RoadVitals

2008 Harley-Davidson Flhrs

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
0
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2008 Harley-Davidson Flhrs. 1 NHTSA investigation names it; and 11 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

No recalls in our database for this model year

That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

PE16009ClosedPreliminary Evaluation

Sudden Brake Failure - Motorcycle

Opened Jul 6, 2016
Closed Apr 23, 2018

The Office of Defects Investigation (ODI) opened this investigation in July 2016 based on forty-three (43) Vehicle Owner Questionnaires (VOQ).During the course of this investigation ODI received a total of 145 VOQs related to the alleged defect on the subject motorcycles.Owners allege they experience a sudden and complete loss of brakes on one or both wheels.To better understand the cause of the braking issue on the subject motorcycles, ODI requested NHTSA's Vehicle Research and Test Center (VRTC) conduct inspections and testing of affected vehicle braking systems.Through its work, VRTC determined that deposits were forming on the valves in the Hydraulic Control Unit (HCU) of the Antilock Braking System (ABS). These deposits could prevent the proper function of the HCU and render the brakes ineffective.To understand why deposits were forming in the HCU, Harley Davidson completed an analysis of the Dow 460 brake fluid used as original equipment on the subject motorcycles and determined that it had stability issues if left in the brake system for an extended period of time.Harley Davidson found that if a brake fluid flush was not conducted as outlined in the owner?s manual for the motorcycles, and was left in the system for a period of time beyond their recommendation; deposits could form in the HCU.Through further testing, Harley Davidson identified an alternate, commercially available, brake fluid that did not have the same stability issues as the original fluid and could stop the proliferation of any current brake system deposits.ODI sent Information Request (IR) letters to Harley Davidson and Dow Chemical (the supplier of the brake fluid on the subject motorcycles) to collect information about the subject bikes and the alleged defect.Harley Davidson responded in full on Sept 30, 2016 and Dow responded with a confidential submission on October 25, 2017.ODI analyzed the information contained in both IR responses and concluded that motorcycles manufactured during Model Years (MY) 2008, 2009, 2010, and 2011 were failing at a rate greater than their peers.Based on this analysis and the brake fluid study conducted by Harley Davidson, a group of motorcycles was identified that were potentially affected by the instability of the original brake fluid.2008 marked the introduction of ABS on Harley Davidson motorcycles and a change in the Dow 460 brake fluid used in the 2012 MY vehicles provided the bases for the scope of the affected population.With recall action 18V-076 taken by Harley Davidson this investigation is closed as further use of agency resources does not appear to be warranted.The ODI reports cited above can be reviewed at: https://www.nhtsa.gov/ using the complaint identification numbers attached to this resume.

SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULELed to recall 18V076000

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

M1684

ELECTRICAL SYSTEM

SERVICE BULLETIN M1684: MARKET SPECIFIC BATTERY INTRODUCTION. PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.

M1650

ENGINE; FUEL/PROPULSION SYSTEM; POWER TRAIN; VEHICLE SPEED CONTROL

SERVICE BULLETIN M1650: MILWAUKEE EIGHT AND TWIN CAM CAMSHAFT DRIVE GEAR RETENTION KIT CHANGES. PURPOSE: This bulletin informs dealers that changes have been made to the Camshaft Drive Gear Retention Kit and service proceduresfor the Milwaukee-Eight and Twin Cam applications. In an effort to increase the clamp load of the camshaft drive sprocket bolted joint and prevent the drive bolt from loosening in high lift camshaft applications, the following changes have been made: a. The camshaft drive bolt final torque has been increased to 40 ft-lbs (54 N·m) for all Milwaukee-Eight and certain Twin Cams models. See Vehicles Affected. This increase in torque will make the bolt a one time use application. Never re-use a camshaft drive bolt for service after tightening to the increased specification. See service manual for updated procedure. b. A new camshaft drive gear retention kit (Part No. 91800088) has been created. This new kit is compatible with all Milwaukee-Eight and Twin Cam engines using Parts and Accessories (P&A) camshaft and Original Equipment (OE) camshaft applications. See Instruction sheet for specific fitment on Twin Cam OE camshaft applications. The new kit utilizes friction washers to prevent unwanted rotation of components in the drive sprocket bolted joint under stress. The use of liquid threadlocker on the threads of the bolt and pre-lube to the head of the bolt flange and outside of the washer help the bolt reach full stretch when tightening. NOTE: Engines produced at all Harley-Davidson Motor Company (HDMC) plants will not come with the new kits installed. They will continue to be produced with (Part No. 25566-06).

M1555

ELECTRICAL SYSTEM

SERVICE BULLETIN M1555 (REV E): BATTERY WARRANTY GUIDELINES. PURPOSE: Revision E. Added: Added procedures for the DCA-8000 E Battery Tester.* Updated: All sections. This bulletin informs the dealership network that Harley-Davidson has provided guidelines for battery warranty.

M1490

ELECTRICAL SYSTEM

SERVICE BULLETIN M1490 (V 24.8.8): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.8.8. Release Date: Week of August 5, 2024. New Features for Harley-Davidson vehicles: Advanced Module Replace for 2021 and later Revolution Max; 2023 and later CVO Touring; and 2024 Street Glide (FLHX), Road Glide (FLTRX). New Features for LiveWire vehicles: Updated calibrations for 2024 S2DM EV1/ EV6; 2024 S2MH EV1; and 2024 S2DM, S2MH. Changes: Added Hand Control Module (HCM) (Part No. 71500522A and 71500536A) for reflash support.

PAB1158

ENGINE; POWER TRAIN

GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1158: OIL FILTER PACKAGING AND CASE QUANTITY UPDATE. PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.

M1490

ELECTRICAL SYSTEM

SERVICE BULLETIN M1490 (V 24.6.4): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.6.4. Release Date: Week of May 1, 2024. New Features for LiveWire S2DM and S2MH, 2024 Revolution® Max, and 2024 Touring.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Harley-Davidson Flhrs by model year
YearComplaintsRecallsInvestigationsIssue Index
2008Viewing001
2007300
2006000
2005000
2004000
2003010

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.