RoadVitals

1999 GMC P32/42

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
1
Latest Jan 12, 2004
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
0
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 1 NHTSA owner-reported complaint for the 1999 GMC P32/42, most frequently naming the brakes category. 8 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Brakes1100.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

No recalls in our database for this model year

That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Brakes
Filed Jan 12, 2004

WHILE DRIVING CONSUMER HEARD A NOISE COMING FROM OUTSIDE OF THE VEHICLE. DRIVER PULLED OVER TO INSPECT THE VEHICLE, WHEN WITHOUT WARNING ,THE VEHICLE ROLLED BACKWARDS ON A SLIGHT DECLINING RAMP. CONSUMER WAS ABLE TO JUMP IN TO THE VEHICLE TO STOP IT FROM ROLLING. CONSUMER STATED THAT THE HYDRAULIC PUMP FAILED. *AK UPON FURTHER INSPECTION OF THE PUMP THE CONSUMER FOUND THE FLUID CONTAMINATED WITH WATER AND ROAD SILT DUE TO A DEFORMED PLASTIC FLUID RESERVOIR. THE CONSUMER HAS THE OLD PART IN HIS POSSESSION. *NM

NHTSA ID
10048124
Incident
Nov 9, 2003
Mileage
24,392 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

17-NA-073

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

This warranty administration bulletin provides information regarding the field action courtesy transportation policy.

Recalls

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

Vehicle Recalls

99-08-51-007F

EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS

Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.

99-08-51-007F

EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS

Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.

PI0281D

EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS

Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.

PI0281D

EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS

Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.