RoadVitals

2012 Isuzu Reach Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Mar 21, 2017
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

17V191000

POWER TRAIN:AXLE HUBS

Mar 21, 2017
97,000 units potentially affected
The defect: Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2011-2016 NPR, 2011-2017 NPR-HD, NQR, NRR, 2015-2017 NPR-XD, 2012-2016 Reach, NPR Gas and NPR-HD Gas incomplete trucks. The left rear wheel bearing hub locking bolts may not have been properly tightened during assembly.
The risk: The loose bolts can allow the wheel assembly to move outward from the axle housing, affecting the control of the vehicle and reducing braking performance, thereby increasing a risk of a crash.
The remedy: Isuzu will notify owners, and dealers will inspect the left rear wheel bearing hub locking bolts, tightening them as necessary, free of charge. The recall began on April 19, 2017. Owners may contact Isuzu customer service at 1-866-441-9638.
Isuzu Technical Center of America, Inc.View on NHTSA.gov
14V735000

EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

Nov 18, 2014
3,564 units potentially affected
The defect: Isuzu Manufacturing Services of America (Isuzu) is recalling certain model year 2012-2014 Reach chassis manufactured July 26, 2011, to August 7, 2014. In the affected vehicles, the brake light switch may be bent while braking, possibly causing it to not activate the brake lights and potentially corrode.
The risk: If the brake light switch bends or corrodes, the brake light switch may become inoperative, increasing the risk of a crash.
The remedy: Isuzu will notify owners, and dealers will apply a protector and a waterproof cover with an extension harness so that the switch cannot be bent or corroded, free of charge. Parts are not currently available. Owners will be sent an interim notification and then will be sent a second notice when remedy parts are available. Isuzu issued an interim notification to owners on December 17, 2014. The manufacturer has not yet provided a notification schedule. Owners may contact Isuzu customer service at 1-866-441-9638.
Isuzu Manufacturing Services of AmericaView on NHTSA.gov
14V203000

ELECTRICAL SYSTEM:HORN

Apr 17, 2014
1,770 units potentially affected
The defect: Isuzu Manufacturing Services of America, Inc. (Isuzu) is recalling certain model year 2012-2013 Reach stripped chassis manufactured July 26, 2011, through August 27, 2013. The horn switch contacts may be bent or may wear prematurely causing the horn not to work.
The risk: An inoperable horn may increase the risk of a crash.
The remedy: Isuzu will notify owners, and dealers will inspect the horn contact shaft to see if it is bent or if it has premature wear, and replace the steering wheel combination switch if either condition is found, free of charge. Owners may contact Isuzu customer service at 1-866-441-9638. Isuzu's number for this recall is CB14-N-001.
Isuzu Manufacturing Services of AmericaManufacturer number CB14-N-001View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources