RoadVitals

1984 GMC P35 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Aug 25, 1986
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

Aug 25, 1986
46 units potentially affected
The defect: THREE BOLTS WHICH ATTACH THE SILL THAT SUPPORTS THE BASE OF THE SEAT WERE OMITTED; THEREFORE VEHICLES DO NOT COMPLY WITH FMVSS 210 AND FMVSS 207. CONSEQUENCE OF DEFECT: IN THE EVENT OF A CRASH, THE FLOOR PLATE COULD BUCKLE ALONG THE INBOARD SIDE CAUSING THE SEAT PEDESTAL TO BE IMBALANCED, AND INCREASING THE LIKELIHOOD OF INJURY TO THE SEAT OCCUPANT.
The remedy: INSTALL MISSING BOLTS.
GENERAL MOTORS CORP.View on NHTSA.gov

ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Oct 15, 1985
383 units potentially affected
The defect: THE FAN BLADE, WHEN SUBJECTED TO HIGH STRESS LEVELS, CAN FATIGUE AND BREAK APART AT THE HUB WHILE THE ENGINE IS RUNNING. CONSEQUENCE OF DEFECT: IF BREAKAGE OCCURS WHILE HOOD IS OPEN, A PERSON WORKING UNDER THE HOOD OR NEAR THE TRUCK COULD BE STRUCK BY A BLADE PART AND BE INJURED.
The remedy: REPLACE ENGINE FAN.
GENERAL MOTORS CORP.View on NHTSA.gov

FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP

Oct 16, 1984
11,305 units potentially affected
The defect: DUE TO A MANUFACTURING PROBLEM WITH THE FUEL TANK FILLER PIPE, THE FUEL CAP MAY IMPROPERLY SEAL THE END OF THE FILLER PIPE. THIS FAILS TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 301, "FUEL SYSTEM INTEGRITY." IN THE EVENT OF A COLLISION, AN IMPROPERLY SEALED FILLER PIPE COULD ALLOW FUEL SPILLAGE.
The remedy: THE DEALER WILL INSPECT AND REPLACE FUEL CAPS ON ALL AFFECTED VEHICLES WITHOUT CHARGE.
GENERAL MOTORS CORP.View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources