RoadVitals

2006 Isuzu F-Series

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Aug 28, 2007
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2006 Isuzu F-Series. 2 safety recalls have been issued covering this model year; and 37 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
07V385000

PARKING BRAKE

Aug 28, 2007
9,518 units potentially affected
The defect: ON CERTAIN STRAIGHT TOWING OR NON-TOWING TRUCKS EQUIPPED WITH BENDIX AIR BRAKES, THE AIR BRAKE PARK CONTROL VALVE MAY DEVELOP EITHER AN INTERNAL AIR LEAK OR AN AIR RESTRICTION. THE PARK BRAKE MAY NOT RELEASE OR MAY RELEASE ONLY PARTIALLY.
The risk: IF THE VEHICLE IS ON AN UNEVEN SURFACE, THE PARK BRAKE MAY NOT HOLD THE VEHICLE AND COULD RESULT IN UNINTENDED VEHICLE MOVEMENT AND A VEHICLE CRASH. THIS CONDITION DOES NOT AFFECT NORMAL SERVICE BRAKING.
The remedy: DEALERS WILL INSPECT AND REPLACE THE EXTERNAL CHECK VALVE ON THE AIR BRAKE PARK CONTROL VALVE IF THE INSPECTION DETERMINES THE EXTERNAL CHECK VALVE IS DAMAGED, THE AIR BRAKE PARK CONTROL VALVE WILL BE REPLACED AND MAY REQUIRE THE REPLACEMENT OF AN INTERNAL CHECK VALVE IN THE AIR BRAKE PARK CONTROL VALVE. REMEDY WILL BE FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 22, 2007. OWNERS MAY CONTACT GM AT 1-800-862-4389 OR ISUZU AT 1-800-255-6727.
GENERAL MOTORS CORP.Manufacturer number 070164View on NHTSA.gov
06V311000

SERVICE BRAKES, AIR

Aug 16, 2006
1,369 units potentially affected
The defect: CERTAIN TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." AN INTERNAL CONTROL AND CHECK VALVE WITHIN THE AIR BRAKE APPLICATION VALVE ASSEMBLY WAS CONFIGURED IMPROPERLY, PREVENTING AIR FROM FLOWING THROUGH THE BRAKE SYSTEM AS DESIGNED. IN THE EVENT OF AN EMERGENCY STOP, THE VEHICLE'S STOPPING DISTANCE WOULD BE INCREASED.
The risk: IF STOPPING DISTANCE WAS LIMITED, A VEHICLE CRASH COULD RESULT.
The remedy: DEALERS WILL REPLACE THE AIR BRAKE APPLICATION VALVE ASSEMBLY ON C-SERIES OR REROUTE THE AIR BRAKE LINES ON T-SERIES FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 20, 2006. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438, GMC AT 1-866-996-9463 AND ISUZU AT 1-800-255-6727.
GENERAL MOTORS CORP.Manufacturer number 06077View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

IB18-X-002F

ENGINE; POWER TRAIN

INFORMATION BULLETIN: THIS BULLETIN APPLIES TO ALL OEM AND REMANUFACTURED ENGINE AND TRANSMISSION ASSEMBLIES, FOR THE AFFECTED VEHICLES LISTED ABOVE, TO BE REPLACED UNDER THE ISUZU NEW VEHICLE WARRANTY, GOODWILL, ISUZU PARTS WARRANTY, GOLD STAR USED TRUCK WARRANTY AND/OR ALL EXTENDED POWERTRAIN WARRANTIES OFFERED BY ISUZU, AS WELL AS ALL OVER-THE-COUNTER ENGINE AND TRANSMISSION ASSEMBLY REPLACEMENTS.

WB11-X-001A

ENGINE AND ENGINE COOLING

The following information is provided to clearly explain Isuzu’s policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regularly updated for many reasons. These reasons may include, but are not limited to: model year change, software corrections, certification compliance, product improvement and specific application requirements. However, the mere existence of a newer control module calibration does not necessarily mean that warranty coverage exists or that the calibration must be installed. It is not our policy to update control modules, under warranty or after warranty, based solely on the availability of a newer calibration file. Below are our guidelines for reprogramming control modules.

IB13-R-001G

This bulletin outlines the procedures for using the Alpine Exchange Program (the "Exchange Program"). The Exchange Program must be used when any Alpine radio or other component covered by this bulletin is repaired under warranty and may also be used for radio and component repairs not covered under warranty. Contact Alpine directly for pricing and payment methods applicable to radio and component repairs not covered under warranty.

WB13-X-001B

EQUIPMENT

Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback. This bulletin was revised to add a Parts Warranty Form

WB13-X-001A

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback.

IB09-X-002B

EQUIPMENT

The following is a list of the Isuzu-recommended Threebond product part numbers identified in the various Isuzu Workshop Manuals and bulletins. If a Threebond product is unavailable, we recommend that you utilize the chart below to find equivalent of similar products (when available) from Loctite and Permatex.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Isuzu F-Series by model year
YearComplaintsRecallsInvestigationsIssue Index
2025000—
2024000—
2023000—
2022000—
2021000—
2020000—
2019000—
2018000—
2011000—
2010000—
2009010—
2008000—
2007030—
2006Viewing020—
2005000—
2004000—
2003000—
2002000—
2001000—
2000000—
1999000—
1998000—
1997000—
1996000—
1995000—
1994000—
1993100—
1992100—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.