RoadVitals

2004 International Ce Bus

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
1
Latest May 13, 2005
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest May 27, 2004
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 1 NHTSA owner-reported complaint for the 2004 International Ce Bus, most frequently naming the driver assistance category. 1 safety recall has been issued covering this model year; and 84 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Driver assistance1100.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
04V250000

STEERING:HYDRAULIC POWER ASSIST:PUMP

May 27, 2004
5,999 units potentially affected
The defect: ON CERTAIN SCHOOL AND TRANSIT BUSES THE STUDS USED TO SECURE THE POWER STEERING PUMP TO THE ENGINE BLOCK CAN FAIL, RESULTING IN ENGINE OIL LEAKAGE AND COMPLETE LOSS OF POWER STEERING. THE POWER STEERING PUMP IS DESIGNED TO PROVIDE POWER ASSIST TO BOTH THE STEERING SYSTEM AND THE HYDRAULIC BRAKING SYSTEM. SHOULD STUD FAILURE CAUSE THE PUMP TO BECOME DISENGAGED FROM ITS DRIVE GEARS, A REDUCTION OF THE FLUID FLOW RATE TO THE BRAKE SYSTEM COULD OCCUR AND POSSIBLY CAUSE AN EXTENDED STOPPING DISTANCE AS WELL AS INCREASED STEERING WHEEL EFFORTS.
The risk: SUDDEN LOSS OF POWER STEERING WILL IMPAIR THE VEHICLE OPERATOR, POSSIBLE RESULTING IN A VEHICLE CRASH.
The remedy: INTERNATIONAL WILL NOTIFY ITS CUSTOMERS AND ALL VEHICLES WILL BE INSPECTED AND ANY SUSPECT STUDS WILL BE REPLACED. OWNER NOTIFICATION BEGAN SEPTEMBER 24,2004. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INTERNATIONAL AT 1-800-448-7825.
INTERNATIONAL TRUCK & ENGINE CORPORATIONManufacturer number 04509View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Driver assistance
Filed May 13, 2005

DT: THE BUS HAD STOPPED AT THE RAILROAD TRACKS, WHICH HAD CHILDREN ON BUS. WHEN THE BUS STARTED TO GO, HE PULLED UP APPROXIMATELY TO LENGTH AND PROCEEDED TO IDLE AS IF ACCELERATOR WAS DISCONNECTED. THE BUS WAS AT THE DEALERSHIP FOR OVER TWO WEEKS. THEY CHANGED OVER PART OF WIRING AND SAID PROBLEM WAS CORRECTED. THE BUS WAS DRIVEN FOR ABOUT 50 MILES WITH NO PROBLEMS. AGAIN THIS OCCURRED AT AN INTERSECTION WITHOUT WARNING. THE ACCELERATOR ASSEMBLY WAS REPLACED. TO THIS DATE NO OTHER PROBLEMS. *JB

NHTSA ID
10120849
Incident
Nov 17, 2004
Mileage
3,000 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

IK4300035

ELECTRICAL SYSTEM

This tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files. It allows users to quickly load files either manually or directly from the Diamond Logic Builder Vehicles folder using VIN-based selection. As files are added or removed, the comparison runs automatically with no manual action required. The program presents results in an interactive table that shows feature codes, descriptions, access levels, and whether each feature is present in each selected file. Built-in search, filtering, and sorting make it easy to locate specific features or focus only on differences between files. Column visibility can be customized to show or hide descriptions and access information as needed. Users can remove files individually or clear all files at once, with results updating instantly. The tool also includes reporting and export options that reflect exactly what is visible on screen, allowing results to be printed, copied, saved as text, or exported to CSV for use in Excel or other spreadsheet tools. Overall, the program streamlines the process of comparing vehicle feature configurations, helping users quickly identify differences, validate setups, and document results without manual comparison or external tools.

IK2600047

ENGINE

Engine replacements for all International engines will need to follow this procedure.

IK1600272

STRUCTURE:BODY

This document will guide the user through a step-by-step procedure for detecting water leaks in vehicle cabs and windshields using an ultrasonic sound detector.

IK0600030

POWER TRAIN

This document will guide the user through understanding Prop Shaft Codes and understanding the variations of prop codes. (Metric Prop codes start with the number a 4 and Non metric Prop codes start with a 2.)

IK2200169

VISIBILITY/WIPER

This document will guide the user through repairing a Next Gen CE Bus Driver's Window with loose, displaced, or falling-out upper or lower seals. See symptoms below for an example of the issue.

IK1201009

STRUCTURE:BODY

In some geographic areas, ambient temperatures reaching below 15°F (-10 °C), including high levels of humidity, an operator may experience engine stalling, low performance, and or poor aftertreatment performance. This is caused by condensation accumulating and freezing within the Charge Air Cooler (CAC); affecting air flow into the engine. This article lists all the currently available winter front covers that can be installed on the front grille and bumper to reduce cold air flow to the engine compartment.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.