SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM
2006 Honda S2000
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 10 NHTSA owner-reported complaints for the 2006 Honda S2000, most frequently naming the airbags, body & structure and driver assistance categories. 2 safety recalls have been issued covering this model year; and 11 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
View as table
| Month | Complaints filed | Cumulative |
|---|---|---|
| Jun 2007 | 1 | 1 |
| Sep 2007 | 1 | 2 |
| Apr 2008 | 2 | 4 |
| Sep 2008 | 1 | 5 |
| Jul 2009 | 1 | 6 |
| May 2010 | 1 | 7 |
| Jun 2010 | 1 | 8 |
| Jul 2013 | 1 | 9 |
| May 2023 | 1 | 10 |
What owners report
Complaints grouped by the component NHTSA recorded
- Airbags327.3%
- Body & structure327.3%
- Driver assistance19.1%
- Engine19.1%
- Fuel system19.1%
- Other / unspecified19.1%
- Suspension19.1%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
2 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
airbag light on , no accident .will take to Honda dealer soon wondered if this is related to tatka airbag problems.
- NHTSA ID
- 11523414
- Incident
- May 22, 2023
A SLIT, ABOUT 1" LONG, APPEARED IN THE CONVERTIBLE TOP REAR QUARTERPANEL. YESTERDAY, I NOTICED ON THE OTHER SIDE OF THE CAR, IN THE EXACT SAME SPOT, AN INDENTATION, ABOUT TO BECOME ANOTHER SLIT. HONDA DEALER AND CUSTOMER COMPLAINT BOTH NOTIFIED. THEY HAVE NOTHING ON FILE ABOUT THIS ISSUE AND OFFERED NO SOLUTIONS. THERE OBVIOUSLY IS AN ISSUE WITH THE RETRACTION MECHANISM DESIGN OR FUNCTION. WEAR ON A RETRACTED CONVERTIBLE TOP , TO THE POINT OF PENETRATION, IS UNACCEPTABLE. *TR
- NHTSA ID
- 10525827
- Incident
- Oct 31, 2012
- Mileage
- 54,000 mi
THE CONVERTIBLE TOP ON MY HONDA S2000 HAS RIPPED FOR THE SECOND TIME. THE FIRST TIME THE TOP WAS REPLACED UNDER WARRANTY. UNDER INDEPENDENT EXAMINATION THE TOP WAS FOUND TO HAVE AN ENGINEERING DEFECT WHERE THE FABRIC TOP RUBS AGAINST A SHARP METAL COMPONENT OF THE TOP FRAME CAUSING A TEAR. *TR
- NHTSA ID
- 10340502
- Incident
- Jun 1, 2010
- Mileage
- 21,000 mi
MY 2006 HONDA S-2000 HAS HAD AN ONGOING ISSUE WITH HIGH COLD START IDLE THAT CAN EXCEED 2500 RPM MAKING THE VEHICLE DANGEROUS TO OPERATE UNTIL SUFFICIENT TIME HAS ELAPSED FOR THE ENGINE TO WARM UP. AFTER NUMEROUS COMPLAINTS TO HONDA OF NORTH AMERICA CUSTOMER SERVICE, HONDA ARRANGED FOR ME TO DROP THE VEHICLE OFF AT A LOCAL HONDA DEALER TO REPAIR THE ISSUE. AFTER THREE DAYS WITH THE VEHICLE IN THEIR POSSESSION, HONDA NOW STATES THAT; THE IDLE SPEED FOR THE VEHICLE IS NORMAL AND NO DEFECTS COULD BE FOUND IN THE CAR. THEY FURTHER STATE THAT THE VEHICLE IS ONLY SAFE TO OPERATE IF GIVEN SUFFICIENT TIME TO WARM UP. *TR
- NHTSA ID
- 10329325
- Incident
- May 7, 2010
- Mileage
- 35,000 mi
TL*THE CONTACT OWNS A 2006 HONDA S2000. THE CONTACT STATED THAT THE METAL LINK ON THE CONVERTIBLE TOP WAS PLACED DIRECTLY OVER HIS SKULL. IN THE EVENT OF A CRASH, HIS HEAD WOULD STRIKE THE METAL LINK AND CAUSE INJURIES. THE MANUFACTURER ADVISED THE CONTACT TO TAKE THE VEHICLE TO THE DEALER TO CHECK IF THE ISSUE WAS DUE TO A MANUFACTURER DEFECT. THE CONTACT FEELS THAT THIS IS A SAFETY HAZARD AND WANTS THE MANUFACTURER TO PROVIDE A HARD TOP. THE CURRENT AND FAILURE MILEAGES WERE 16,000. THE CONVERTIBLE TOP HAS A PROTRUDING METAL JOINT AND OTHER UNSHIELDED METAL PIECES. UPDATED 07/21/09.*JB
- NHTSA ID
- 10276521
- Incident
- Jul 12, 2009
- Mileage
- 16,000 mi
REAR SHOCK ABSORBER LEAK RESULTING IN COMPONENT FAILURE AND UNSAFE HANDLING AND BRAKING. *TR
- NHTSA ID
- 10240552
- Incident
- Aug 25, 2008
- Mileage
- 11,850 mi
TL*THE CONTACT OWNS A 2006 HONDA S2000. WHILE DRIVING APPROXIMATELY 20 MPH, THE CONTACT SWERVED TO AVOID A DEER AND CRASHED INTO A TREE. THE FRONT AIR BAGS FAILED TO DEPLOY. THE INSURANCE COMPANY STATED THAT THE VEHICLE MUST BE TRAVELING AT 35 MPH FOR THE FRONT AIR BAGS TO DEPLOY. THE CONTACT SUSTAINED INJURIES TO HIS NECK AND BACK. THE VEHICLE IS AT THE BODY SHOP FOR REPAIR. THE CURRENT AND FAILURE MILEAGES WERE 17,764.
- NHTSA ID
- 10225624
- Incident
- Apr 21, 2008
- Mileage
- 17,764 mi
DEER RAN OUT I SWERVED HIT A TREE HEAD ON. *TR
- NHTSA ID
- 10225598
- Incident
- Apr 21, 2008
- Mileage
- 18,000 mi
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
EQUIPMENT:APPLIANCE:AIR CONDITIONER
"Service Bulletin - There are several A/C leak detection tools available. -Refrigerant Gas Leak Detector -Ultrasonic Leak Detector -Leak Dye"
EQUIPMENT; POWER TRAIN
Tech line summary article - Is the MIL on with DTC P2271 (secondary HO2S [sensor 2] circuit signal stuck rich)? What's likely causing this is the PCM is misinterpreting the A/F sensor (sensor 1) signals, causing the PCM to think that sensor 2 is stuck rich. To fix this issue, replace both sensors.
ELECTRICAL SYSTEM:IGNITION
SERVICE BULLETIN - ALL OF THE LISTED VEHICLES HAVE A TYPE 4 IMMOBILIZER SYSTEM THAT DISABLES THE VEHICLE UNLESS A PROGRAMMED IGNITION KEY IS USED. THE TYPE 4 SYSTEM IS DIFFERENT THAN PREVIOUS SYSTEMS IN THAT THE TRANSPONDER ID CODE IN THE KEY IS A ROLLING-TYPE CODE INSTEAD OF A FIXED CODE. IN THIS SERVICE BULLETIN, A PROGRAMMED IGNITION KEY REFERS TO A TRANSPONDER-TYPE KEY THAT HAS BEEN CUT TO FIT THE IGNITION SWITCH AND WHOSE TRANSPONDER ID CODE IS RECOGNIZED BY THE IMMOBILIZER SYSTEM. IF YOU TRY TO START THE ENGINE WITHOUT A PROGRAMMED IGNITION KEY, THE ENGINE CRANKS, BUT IT DOES NOT START.
AIR BAGS
Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.
AIR BAGS
Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-040, Safety Recall: Accord, Civic, and Others ? Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-045, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-046, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to ISIS. However, due to the large number of affected units, American Honda is still in the process of populating the VIN status inquiry function on iN, which is expected to take several days. When this process is complete, American Honda will notify all dealers again via iN message. Until that time, the existing acknowledgement procedure must be used for all potentially affected vehicles.
ENGINE AND ENGINE COOLING:ENGINE; FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES
HONDA: TROUBLESHOOTING OF DIAGNOSTIC TROUBLE CODES (DTC) P1456 AND P1457. DEALERS ARE TO RUN EVAP FUNCTION TEST TO FIND IF THERE IS A LEAK SO THE VEHICLE CAN BE REPAIRED. *KB
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.