RoadVitals

2006 Isuzu 4500 Series

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
0
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2006 Isuzu 4500 Series. 1 NHTSA investigation names it; and 183 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

No recalls in our database for this model year

That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

PE10049ClosedPreliminary Evaluation

Engine Cooling Fan Fracture

Opened Dec 7, 2010
Closed Feb 17, 2012

Past recalls and complaint experience indicate that the disintegration of vehicular components (not necessarily limited to fan blade assemblies) rotating at or near engine speeds can pose a hazard to individuals in proximity to the affected vehicle.This risk has frequently prompted responsive corrective field actions.This investigation (PE10-049) has not identified any (a) fatalities; (b) injuries; and/or (c) ?close-call incidents which, if reported, might provide an indication of the nature and severity of injuries which may occur if a fan blade installed in subject GMT vehicles were to fracture.Although ODI remains concerned about the potential for injury, ODI is closing this investigation because (1) the absence of an identified root cause or causal factors; and (2) the modest and declining level of complaint activity associated with fan blade breakage which indicates that the potential risk of injury is also small and diminishing.The closing of this investigation does not constitute a finding by NHTSA that no safety related defect exists.The agency reserves the right to take further action if warranted by circumstances.Further details are provided in the attached Executive Summary and ODI Technical Report Summary for PE10-049.

ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

PIT3271N

TIRES; WHEELS

This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.

WB13-X-001B

EQUIPMENT

Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback. This bulletin was revised to add a Parts Warranty Form

WB13-X-001A

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback.

PIT3271M

TIRES; WHEELS

This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.

22NA009

ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:FILTER/SCREEN

This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.

030091001H

EQUIPMENT ADAPTIVE/MOBILITY:VEHICLE CONTROLS:STEERING

This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure, when diagnosing vibration concerns.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.