RoadVitals

1991 INFINITI M30

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
8
Latest Sep 29, 2004
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Nov 1, 1995
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
1

Overview

Our database contains 8 NHTSA owner-reported complaints for the 1991 INFINITI M30, most frequently naming the electrical, engine and body & structure categories. 2 safety recalls have been issued covering this model year; 1 NHTSA investigation names it; and 31 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Electrical450.0%
  • Engine225.0%
  • Body & structure112.5%
  • Transmission112.5%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
95I006000

FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM

Nov 1, 1995
686,649 units potentially affected
The defect: THIS IS NOT A SAFETY RECALL CAMPAIGN IN ACCORDANCE WITH FEDERAL REGULATION 573. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. THE CAMPAIGN WILL REPLACE THE FUEL INJECTORS AND RELATED HOSES OF AFFECTED VEHICLES WHICH COULD LEAK.
The risk: FUEL LEAKS IN THE ENGINE COULD RESULT IN A FIRE.
The remedy: NISSAN DEALERS WILL REPLACE THE FUEL INJECTORS AND RELATED HOSES ON THE AFFECTED VEHICLES.
NISSAN NORTH AMERICA, INC.View on NHTSA.gov
95V103002

SEAT BELTS:FRONT:BUCKLE ASSEMBLY

May 24, 1995
2,730,462 units potentially affected
The defect: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
The risk: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
The remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED FREE OF CHARGE.
NISSAN NORTH AMERICA, INC.View on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

EA95007ClosedEngineering Analysis

TAKATA SEAT BELT BUCKLE FAILURE

Opened Mar 10, 1995
Closed Aug 2, 1995

There is no summary currently available

SEAT BELTS:FRONT:BUCKLE ASSEMBLYLed to recall 95V103002

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Electrical
Filed Sep 29, 2004

ELECTRICAL PROBLEM. MR *TC

NHTSA ID
8020983
Incident
Aug 1, 2001
Electrical
Filed Oct 16, 2002

MR

NHTSA ID
8020985
Electrical
Filed Oct 16, 2002

MR

NHTSA ID
8020982
Electrical
Filed Oct 16, 2002
Fire reported

CONSUMER STATES WHILE SHE WAS AT THE POST OFFICE DEPOSTING A LETTER , SHE GOT OUT OF THE AUTOMOBILE AND WHEN SHE GOT BACK INTO THE AUTO SHE SMELLED SMOKED. AFTER THAT SHE BEGUN TO LOOK AROUND AND ACTUALLY SAW THE SMOKE, SHE STOPPED THE CAR. LATER SHE FOUND OUT THAT IS APPEARED TO BE ONE OF THE ELECTRICALLY BOXES IN THE TRUCK OF THE AUTO. NO INJURIES. MR

NHTSA ID
8020979
Incident
Aug 15, 2001
Engine
Filed Oct 8, 1998

EXHAUST MANIFOLD BOLTS BROKE, ALLOWING EXHAUST GAS TO LEAK.

NHTSA ID
780998
Incident
May 1, 1998
Engine
Filed Apr 14, 1998

ENGINE BURNED CAUSING FAILURE.

NHTSA ID
534088
Incident
Jan 18, 1998
Transmission
Filed Oct 25, 1997

TRANSMISSION WAS SLIPPING AND LURCHING. *AK

NHTSA ID
526286
Incident
Oct 23, 1997
Body & structure
Filed Jun 21, 1997

DOOR FRAME CRACKED.

NHTSA ID
519581
Incident
Apr 1, 1995

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

ITB09-039J

STRUCTURE; VISIBILITY

WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

ITB13-007H

STRUCTURE; VISIBILITY

REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

ITB10-067C

WHEELS

WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

ITB16-006A

ELECTRICAL SYSTEM

INFINITI; FRONT SONAR PARKING SENSOR SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

ITB19-008

EQUIPMENT

EXTERIOR CLEANING INFORMATION SERVICE INFORMATION When cleaning the exterior of an Infiniti vehicle, damage may occur when using a cleaner with too high of an alkaline concentration. - Always refer to the Appearance and care section of the related owner?s manual. - Not all cleaners are created equal. - Many cleaners come in concentrated form. - Alkaline cleaners (cleaners with a high pH value) can cause spots on paint and trim when not used as directed. - Some commercial car washes use cleaners with a high pH value. - When using cleaners that meet the conditions defined in the Appearance and care section, be sure to carefully follow the cleaner?s directions. - When finished cleaning/washing, rinse thoroughly with clean water. IMPORTANT: Damage to paint, glass, bright metal, or any other exterior surface caused by using improper cleaning products is not covered under warranty. Always refer to the Paint Incident Identification Manual (PIIM) and Assurance Products Reference Manual (APRM). Follow the guidelines in the PIIM and APRM for non-warrantable exterior body, glass, or painted surface quality issues. To access the PIIM and APRM, login to nnanet.com: - For the PIIM, select: MY LINKS > Warranty > Paint Incident Identification Manual - For the APRM, select: MY DOCUMENTS > Warranty > APRM See further information in this bulletin.

ITB18-037

EQUIPMENT; STRUCTURE

PLASTIC INTERIOR TRIM PROTECTIVE COVERING REMOVAL SERVICE INFORMATION Vehicles are delivered with plastic interior trim protective covering on the front and rear seats, front and rear door panel finishers, steering wheel, and sun visors (see examples on page 2). When removing the protective covering, care must be used to avoid scuffs, scrapes, cuts, and other abrasive contact to interior trim components. DO NOT use sharp objects like razor blades, box cutters, knives, etc. when removing the plastic interior trim protective covering. IMPORTANT: All soft trim described in this bulletin is on automatic return to NNA. Any trim found damaged in the way described in this bulletin will be charged back to the dealer.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

INFINITI M30 by model year
YearComplaintsRecallsInvestigationsIssue Index
1996000—
1995000—
1994000—
1993000—
1992510—
1991Viewing821—
1990921—
1989001—
1988001—
1987001—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.