RoadVitals

1978 Hendrickson RE305 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest May 28, 1980
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

SUSPENSION:REAR

May 28, 1980
75 units potentially affected
The defect: THE BOLTS THAT CLAMP THE MOR/RYDE SUSPENSION BEAM AND LOWER MOUNTING PLATE TO THE AXLE MAY BREAK AS A RESULT OF MISALIGNMENT OF THE BOLTS DUE TO NON-PARALLEL SURFACES OF THE UPPER BEAM PLATE AND THE LOWER BOTTOM PLATE. ANOTHER CONTRIBUTING FACTOR IS THE ABSENCE OF SHEAR BLOCKS TO THE UPPER SPACER PAD.
The remedy: MANUFACTURER WILL INSTALL NEW MOR/RYDE BEAM ASSEMBLIES, LOWER MOUNTING PLATES, BOLTS, NUTS AND WASHERS.
HENDRICKSON MFG. CO.View on NHTSA.gov

SERVICE BRAKES, AIR:DRUM:SHOES/LININGS

Oct 25, 1978
31 units potentially affected
The defect: THE BRAKE SHOE WELDS ON THE REAR BRAKE ASSEMBLIES COULD FAIL AT THE POINT WHERE THE WELD JOINS THE BRAKE SHOE TABLE. A BROKEN WELD COULD RESULT IN LOSS OF BRAKING CAPABILITY.
The remedy: THE BRAKE SHOE ASSEMBLIES WILL BE INSPECTED AND REPLACED, IF NECESSARY.
HENDRICKSON MFG. CO.View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources