RoadVitals

2006 Harley-Davidson Fxdli

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
6
Latest Aug 9, 2019
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
0
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 6 NHTSA owner-reported complaints for the 2006 Harley-Davidson Fxdli, most frequently naming the electrical, steering and body & structure categories. 8 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Electrical325.0%
  • Steering216.7%
  • Body & structure216.7%
  • Engine18.3%
  • Powertrain (other)18.3%
  • Transmission18.3%
  • Brakes18.3%
  • Driver assistance18.3%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

No recalls in our database for this model year

That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Body & structureSteering
Filed Aug 9, 2019

TL* THE CONTACT OWNS A 2006 HARLEY-DAVIDSON LOW RIDER FXDLI. WHILE DRIVING 35 MPH, THE STEERING WHEEL BECAME LOOSE WHILE DRIVING OVER BUMPS AND THERE WAS AN ABNORMAL RATTLING NOISE. ADDITIONALLY, THE FORK LOCK WAS INOPERABLE. THE CONTACT CALLED MYRTLE BEACH HARLEY-DAVIDSON (4710 S KINGS HWY, MYRTLE BEACH, SC 29575, (843) 369-5555), BUT WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOT CONTACTED. THE FAILURE MILEAGE WAS 24,500.

NHTSA ID
11242802
Incident
Jun 1, 2019
Mileage
24,500 mi
Body & structureElectricalSteering
Filed Oct 4, 2013

PURCHASED 2006 HARLEY DAVIDSON FXDLI FOR MY WIFE IN 2007, WE HAVE HAD A PROBLEM WITH IGNITION CYLINDER/FORK LOCK MECHANISM FOR SOME TIME. ISSUE IS THAT IT TAKES MORE EFFORT THAN REALLY NECESSARY TO OPERATE, WHETHER REMOVING THE KEY OR PLACING IN THE START POSITION. CAN NOT FEEL THE SWITCH DETENT POINTS ACCURATELY AT ALL TIMES. MOTORCYCLE HAS BEEN TO THE DEALER SEVERAL TIMES TO HAVE CYLINDER REPLACED OR ADJUSTED. AT ONE POINT MY WIFE AND I WENT FOR A RIDE BUT SOMEWHERE BETWEEN POINT "A" AND POINT "B"....THE KEY FELL OUT. BEING THAT WE WERE AT POINT "B", MANY MILES FROM HOME, THERE WAS NO WAY TO PLACE THE IGNITION SWITCH IN THE "LOCK" POSITION LET ALONE TURN OFF LIGHTS. I ENDED UP REMOVING THE MAIN FUSE FROM THE MOTORCYCLE AND PUTTING IN MY POCKET. NOTHING WE COULD DO TO PLACE THE BIKE IN "LEVEL ONE" SECURITY (LOCKING IGNITION AND FORKS) OR "LEVEL TWO" BY ACTIVATING THE FACTORY INSTALLED SECURITY SYSTEM DUE TO THE MAIN FUSE BEING REMOVED. WE HAD A SPARE KEY AT HOME, SHE NOW KEEPS IT TETHERED BY THE KEY CYLINDER WHEN RIDING. WOULD BE NICE IF REMEDY WAS TO RELOCATE IGNITION SWITCH AWAY FROM FORK LOCK MECHANISM (LIKE THEY HAVE EVER SINCE THE 2007 DYNA MODEL ROLLED OUT I BELIEVE BUT NOT SURE), MAYBE A KIT FOR RELOCATING UNDER SEAT BY FUSE BOX. *TR

NHTSA ID
10546811
Incident
Oct 4, 2013
Driver assistanceElectrical
Filed Oct 4, 2013

PURCHASED 2006 FXDLI IN 2007 FOR MY WIFE, WE HAVE HAD PROBLEMS WHERE THE SPEEDOMETER STOPS WORKING. NO WARNING, NO "CHECK ENGINE" LIGHT ILLUMINATION DURING OCCURRENCE (HENCE NO TROUBLE CODE STORED). SPEEDO FAILS INTERMITTENT, CYCLE HOT OR COLD, WHILE DRIVING OR FROM STOP. MOTORCYCLE IS EQUIPPED WITH A TACHOMETER AS WELL, IT CONTINUES TO FUNCTION NORMALLY. WHEN SPEEDO FAILS, MOTORCYCLE RUNS ROUGH AND WILL DIE WHEN COMING TO A STOP. TOOK BACK TO DEALER SEVERAL TIMES, WITH ISSUE INTERMITTENT, SPEEDO WORKS FINE FOR THEM. BEING PERSISTENT, THEY CLEANED SPEED SENSOR (NO CHANGE), SENSOR HAS YET TO BE REPLACED. I ORDERED NEW SPEEDOMETER ($500.00 OUT OF MY POCKET) AND HAD THEM INSTALL IT, NO CHANGE. RODE MOTORCYCLE TO HARLEY DAVIDSON PLANT IN KANSAS CITY, MY WIFE AND I PERSONALLY SPOKE WITH STAFF AND THEY WERE OF NO HELP. ISSUE CONTINUES TO THIS DAY. *TR

NHTSA ID
10546808
Incident
Oct 4, 2013
Powertrain (other)
Filed Aug 6, 2013

TL* THE CONTACT OWNS A 2006 HARLEY DAVIDSON FXDLI MOTORCYCLE. THE CONTACT STATED THAT THE VEHICLE WAS INCLUDED AND REPAIRED UNDER A MANUFACTURER'S RECALL. THE CONTACT STATED THAT LATER WHILE DRIVING APPROXIMATELY 35 MPH, THE VEHICLE DECELERATED INDEPENDENTLY. THE CONTACT ALSO NOTICED A VIBRATION FROM THE FRONT END OF THE VEHICLE. THE CONTACT INSPECTED THE VEHICLE AND NOTICED GREASE LEAKING FROM THE FRONT WHEEL BEARINGS. THE CONTACT REPLACED THE FRONT WHEEL BEARINGS BUT THE FAILURE CONTINUED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE AND STATED THAT THE RECALL REPAIR WAS PREVIOUSLY PERFORMED. NO FURTHER ASSISTANCE WAS PROVIDED. THE VEHICLE WAS NOT REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 11,000. *TR

NHTSA ID
10533853
Incident
Apr 15, 2010
Mileage
11,000 mi
BrakesTransmission
Filed Oct 3, 2008

ROTOR AND STATOR FAILURE DUE TO SCREWS BACKING OUT AND SHEARING DAMAGING REGULATOR CLUTCH PRIMARY DRIVE CHAIN LOSS OF ELECTRICAL SYSTEM AND ENGINE FAILURE! PARTS REPLACED WITH NEW REVISION KIT B. *TR

NHTSA ID
10244345
Incident
Sep 25, 2008
Mileage
18,000 mi
ElectricalEngine
Filed Aug 29, 2006

DT*: THE CONTACT STATED THE MOTORCYCLE WAS LOSING POWER, AS IF IT LOST HALF THE POWER OF THE MOTOR. THIS OCCURRED WHETHER ACCELERATING OR NOT. IT HAS BEEN A CONSISTENT PROBLEM THAT HAS ALMOST CAUSED AN ACCIDENT. THE SERVICE DEALER COULD NOT DETERMINE THE CAUSE OF THE PROBLEM. THE MOTORCYCLE LOOSES POWER WHEN ACCELERATING OR AT S STEADY THROTTLE. UPDATED 10/04/06. *JB

NHTSA ID
10167007
Incident
Jul 31, 2006
Mileage
1,100 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

M1684

ELECTRICAL SYSTEM

SERVICE BULLETIN M1684: MARKET SPECIFIC BATTERY INTRODUCTION. PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.

