RoadVitals

2014 Ford F-53 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Newest Jul 2, 2014
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

1 campaign cover this model year — what the defect is, what it could cause, and what the remedy is

14V405000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER

Jul 2, 2014
635 units potentially affected
The defect: Ford Motor Company (Ford) is recalling certain model year 2014 F-53 motorhome chassis and F-59 commercial chassis manufactured February 14, 2014, to March 7, 2014. The affected chassis may have incorrectly machined brake calipers that may leak brake fluid.
The risk: Brake caliper leaks will cause longer brake pedal travel and lengthened stopping distances, increasing the risk of a crash.
The remedy: Ford has notified owners. Dealers will inspect the vehicles and replace the affected brake calipers, free of charge. The recall began on July 28, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S14.
Ford Motor CompanyManufacturer number 14S14View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE20021ClosedPreliminary Evaluation

Trimark 060-1650 Door Latch Failures

Opened Nov 23, 2020
Closed Dec 13, 2024

On November 23, 2020, the Office of Defects Investigation (ODI) opened PE20021 to investigate allegations of inoperative Trimark THP 060-1650 door lock/latches originally equipped on model years (MY) 2015-2017 Class A and Class C motorhomes.ODI received forty-six Vehicle Owner’s Questionnaires (VOQs) describing consumers being locked in or out of their vehicles.The door latch, containing a die-cast zinc plunger, was produced by Equality during calendar years 2014-2016. The die-cast may become porous and brittle over time and can break without warning, causing the vehicle owner to be unable to open the recreational vehicle door equipped with the latch.If the motorhome does not have any other doors such as some Class A models, occupants could be trapped inside, needing to climb out using the emergency exits. If locked out, owners would be unable to easily get in and retrieve children and pets. ODI analyzed the data provided by Trimark in response to its January 27, 2021 information request letter.Although an elevated failure rate was evident on a specific combination of plunger bolt, door lock/latch assembly and door, the data showed that most failures occurred within the first two years of service on the affected 2015-2017 vehicles.This data suggests that component failures generally would have already occurred.Further, ODI data reflects a downward trend in complaints after calendar year 2018 and for post- MY 2016 vehicles.This downward trend may be attributed Trimark's actions in 2016 such as changes in the manufacturing process of its zinc plunger component for the relevant population and its 2016 decision to switch to a steel plunger. In view of the nature of early-life failure, and failure rate trending downward for model years 2017 and newer, this Preliminary Evaluation (PE) is closed.  The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

EQUIPMENT

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .