RoadVitals

2014 Honda CBR1000S

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Apr 17, 2015
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2014 Honda CBR1000S. 1 safety recall has been issued covering this model year; and 5 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
15V230000

SUSPENSION:REAR:SHOCK ABSORBER

Apr 17, 2015
504 units potentially affected
The defect: Honda (American Honda Motor Co.) is recalling certain model year 2014 Honda CBR1000S motorcycles manufactured December 9, 2013, to March 28, 2014, and 2015 Honda CBR1000S motorcycles manufactured October 20, 2014, to February 27, 2015. The affected motorcycles may have been built with an improperly manufactured rear shock absorber. The nut on the damper rod for these shock absorbers may loosen, resulting in a loss of damping and the possible disassembling of the shock.
The risk: If the damper rod nut loosens, shock absorber performance would be affected, possibly causing a loss of vehicle control and increasing the risk of a crash.
The remedy: Honda will notify owners, and dealers will remove the shock assembly and send it to the supplier's service center for repair. Once repaired, the supplier's service center will ship the shock assembly back to the dealer and the dealership will reinstall the shock on the motorcycle. This work will be performed free of charge. The recall began on May 8, 2015. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is JQ3.
Honda (American Honda Motor Co.)Manufacturer number JQ3View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

Service Bulletin

EQUIPMENT:MECHANICAL; SUSPENSION:REAR:SHOCK ABSORBER

Service bulletin - Honda has determined that a defect which relates to motor vehicle safety exists in affected units. During assembly of the rear shock, the piston nut may not have been correctly torqued. An improperly torqued piston nut could affect the performance of the rear shock, which may cause the rider to lose control of the motorcycle, increasing the risk of a crash.

DLR MSG - Servic

SUSPENSION; SUSPENSION:REAR:SHOCK ABSORBER

Dealer message - Honda is posting the Service Bulletin in support of the SAFETY RECALL on 2014-2015 CBR1000S (CBR1000RR Special Edition) motorcycles for a potentially defective rear shock absorber assembly.

DLR MSG - MC - S

EQUIPMENT:MECHANICAL; SUSPENSION:REAR:SHOCK ABSORBER

Dealer message - Honda is launching a SAFETY RECALLon certain model year 2014-2015 CBR1000S (Special Edition)motorcycles for a potentially defective rear shock absorber assembly.

Service Bulletin

AIR BAGS

Service bulletin - Honda Motor Co., Ltd. is conducting a Safety Recall of certain 2014-2015 CBR1000S motorcycles. Honda has decided that a defect which relates to motor vehicle safety exists in affected units. During assembly of the rear shock, the piston nut may not have been correctly torqued.

MPB15222

EQUIPMENT

HONDA: THIS NEWSLETTER IS IN REGARDS TO HEATER KIT UPDATE. HEATER KIT WILL BE INSTALLED BY DEALER FOR CUSTOMERS. *LJ

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Honda CBR1000S by model year
YearComplaintsRecallsInvestigationsIssue Index
2016000—
2015010—
2014Viewing010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.