX] to report the same issue. I spoke with the service agent and was not able to get a loaner vehicle until 6/28/2025. At this point the vehicle has less that 3,000 miles on it. I dropped off the vehicle at 7:00 AM on the 24th for repair. Today is the 7th of July, 2025, and I am still waiting for the dealership to give me the status. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2024 Ford F-250 SD. The contact stated that while driving approximately 40 MPH on the highway, the steering wheel failed to turn as intended. Due to the failure, the vehicle struck a curb. There were no injuries or property damage. The vehicle was turned off, and it was shifted into park(P). The brakes were inoperable during the failure. The vehicle was towed to a dealer to be inspected, and it was determined that a bolt was missing from the steering wheel assembly. The missing bolt was replaced. The manufacturer was not notified of the failure. The approximate failure mileage was 6,000. The VIN was not available.

The contact owns a 2024 Ford F-250. The contact stated that while driving at an undisclosed speed, the steering wheel inadvertently turned the vehicle to the right. Additionally, there was play in the steering wheel. Due to the failure, the contact was pulled over by police for DUI. The vehicle was taken to the dealer, who performed an alignment, but the failure persisted, and the vehicle began pulling to the left while driving. The contact was made aware by the Ford App that there were two repair work orders for electrical and steering failures prior to purchasing the vehicle. The vehicle was taken to a second dealer, Lorenzo Ford (30725 South Federal Highway, Homestead, FL 33030), for a second alignment and transmission reprogramming after a battery replacement, but the failure persisted. The vehicle was taken to an independent mechanic, who performed a third alignment, but the failure recurred. The vehicle was then taken back to Lorenzo Ford (30725 South Federal Highway, Homestead, FL 33030); however, no diagnostic trouble codes were retrieved, and dealer was unable to duplicate the failure. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 28.

At 5k miles there was an intermittent ticking/grinding noise. Dealer could not reproduce. At 10k it became more frequent. Dealer confirmed noise and found metal shavings in filter. Engine replaced per TSB. New engine failed after 100 miles. Blinking check engine light came on. Dealer inspected. Required Ford Engineer to review. More metal found in new engine. Engine replaced again.

I purchased my new 2024 Ford F250 on [XXX] with less than 30 miles on the odometer. It includes a 10-speed automatic transmission. I have noticed erratic up shifting and down shifting of the transmission. The problem started at approximately 700 miles on the vehicle. Additionally I have noticed that after initial starting the vehicle, when placed into drive or reverse, the transmission appears to slam into gear as noticed by a large jerk and loud sound. The vehicle continues to sound like there is a mismatch between the engine revving up and transmission lagging behind for some time, or as if the transmission is slipping gears. The new vehicle was taken into the dealership on 6/9/2025 at 7:00AM and work was reportedly completed and vehicle ready for pickup on [XXX]. I was informed that the service technician performed a break-in procedure and that everything was okay. Within 30 minutes of picking up the vehicle the same problem started reoccurring. I called my service advisor (Michael Garcia) the follow day, [XXX] to report the same issue. I spoke with the service agent and was not able to get a loaner vehicle until 6/28/2025. At this point the vehicle has less that 3,000 miles on it. I dropped off the vehicle at 7:00 AM on the 24th for repair. Today is the 7th of July, 2025, and I am still waiting for the dealership to give me the status. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

LT275/65R20 126/123R M+S Bridgestone Dueler A/T Without warning the tread explosively separated at normal highway speed of 70 MPH while driving straight in the morning with an approximate outdoor temperature 75 degrees or less. The truck immediately and uncontrollably swerved into the left passing lane nearly causing vehicle to turn completely sideways. Gained control of vehicle and pulled to side of the road. The tire tread had separated but the tire still retained air pressure making it possible to slow safely into road curb lane. Extensive truck damage occurred to fender, wheel well internal to engine compartment and the front bumper. Amazing that it ruined the front bumper. The tires were recently rotated and inspected by Discount Tire. There were no warnings, symptoms, messages or indications of any kind that the tire was defective. These tires will be replaced today. Fortunately I was not killed in this extreme failure.

The contact owns a 2024 Ford F-250 SD. The contact stated that while the dealer was performing a routine service on the vehicle, the dealer informed the contact that the vehicle was designed with 2 different 4-Wheel Drive hubs, a driver's side automatic hub and a passenger's side dummy hub. The contact was concerned that the design could reduce fuel efficiency. The vehicle was not repaired. The manufacturer was made aware of the failure, but no assistance was provided. The failure mileage was approximately 18,000. The VIN was not available.