M1650

ENGINE; FUEL/PROPULSION SYSTEM; POWER TRAIN; VEHICLE SPEED CONTROL

SERVICE BULLETIN M1650: MILWAUKEE EIGHT AND TWIN CAM CAMSHAFT DRIVE GEAR RETENTION KIT CHANGES. PURPOSE: This bulletin informs dealers that changes have been made to the Camshaft Drive Gear Retention Kit and service proceduresfor the Milwaukee-Eight and Twin Cam applications. In an effort to increase the clamp load of the camshaft drive sprocket bolted joint and prevent the drive bolt from loosening in high lift camshaft applications, the following changes have been made: a. The camshaft drive bolt final torque has been increased to 40 ft-lbs (54 N·m) for all Milwaukee-Eight and certain Twin Cams models. See Vehicles Affected. This increase in torque will make the bolt a one time use application. Never re-use a camshaft drive bolt for service after tightening to the increased specification. See service manual for updated procedure. b. A new camshaft drive gear retention kit (Part No. 91800088) has been created. This new kit is compatible with all Milwaukee-Eight and Twin Cam engines using Parts and Accessories (P&A) camshaft and Original Equipment (OE) camshaft applications. See Instruction sheet for specific fitment on Twin Cam OE camshaft applications. The new kit utilizes friction washers to prevent unwanted rotation of components in the drive sprocket bolted joint under stress. The use of liquid threadlocker on the threads of the bolt and pre-lube to the head of the bolt flange and outside of the washer help the bolt reach full stretch when tightening. NOTE: Engines produced at all Harley-Davidson Motor Company (HDMC) plants will not come with the new kits installed. They will continue to be produced with (Part No. 25566-06).

M1490

ELECTRICAL SYSTEM

SERVICE BULLETIN M1490 (V 24.8.8): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.8.8. Release Date: Week of August 5, 2024. New Features for Harley-Davidson vehicles: Advanced Module Replace for 2021 and later Revolution Max; 2023 and later CVO Touring; and 2024 Street Glide (FLHX), Road Glide (FLTRX). New Features for LiveWire vehicles: Updated calibrations for 2024 S2DM EV1/ EV6; 2024 S2MH EV1; and 2024 S2DM, S2MH. Changes: Added Hand Control Module (HCM) (Part No. 71500522A and 71500536A) for reflash support.

PAB1158

ENGINE; POWER TRAIN

GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1158: OIL FILTER PACKAGING AND CASE QUANTITY UPDATE. PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.

M1490

ELECTRICAL SYSTEM

SERVICE BULLETIN M1490 (V 24.6.4): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.6.4. Release Date: Week of May 1, 2024. New Features for LiveWire S2DM and S2MH, 2024 Revolution® Max, and 2024 Touring.

M1612

ENGINE AND ENGINE COOLING; POWER TRAIN; VEHICLE SPEED CONTROL

SERVICE BULLETIN M1612 (REV A): MILWAUKEE-EIGHT AND TWIN CAM TRANSMISSION GEAR PACKS. Purpose: Revision. Update: Notes for Table 3 and 4. * Updated: Part Numbers. This bulletin informs dealers that all: Twin Cam gear packs on CVO, Dyna, Police, Softail, Touring & Trike models and Milwaukee-Eight gear packs on CVO, Police, Softail, Touring & Trike models ordered after December 04, 2023 will not come with the shift drum, forks, shafts and related hardware. Models Affected: 2006-2017 Twin Cams: Dyna models 2007-2016 Twin Cams: CVO, Police, Touring and Trike models 2007-2017 Twin Cams: Softail models 2017-2024 Milwaukee-Eight: CVO, Police, Touring and Trike models 2018-2024 Milwaukee-Eight: Softail models

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Harley-Davidson Fxdli by model year
YearComplaintsRecallsInvestigationsIssue Index
2006Viewing600
2005000
2004010
2003010

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.