RoadVitals

1999 Harley-Davidson Flhp

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Mar 18, 2004
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 1999 Harley-Davidson Flhp. 2 safety recalls have been issued covering this model year; and 2 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
04V134000

ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS

Mar 18, 2004
81,496 units potentially affected
The defect: ON CERTAIN TOURING AND POLICE MODEL MOTORCYCLES, THE 40 AMP MAIN CIRCUIT BREAKER CAN "OPEN" FOR REASONS OTHER THAN WHICH IT WAS DESIGNED, CAUSING AN UNEXPECTED INTERRUPTION OF ALL ELECTRICAL POWER TO THE MOTORCYCLE.
The risk: THIS CONDITION COULD CAUSE THE MOTORCYCLE TO STALL, WHICH COULD RESULT IN A CRASH.
The remedy: DEALERS WILL REPLACE THE CIRCUIT BREAKER. OWNER NOTIFICATION BEGAN APRIL 23, 2004. OWNERS SHOULD CONTACT HARLEY-DAVIDSON AT 1-414-343-4056.
HARLEY-DAVIDSON MOTOR COMPANYManufacturer number 0113View on NHTSA.gov
99V003000

ENGINE AND ENGINE COOLING:ENGINE:GASOLINE

Jan 13, 1999
14,211 units potentially affected
The defect: VEHICLE DESCRIPTION: MOTORCYCLES. THE ENGINE CAM BOLT CAN LOSE ITS CLAMP LOAD AND/OR BREAK.
The risk: THIS CONDITION CAN CAUSE THE ENGINE TO QUIT RUNNING WITH OR WITHOUT PRIOR WARNING. IN SOME INSTANCES, THE ENGINE COULD RUN ERRATICALLY BEFORE QUITTING.
The remedy: DEALERS WILL REPLACE THE ENGINE CAM BOLTS AND WASHERS.
HARLEY-DAVIDSON MOTOR COMPANYManufacturer number 095View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

M1534

EQUIPMENT

SERVICE BULLETIN M1534: Police – Speaker Bracket. PURPOSE: This bulletin is to inform dealers that Harley-Davidson has identified Police models that have an obsolete bracket (Part No. 76000856) installed, which can damage the front fender while operating. Replacement of any obsolete brackets is required. Motorcycles Impacted: Any Police Motorcycle could be impacted. Key Dates: New replacement parts began shipping 8/1/2021.

1HDM5V2A05

POWER TRAIN

TECH ARTICLE TA0023: TA0023: Crankshaft Rod Bearing. Purpose: Technicians have been falsely identifying connecting rod bearings as failed due to a perception of resistance as the rods are rotated. The clearance of the Twin Cam and Milwaukee-Eight® crank pin bearings are maintained to a very tight range. This optimizes performance and maintains low mechanical noise in operation. The connecting rod bore can also distort slightly in operation due to stress relaxation. As a result, bearing clearance decreases due to the contact zone broadening and the load being distributed over more rollers. The combination of a bore being slightly out of round and reduced bearing clearance can result in varying degrees of resistance through the range of motion. Axial clearance is also tightly controlled for proper alignment. For these reasons, zones of resistance can be found when the connecting rods are rotated by hand through their range of motion. Resistance during rod motion, by itself, is not an indication of a performance or durability concern.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Harley-Davidson Flhp by model year
YearComplaintsRecallsInvestigationsIssue Index
2025100—
2024000—
2023000—
2022010—
2021010—
2020010—
2019000—
2018010—
2017020—
2016000—
2015210—
2014220—
2013100—
2012110—
2011421—
2010531—
2009731—
2008521—
2007110—
2005010—
2000010—
1999Viewing020—
1998000—
1997000—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.