RoadVitals

1999 International Harvester 9000

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
8
Latest May 21, 2003
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 1999 International Harvester 9000. 8 safety recalls have been issued covering this model year; 1 NHTSA investigation names it; and 2 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

8 campaigns cover this model year

View all 8

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
03V193000

SUSPENSION:FRONT:HUB

May 21, 2003
2,163 units potentially affected
The defect: ON CERTAIN HEAVY AND MEDIUM DUTY TRUCKS AND BUSES EQUIPPED WITH TRUCK HUB UNITS MANUFACTURED BY SKF EXCLUSIVELY FOR USE ON ARVINMERITOR'S FF98X SERIES NON-DRIVE STEER AXLES, THE HUB UNIT BEARINGS CAN WEAR PREMATURELY.
The risk: SEIZURE OF THE BEARINGS CAN CAUSE WHEEL SEPARATION OR WHEEL END FIRE.
The remedy: DEALERS WILL REPLACE ALL FRONT AXLE HUBS. OWNER NOTIFICATION BEGAN ON NOVEMBER 12, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 03510View on NHTSA.gov
03V137000

SERVICE BRAKES, AIR

Apr 3, 2003
2,818 units potentially affected
The defect: ON CERTAIN HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.
The risk: IF THE FITTING BREAKS, THE REAR SERVICE BRAKES WILL CEASE TO OPERATE WITHOUT WARNING, RESULTING IN AN EXTENDED STOPPING DISTANCE, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSTALL A KIT TO REMOUNT THE DOUBLE CHECK VALVE WITH A FLEXIBLE HOSE ON THE MAJORITY OF VEHICLES. ON A SMALL NUMBER OF UNITS WITH CLEARANCE ISSUES OR TRACTION CONTROL, A KIT WITH A NEW RELAY VALVE THAT HAS A BUILT-IN DOUBLE CHECK VALVE WILL BE INSTALLED. OWNER NOTIFICATION BEGAN ON APRIL 18, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 02506View on NHTSA.gov
02V135002

SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

May 20, 2002
108,560 units potentially affected
The defect: ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.
The risk: IF THE FITTING BREAKS, THE REAR SERVICE BRAKES WILL CEASE TO OPERATE WITHOUT WARNING, RESULTING IN AN EXTENDED STOPPING DISTANCE, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL INSTALL A KIT TO REMOUNT THE DOUBLE CHECK VALVE WITH A FLEXIBLE HOSE ON THE MAJORITY OF VEHICLES. ON A SMALL NUMBER OF UNITS WITH CLEARANCE ISSUES OR TRACTION CONTROL, A KIT WITH A NEW RELAY VALVE THAT HAS A BUILT-IN DOUBLE CHECK VALVE WILL BE INSTALLED. OWNER NOTIFICATION BEGAN SEPTEMBER 11, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 02506View on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

PE02092ClosedPreliminary Evaluation

INTEGRAL HUB AND BEARING ASSEMBLY

Opened Dec 3, 2002
Closed May 23, 2003

THE COMPANIES INVOLVED IN THIS MATTER ARE:SKF (HUB MFR), ARVINMERITOR (FRONT AXLE MFR), AND INTERNATIONAL,( MANUFACTURERS OF MEDIUM DUTY TRUCKS).SKF IDENTIFIED MANUFACTURING DEFECTS FOR SPECIFIC BUILD DATES ON FRONT AXLE HUB AND BEARINGS (WHEEL BEARINGS) SUPPLIED TO ARVIN MERITOR.AS A RESULT, ARVINMERITOR NOTIFIED INTERNATIONAL OF AXLES SUPPLIES WITH POSSIBLE DEFECTIVE FRONT HUB ASSEMBLIES.AS A RESULT OF THAT NOTIFICATION, 2041 TRUCKS ARE BEING RECALLED BY INTERNATIONAL FOR DEFECTIVE FRONT AXLE WHEEL BEARINGS WHICH MAY FAIL IN SUCH A WAY THAT A WHEEL SEPARATION OR WHEEL BEARING FIRE OCCURS.SEE ATTACHED SUMMARY REPORT FOR ADDITIONAL DETAILS.

SUSPENSION:FRONT:HUBLed to recall 03V193000

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

IK-0200006

STEERING: STEERING WHEEL/HANDLE BAR

INTERNATIONAL TRUCK: STEERING WHEEL SHACK LEFT TO RIGHT AT ROAD SPEED. CONFIRM THE LEFT SIDE HAS THE COMPOSTIE BEARING AND THE RIGHT SIDE HAS ATHE ROLLER BEARING. NO MODEL YEARS LISTED. *PE

G99903

POWER TRAIN:AXLE ASSEMBLY

REPLACEMENT OF FRONT AXLE BRAKE SPIDER/BACKING PLATES ON 9000 CONVENTIONAL MODELS WITH FRONT AXLE CODE 02AED OR 02AEG AND BRAKE CODE 04ERR, WITH BRAKE CODE 04174 OR 04175 OR 04JBG.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

International Harvester 9000 by model year
YearComplaintsRecallsInvestigationsIssue Index
2001031—
2000081—
1999Viewing081—
1998071—
1997001—
1996001—
1995210—
1994010—
1993010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.