RoadVitals

1985 GMC G30 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Newest Jul 6, 1988
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
3 investigations on file

Recall campaigns

1 campaign cover this model year — what the defect is, what it could cause, and what the remedy is

SUSPENSION:FRONT:CONTROL ARM:LOWER ARM

Jul 6, 1988
21,485 units potentially affected
The defect: LEFT HAND LOWER CONTROL ARM CAN CRACK AND COULD EVENTUALLY CAUSE THE LOWER BALL JOINT TO SEPARATE FROM THE CONTROL ARM.
The risk: LOSS OF STEERING CONTROL CAN OCCUR WHICH COULD RESULT INA CRASH WITHOUT PRIOR WARNING.
The remedy: REPAIR OR REPLACE LOWER LEFT CONTROL ARM.
GENERAL MOTORS CORP.View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA88016ClosedEngineering Analysis

HIGH TEMP & FUEL EXP

Opened Jan 19, 1988
Closed Jun 30, 1988

There is no summary currently available

VEHICLE SPEED CONTROL:LINKAGES
EA88007ClosedEngineering Analysis

LOWER CONTROL ARM

Opened Nov 6, 1987
Closed Oct 24, 1988

SUMMARY OF INFORMATION FROM MANUFACTURER:MANUFACTURER IS IN RECEIPT OFONE COMPLAINT AND FIVE FIELD REPORTS.PRODUCT REPORT ANALYSIS STATES THELOWER CONTROL ARM FROM WAGGONER CORPORATION APPEARS TO HAVE A SMALL RADIUSAT THE TRANSITION OF THE SIDE WALL TO THE BALL STUD NOSE.CURRENT STAMPINGSOURCE, S.K.D., ALSO HAS A SMALL RADIUS IN THE SAME AREA.S.K.D. HASCHANGED THE TRIM TO INCREASE THE RADIUS TO 1 INCH AND PROVIDE ADDITIONALSTRENGTH IN THE BALL STUD AREA.ANALYSIS:FAILURE DATA INDICATES THE LEFT CONTROL ARM AND DIESEL ENGINEAPPLICATION ARE OVER REPRESENTED.ALL KNOWN FAILURES HAVE OCCURRED AT LOWSPEEDS, OR HAVE BEEN LOCATED AS A RESULT OF AN INCREASE IN THE FREQUENCY OFMAINTENANCE INSPECTIONS.BALL JOINT SEPARATION COULD RESULT IN COLLAPSE OFFRONT WHEEL SUSPENSION AND LOSS OF VEHICLE CONTROL.ACTION: IR TO GM SENT 11/19/87 CONTACT FLEET OWNERS.===

SUSPENSIONLed to recall 88V110001
PE87056ClosedPreliminary Evaluation

LOWER CONTROL ARM FAILURE

Opened Sep 8, 1987
Closed Nov 6, 1987

SUMMARY OF INFORMATION FROM MANUFACTURER:MANUFACTURER IS IN RECEIPT OFONE COMPLAINT AND FIVE FIELD REPORTS.PRODUCT REPORT ANALYSIS STATES THELOWER CONTROL ARM FROM WAGGONER CORPORATION APPEARS TO HAVE A SMALL RADIUSAT THE TRANSITION OF THE SIDE WALL TO THE BALL STUD NOSE.CURRENT STAMPINGSOURCE, S.K.D., ALSO HAS A SMALL RADIUS IN THE SAME AREA.S.K.D. HASCHANGED THE TRIM TO INCREASE THE RADIUS TO 1 INCH AND PROVIDE ADDITIONALSTRENGTH IN THE BALL STUD AREA.ANALYSIS:DATA INDICATES 38 OF 40 FAILURES INVOLVE THE LEFT CONTROL ARM,39 OF THE VEHICLES ARE POWERED BY THE DIESEL ENGINE.ALL FAILURES HAVEOCCURRED AT LOW SPEEDS, OR HAVE BEEN LOCATED DURING INCREASED FREQUENCYMAINTENANCE INSPECTIONS.SEPARATION OF THE BALL JOINT FROM THE CONTROLARM COULD CAUSE ONE SIDE OF THE FRONT WHEEL SUSPENSION TO COLLAPSE,POSSIBLY RESULTING IN LOSS OF VEHICLE CONTROL.PROPOSED ACTION:UPGRADE THIS PE TO AN EA.===

SUSPENSION

Elsewhere on this vehicle

Data sources