Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Our database contains 4 NHTSA owner-reported complaints for the 2006 Harley-Davidson Fxdci, most frequently naming the engine, electrical and powertrain (other) categories. 8 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
When owners filed reports about this model year
| Month | Complaints filed | Cumulative |
|---|---|---|
| Aug 2006 | 1 | 1 |
| Dec 2006 | 1 | 2 |
| Jun 2008 | 1 | 3 |
| Apr 2012 | 1 | 4 |
Complaints grouped by the component NHTSA recorded
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
No recalls in our database for this model year
That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.
Reports submitted to NHTSA, shown in the owner's own words
TL* THE CONTACT OWNS A 2006 HARLEY DAVIDSON DYNA FXDCI MOTORCYCLE. THE CONTACT WAS DRIVING 75 MPH WHEN A BLOWING NOISE WAS HEARD FROM THE DRIVE CASE. THE VEHICLE WAS TAKEN TO THE DEALER AND THE MANUFACTURER WAS CONTACTED. THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 19,000 AND THE CURRENT MILEAGE WAS 20,000.
TL*THE CONTACT OWNS A 2006 HARLEY DAVIDSON FXDCI. THE CONTACT PURCHASED THE VEHICLE AT AN AUTHORIZED DEALER AND WAS UNAWARE THAT IT WAS NOT EPA CERTIFIED. WHEN THE VEHICLE IS STARTED, THE MUFFLER MAKES A VERY LOUD NOISE. THE BAFFLES ARE ALSO LOOSENING, WHICH ARE PART OF THE MUFFLER. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER ON THREE OCCASIONS FOR THIS FAILURE TO BE REPAIRED. THE MECHANIC ATTEMPTED TO REPAIR THE BAFFLES, BUT THE FAILURE CONTINUED. THE MECHANIC STATED THAT THE MUFFLER NEEDED TO BE REPLACED. THE VEHICLE HAS NOT BEEN REPAIRED. THE CURRENT AND FAILURE MILEAGES WERE 25,000.
DT*: THE CONTACT STATED THAT THE ENGINE MADE A NOISE AFTER DRIVING 30 MINUTES. THE VEHICLE WAS TAKEN TO THE SERVICE DEALER, WHO REPLACED THE CYLINDER AND PISTON KIT. UPDATED 01/17/07. *JB
DT*: THE CONTACT STATED THE MOTORCYCLE CAUGHT FIRE HOWEVER THERE WAS NO KNOWN REASON FOR WHAT CAUSED THE FIRE. THE INSURANCE COMPANY DETERMINED THE MOTORCYCLE WAS TOO BADLY BURNED TO DETERMINE A CAUSE. THE FIREFIGHTERS EXPRESSED THE GAS TANK AND ELECTRONIC MODULE MAY HAVE EXPLODED WHICH COULD HAVE CAUSED THE FIRE.*AK
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ELECTRICAL SYSTEM
SERVICE BULLETIN M1684: MARKET SPECIFIC BATTERY INTRODUCTION. PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.
ENGINE; FUEL/PROPULSION SYSTEM; POWER TRAIN; VEHICLE SPEED CONTROL
SERVICE BULLETIN M1650: MILWAUKEE EIGHT AND TWIN CAM CAMSHAFT DRIVE GEAR RETENTION KIT CHANGES. PURPOSE: This bulletin informs dealers that changes have been made to the Camshaft Drive Gear Retention Kit and service proceduresfor the Milwaukee-Eight and Twin Cam applications. In an effort to increase the clamp load of the camshaft drive sprocket bolted joint and prevent the drive bolt from loosening in high lift camshaft applications, the following changes have been made: a. The camshaft drive bolt final torque has been increased to 40 ft-lbs (54 N·m) for all Milwaukee-Eight and certain Twin Cams models. See Vehicles Affected. This increase in torque will make the bolt a one time use application. Never re-use a camshaft drive bolt for service after tightening to the increased specification. See service manual for updated procedure. b. A new camshaft drive gear retention kit (Part No. 91800088) has been created. This new kit is compatible with all Milwaukee-Eight and Twin Cam engines using Parts and Accessories (P&A) camshaft and Original Equipment (OE) camshaft applications. See Instruction sheet for specific fitment on Twin Cam OE camshaft applications. The new kit utilizes friction washers to prevent unwanted rotation of components in the drive sprocket bolted joint under stress. The use of liquid threadlocker on the threads of the bolt and pre-lube to the head of the bolt flange and outside of the washer help the bolt reach full stretch when tightening. NOTE: Engines produced at all Harley-Davidson Motor Company (HDMC) plants will not come with the new kits installed. They will continue to be produced with (Part No. 25566-06).
ELECTRICAL SYSTEM
SERVICE BULLETIN M1490 (V 24.8.8): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.8.8. Release Date: Week of August 5, 2024. New Features for Harley-Davidson vehicles: Advanced Module Replace for 2021 and later Revolution Max; 2023 and later CVO Touring; and 2024 Street Glide (FLHX), Road Glide (FLTRX). New Features for LiveWire vehicles: Updated calibrations for 2024 S2DM EV1/ EV6; 2024 S2MH EV1; and 2024 S2DM, S2MH. Changes: Added Hand Control Module (HCM) (Part No. 71500522A and 71500536A) for reflash support.
ENGINE; POWER TRAIN
GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1158: OIL FILTER PACKAGING AND CASE QUANTITY UPDATE. PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.
ELECTRICAL SYSTEM
SERVICE BULLETIN M1490 (V 24.6.4): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.6.4. Release Date: Week of May 1, 2024. New Features for LiveWire S2DM and S2MH, 2024 Revolution® Max, and 2024 Touring.
ENGINE AND ENGINE COOLING; POWER TRAIN; VEHICLE SPEED CONTROL
SERVICE BULLETIN M1612 (REV A): MILWAUKEE-EIGHT AND TWIN CAM TRANSMISSION GEAR PACKS. Purpose: Revision. Update: Notes for Table 3 and 4. * Updated: Part Numbers. This bulletin informs dealers that all: Twin Cam gear packs on CVO, Dyna, Police, Softail, Touring & Trike models and Milwaukee-Eight gear packs on CVO, Police, Softail, Touring & Trike models ordered after December 04, 2023 will not come with the shift drum, forks, shafts and related hardware. Models Affected: 2006-2017 Twin Cams: Dyna models 2007-2016 Twin Cams: CVO, Police, Touring and Trike models 2007-2017 Twin Cams: Softail models 2017-2024 Milwaukee-Eight: CVO, Police, Touring and Trike models 2018-2024 Milwaukee-Eight: Softail models
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Complaint and recall counts across every year of this model
| Year | Complaints | Recalls | Investigations | Issue Index |
|---|---|---|---|---|
| 2006Viewing | 4 | 0 | 0 | — |
| 2005 | 0 | 1 | 0 | — |
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.