The contact owns a 2024 Ford F-250 SD. The contact stated that while the dealer was performing a routine service on the vehicle, the dealer informed the contact that the vehicle was designed with 2 different 4-Wheel Drive hubs, a driver's side automatic hub and a passenger's side dummy hub. The contact was concerned that the design could reduce fuel efficiency. The vehicle was not repaired. The manufacturer was made aware of the failure, but no assistance was provided. The failure mileage was approximately 18,000. The VIN was not available.

On numerous times when you start the truck there is a delay from when you engage drive and the drivetrain gets power. To the point that 1 time the truck rolled back into another destroying their bumper.

Headlights on new Platinum 2024 F250--when driving at night there are several issues. On low beam there is a black line that shows up across the upper view. On high beam the black line is even more prominent and shapes start showing up in the lights. Squares first then as you drive and turn they change to V, M and X shapes. (see pictures). The truck has 560 miles on it and it has been to the Ford dealership twice. They are saying that there is nothing wrong with the lights, and these lights are the new projector lights from Ford. They even pulled another Platinum 2024 F250 next to mine to compare the lights and they are the same (see pictures) I am not getting anywhere with Ford, our local dealership is trying, but Ford is not helping them. I even made a call to customer service on 8/22/24. They told me that I need to go to another dealership and get a second opinion. These lights are very distracting with shapes moving across your line of vision and could be distracting to other vehicles. Also, there are totally blacked out areas on the sides, we live in a high deer population area, being able to see in the ditches is imperative. I do not want to drive at night due to it being unsafe. Truck is available for inspection upon request. Its just parked for now until we can get the lights changed or Ford does a recall. This is my second complaint filed online. I never got a call back from the first complaint.

Headlights on new Platinum 2024 F250--when driving at night there are several issues. On low beam there is a black line that shows up across the upper view. On high beam the black line is even more prominent and shapes start showing up in the lights. Squares first then as you drive and turn they change to V, M and X shapes. (see pictures). The truck has 560 miles on it and it has been to the Ford dealership twice. They are saying that there is nothing wrong with the lights, and these lights are the new projector lights from Ford. They even pulled another Platinum 2024 F250 next to mine to compare the lights and they are the same (see pictures) I am not getting anywhere with Ford, our local dealership is trying, but Ford is not helping them. I even made a call to customer service on 8/22/24. They told me that I need to go to another dealership and get a second opinion. These lights are very distracting with shapes moving across your line of vision and could be distracting to other vehicles. Also, there are totally blacked out areas on the sides, we live in a high deer population area, being able to see in the ditches is imperative. I do not want to drive at night due to it being unsafe. Truck is available for inspection upon request. Its just parked for now until we can get the lights changed or Ford does a recall.

Vehicle: 2024 Ford F-250 Component: STRUCTURE – SUNROOF/MOONROOF Summary: While driving at highway speed (~75 mph) on I-75, the twin-panel moonroof suddenly exploded outward with a loud bang. All glass was expelled upward/outward; no glass fell into the cabin or onto the sunshade. No vehicles nearby, no overpasses, no impact evidence on paint/roof, no strike point visible on remaining glass edges. Vehicle has a documented history of three prior dealership repairs/adjustments for leaks and alignment issues with the sunroof assembly at Sam Galloway Ford. Ford has denied warranty coverage twice, citing "radiating cracks" and claiming tempered glass cannot explode outward without external influence, despite zero physical evidence of impact and despite the prior misalignment repairs being a known cause of stress fractures in tempered glass. This is a serious safety defect — the explosive failure at highway speed created a sudden open roof and loud detonation that could have caused loss of vehicle control.

The contact owns a 2024 Ford F250 SD. The contact received notification of NHTSA Campaign Number: 24V806000 (BACK OVER PREVENTION, STRUCTURE); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2024 Ford F-250 SD. The contact stated that while driving at various speeds for approximately six hours with the heated seats activated, there was an abnormal burning odor detected. There were no warning lights illuminated. While removing items from the vehicle, the contact became aware of smoke in the rear seat near the heated seat, and the seat caught on fire. The contact noticed a huge hole in the driver's side rear seat. The contact was able to extinguish the fire. There were no reported injuries. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not notified. The failure mileage was approximately 1,400.

With 652 miles the vehicle initially went to the Ford Dealership due to pulling to the right on a straightaway road. It’s been back to two different dealerships on four more occasions and the vehicle still pulls hard to the right. Ford engineers have looked at it and the problem can’t be fixed. The vehicle now has 4,000 miles on it.

Seat Belt retractor would not allow me to extend seatbelt to wear it on 2 occasions in the last month