VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR
2025 Ford Mustang Gtd
Recalls, owner-reported complaints, investigations and safety data
Overview
Our database contains no NHTSA owner-reported complaints for the 2025 Ford Mustang Gtd. 1 safety recall has been issued covering this model year; and 2 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Safety recalls
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
No owner complaints recorded for this model year
Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ELECTRICAL SYSTEM
This bulletin supersedes 26-2297. Reason for update: Add 2022-2025 Transit vehicles. Some of the vehicles listed in the model statement above equipped with SYNC4 may experience a blank center display screen or black center display screen after welcome animation. The rear-view camera will still function when shifting the vehicle to reverse under these conditions.
ELECTRICAL SYSTEM
Some 2025-2026 Mustang GTD vehicles built on or before 28-Sep-2026 may exhibit one or more of the following hydraulic system warning messages displayed in the instrument panel cluster (IPC): "Suspension Fault Speed Limited to 80 MPH", "Driver Selectable Suspension Fault", "Front Lift Not Available", "Drive Mode Not Available" and/or "Active Aero Fault". Diagnostic trouble codes (DTC) U0037, U0759, U075A, U075B, U075C, C0086, U0416, C1041, C1119, C1A03:A2, C1A04:A2, C1A05:A2, C1A06:A2, and/or P0EA7:19 may also be stored in the vehicle dynamics module (VDM) and/or powertrain control module (PCM). <br/><br/> This condition may be caused by VDM software that incorrectly detects or reports a suspension or hydraulic system fault. To correct the condition, reprogram the VDM using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 18B008 and labor operations 12651D and 12651D4.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
| Year | Complaints | Recalls | Investigations | Issue Index |
|---|---|---|---|---|
| 2026 | 0 | 1 | 0 | — |
| 2025Viewing | 0 | 1 | 0 | — |
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.