RoadVitals

2005 Freightliner Century Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Oct 13, 2011
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

STEERING:RACK AND PINION

Oct 13, 2011
9,689 units potentially affected
The defect: DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2005-2011 FREIGHTLINER CASCADIA, COLUMBIA, CENTURY, CORONADO, AND CLASSIC XL TRUCKS MANUFACTURED FROM NOVEMBER 1, 2004, THROUGH JUNE 15, 2010 FOR THE RACK AND PINION STEERING SYSTEM. THE LOWER PINION BEARING MAY CORRODE AND FAIL. A FAILED BEARING MAY LEAD TO DAMAGE OF THE SPOOL VALVE SEALS. A DAMAGE SPOOL VALVE SEAL MAY ALLOW HYDRAULIC FLUID TO FLOW TO THE RIGHT OR LEFT TURN PORT INSTEAD OF FLOWING TO THE RETURN PORT.
The risk: THE STEERING COULD UNEXPECTEDLY TURN LEFT OR RIGHT, MAKING THE VEHICLE MORE DIFFICULT TO CONTROL AND INCREASING THE RISK OF A CRASH.
The remedy: DAIMLER TRUCKS WILL INSPECT THE LOWER BEARING FOR CORROSION. IF CORROSION IS FOUND, THE RACK AND PINION SYSTEM WILL BE REPLACED. IF NO CORROSION IS FOUND, ON THE BEARING, THE BEARING WILL BE PACKED WITH GREASE AND THE RUBBER BELLOWS WILL BE REPLACED WITH SEALANT ADDED BETWEEN THE BELLOWS AND THE RACK HOUSING. AN INTERIM LETTER WAS MAILED IN DECEMBER 2011. OWNERS MAY CONTACT DAIMLER TRUCKS TOLL-FREE AT 1-800-547-0712.
DAIMLER TRUCKS NORTH AMERICAManufacturer number FL-614View on NHTSA.gov

STEERING:RACK AND PINION

Sep 16, 2009
8,882 units potentially affected
The defect: DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2010 HEAVY DUTY TRUCKS MANUFACTURED FROM OCTOBER 29, 2005 THROUGH JULY 3, 2009. UNDER CERTAIN CONDITION, THE LEFT HAND INNER TIE ROD END MAY LOOSEN OVER TIME AND IF NOT CORRECTED, POTENTIALLY SEPARATE FROM THE STEERING RACK.
The risk: A SEPARATED TIE ROD ASSEMBLY CAN RESULT IN LOSS OF VEHICLE CONTROL AT HIGHER SPEEDS AND A CRASH COULD OCCUR.
The remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS AND THE VEHICLES WILL BE REPAIRED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 5, 2010. OWNERS MAY CONTACT DAIMLER TRUCKS TOLL-FREE AT 1-800-547-0712.
DAIMLER TRUCKS NORTH AMERICAManufacturer number FL-557View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

AQ18002ClosedAudit Query

Daimler Trucks North America Recalls

Opened Apr 23, 2018
Closed Jul 11, 2024

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.

EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
PE09040ClosedPreliminary Evaluation

RACK AND PINION FAILURE

Opened Aug 31, 2009
Closed Nov 19, 2009

A CONSUMER COMPLAINT WAS FILED WITH THE AGENCY ON AUGUST 22, 2009, BY AN INDEPENDENT CONTRACTOR LEASING A 2009 FREIGHTLINER CASCADIA.THE COMPLAINT ALLEGES THAT IN APRIL OF 2009 AT APPROXIMATELY 50,000 MILES HE EXPERIENCED A SEAL RUPTURE IN THE RACK AND PINION ASSEMBLY.A NEW SEAL WAS INSTALLED AND AT 56,000 MILES HE FOUND HIS RIGHT STEER TIRE COMPLETELY BALD.THE REPAIR SHOP IDENTIFIED AN INTERNAL FAILURE OF THE RACK AND PINION ASSEMBLY CAUSING THE RAPID WEAR OF THE TIRE.ODI HAS IDENTIFIED EWR FIELD REPORTS RELATED TO FAILED RACK AND PINIONS ON THE SUBJECT VEHICLES.THE REPORTS IDENTIFY EITHER AN INTERNAL FAILURE OF THE RACK AND PINION ASSEMBLY THAT RESULTED IN CRASHES OR A LOOSENESS OF THE INNER TIE ROD END OF THE RACK AND PINION RESULTING IN A POOR ALIGNMENT AND PREMATURE TIRE WEAR.INFORMATION RECEIVED DURING THIS INVESTIGATION FROM FREIGHTLINER DETAILED FAILURES OF THE RACK AND PINION ASSEMBLIES ON THE SUBJECT VEHICLES.THESE FAILURES WERE THE RESULT OF THE LEFT HAND INNER TIE ROD END BECOMING LOOSE OVER TIME.WHEN THE TIE ROD BECOMES LOOSE, IT MAY SEPARATE FROM THE RACK AND PINION ASSEMBLY AND MAKE THE VEHICLE DIFFICULT TO STEER.FRIEGHTLINER HAS CONCLUDED THAT A DEFECT RELATED TO MOTOR VEHICLE SAFETY DOES EXIST ON THE SUBJECT VEHICLES AND HAS INITIATED A SAFETY RECALL (09V-357) THAT WILL REMEDY ALL OF THEM.THIS RECALL INVOLVES REMOVING THE TIE ROD AND ADDING A COMPOUND TO IT THAT WILL PREVENT THE TIE ROD FROM COMING LOOSE OVER TIME.A COPY OF THE RECALL IS ATTACHED.FREIGHTLINER'S ACTION RESOLVES THE ISSUES RAISED BY THIS INVESTIGATION AND, THEREFORE, THIS INVESTIGATION IS CLOSED.

STEERING:RACK AND PINIONLed to recall 09V357000

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .