RoadVitals

1995 International Harvester 9300 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Sep 25, 1995
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

EQUIPMENT:RECREATIONAL VEHICLE/TRAILER

Sep 25, 1995
1,843 units potentially affected
The defect: STRAPS HOLDING THE SLEEPER UPPER BUNK IN THE RAISED POSITION CAN RELEASE WITHOUT WARNING.
The risk: IF THE RESTRAINING STRAP RELEASES SUDDENLY, THE BUNKFALLS WITHOUT WARNING AND CAN STRIKE AN OCCUPANT SITTING IN THE LOWER BUNK CAUSING PERSONAL INJURY.
The remedy: DEALERS WILL MODIFY THE ATTACHMENT OF THE UPPER BUNK RESTRAINING STRAP TO THE UPPER BUNK AND REAR WALL OF THE SLEEPER AND INSTALL A NEW REDESIGNED BUNK RESTRAINING STRAP.
INTERNATIONAL TRUCK AND ENGINEView on NHTSA.gov
May 24, 1995
5,752 units potentially affected
The defect: THE SWIVEL SEAT ASSEMBLY ATTACHMENTS BETWEEN THE UPPER AND LOWER PORTIONS ARE INADEQUATE TO INSURE THAT THE ASSEMBLY WILL STAY TOGETHER DURING NORMAL USE. VIBRATION CAN CAUSE THE ATTACHING BOLTS TO WORK LOOSE AND FALL OUT.
The risk: SHOULD THE BOLTS FALL OUT, THE SEAT SWIVEL ASSEMBLY WOULD SEPARATE. IF THIS SHOULD HAPPEN WHILE THE VEHICLE IS IN MOTION, IT COULD CAUSE THE OPERATOR TO LOSE CONTROL OF THE VEHICLE INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.
The remedy: DEALERS WILL INSTALL A NEW RE-DESIGNED SWIVEL MOUNT/STOP RING, A SPACER AND NEW LONGER MOUNTING BOLTS.
INTERNATIONAL TRUCK AND ENGINEView on NHTSA.gov

STEERING:LINKAGES:TIE ROD ASSEMBLY

May 9, 1995
196 units potentially affected
The defect: DURING ASSEMBLY, THE TIE ROD END NUTS WERE NOT PROPERLY TORQUED. EXTREMELY LOW TORQUE CAN ALLOW MOVEMENT BEWEEN THE BALL STUD AND THE TIE ROD ARM CAUSING DAMAGE.
The risk: THIS CONDITION CAN AFFECT THE DRIVER'S ABILITY TOSTEER THE VEHICLE INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.
The remedy: DEALERS WILL CHECK THE TORQUE ON THE BALL STUDS OF THE SUSPECT AXLES AND BRING THE TORQUE UP TO ROCKWELL'S SPECIFICATIONS.
INTERNATIONAL TRUCK AND ENGINEView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources