EQUIPMENT:APPLIANCE:AIR CONDITIONER
2022 Forest River FR3
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 2 NHTSA owner-reported complaints for the 2022 Forest River FR3, most frequently naming the other / unspecified category. 3 safety recalls have been issued covering this model year; and 6 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 2 months of data.
What owners report
Complaints grouped by the component NHTSA recorded
- Other / unspecified1100.0%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
3 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govEQUIPMENT:RECREATIONAL VEHICLE/TRAILER:LPG SYSTEMS:TANK ASSEMBLY
EQUIPMENT:RECREATIONAL VEHICLE/TRAILER
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
UNKNOWN Reading Facebook message boards for FR3 and Georgetown motorhomes became aware of possible propane mount cracking and possibility of propane tank falling out while driving. Upon looking at propane tank mounts, rear mount is cracked. Failure could result in propane tank falling out while driving and cause fire.
- NHTSA ID
- 11570219
- Incident
- Feb 4, 2024
Power Front Sun/Privacy Shade completely unrolled while driving on a 4-lane interstate going approximately 65 mph, completely blinding the driver from seeing the road, with truck traffic constantantly passing me. Unable to see where I was going at 65 mpg. Took the motorhome to the dealer. Manufacturer was notified. There was no warning prior to the shade unrolling while the vehicle was moving.
- NHTSA ID
- 11522755
- Incident
- May 13, 2023
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ELECTRICAL SYSTEM; EQUIPMENT:APPLIANCE:REFRIGERATOR
According to a Furrion TSB "TB-220919": Irregular cooling performance has been reported on the identified refrigerators. The refrigerator compressor has been found to stop working and requires a âÃÂÃÂhard resetâÃÂàby disconnecting power to reset cooling operation. On occasion, disconnecting power does not reset operation and the refrigerator requires service replacement of the control boards. This TSB may not be applicable for some vehicles.
EQUIPMENT; STRUCTURE
As per Lippert's TSB 85-001-2022 There is a potential for some of the Gen1 jack legs on motorized units to bend or deform under extreme side loads. Note: The notification letter did not change. There is a revision to the remedy by Lippert Components. Forest River previously filed this TSB as "511576".
SUSPENSION
According to Ford's Final Notice of Recall 22V731: "In some of the affected vehicles, the rear stabilizer bar attachment bracket(s) weld-nuts may not be capable of supporting the required joint torque for this application and may have been damaged during the assembly process. During vehicle usage, the weld nuts attaching the rear stabilizer bracket may loosen, and the attachment bracket may break and/or the attachment bolts and the bracket may separate from the vehicle. It is possible that this may result in a road debris hazard."
STRUCTURE
As per Lippert's TSB 85-001-2022: There is a potential for some of the Gen1 jack legs on motorized units to bend or deform under extreme side loads.
ELECTRICAL SYSTEM
Defect: Damaged PCB Via. How the defect present itself: Slide Motor will only operate in one direction and/or operate erratically.
STEERING; SUSPENSION
According to the notice from Ford 22S62: In some of the affected vehicles, the rear stabilizer bar attachment bracket(s) weld-nuts may not be capable of supporting the required joint torque for this application and may have been damaged during the assembly process. During vehicle usage, the weld nuts attaching the rear stabilizer bracket may loosen, and the attachment bracket may break and/or the attachment bolts and the bracket may separate from the vehicle. It is possible that this may result in a road debris hazard.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.