The jeep lost power while I was driving. The lights stayed on but jeep came to a stop. I touched the key area and it started running again.
- NHTSA ID
- 11708593
- Incident
- Jan 3, 2026
Owner-reported complaints naming the driver-assistance system, filed with NHTSA
Data refreshed
Reports naming forward-collision avoidance, lane keeping, back-over prevention, cruise control and related electronic driver-assistance systems. Every record below is an owner-reported complaint about the 2018 Jeep Wrangler submitted to NHTSA — not a confirmed defect, not a recall and not a manufacturer bulletin. 89 reports on file name it.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
The 25 most recent of 89, in the owner's own words
The jeep lost power while I was driving. The lights stayed on but jeep came to a stop. I touched the key area and it started running again.
Car Shakes like crazy ( death wobble) expecially on Highway from hitting a little bump or transition on road.
ABS module has failed and has shut off the cruse control system. The O.E. module is on national back order with no idea of it availability. The unit is still in the vehicle. Non-A.B.S. brakes work. How ever the traction control system is shut off as well as the cruse control system posing a greater risk to all. Search on several internet sites confirms that this issue has been noted to the manufacture with no resolution. Owners are left to find their own part and none are available.
1. Electrical System: Instrument Cluster/Panel. AN Instrument Panel That Fails TO Display Critical Safety Information, Such AS THE Speedometer or Warning Lights, CAN Increase THE Risk OF A Crash. My VIN said there is no recall for this and my vehicle has this problem. 2. Blind Spot Warning becomes disabled and errors out periodically even when there are no issues with sensors and sensors are cleaned. When error occurs, the Blind Spot Warning lights remain active even when there are no objects in the blind spot.
My vehicle started showing the airbag light on and it ended up being the clock spring, many jeep wranglers have being recalled because the same issue. The clock spring is the one that controls cruise, airbag, horn, traction, etc. i took it to the dealership and they said the vehicle was showing the B1B02 code, witch the the same why all the other jeeps were recalled but there is not a recall yet for my year. I want to people be aware of the importance of it, because in a crash the airbag will not deploy and even not in a crash the cruise control could malfunction anytime. I got my vehicle repaired today for a total of $1137.00 that wasn’t covered my extended warranty because they alleged the clock spring/airbag problem is reported very often. This is a really safety matter for all the jeep owners!!!
While driving at 55 mph the brake light, service abs system, check engine light, service 4wd, service transmission, loss of power steering, and engine cooling fan ran very fast. I was lucky to pull off the road and put the vehicle in Park. The 4 Way flashers would blink erratically. Engine still running wouldn't come out of Park. I turned the vehicle off.l let it set a few minutes. I then restarted the vehicle and it shifted into gear and drove home with the check engine light on. The next day it had no check engine light.
The sensors, in particular the blind spot warning, randomly light up and stay on until the vehicle is turned off. Radio and navigation system randomly shuts off, and check engine light goes on and off randomly. While driving at night, my entire dash flashed a red warning that there was no oil in the vehicle. I immediately pulled over at a gas station. It was dark, I couldn’t see, and it was 2am in a town I was unfamiliar with. I added 1 quart of oil ( I couldn’t really see the dipstick). The warning light went off, and the check engine light came on. I went 30 minutes to my destination and had the car towed to the dealership the next day. They said it was an o2 sensor, and that there was TOO MUCH oil in the vehicle so they drained it and did an oil change. I picked it up, drove less than 5 miles, and the check engine light came back on. I immediately returned to the dealership. They had it for several days before telling me that I had to replace the Catalytic Converters (2 of them) because I had overfilled the oil. They deemed it my fault. Since then the sensor problems continued, and the check engine light would randomly go on and off. Now it’s at the dealership again because it was leaking oil after an oil change. The dealership, and inspector from my extended warranty are saying that it has a blown engine because there was too little oil (in spite of NO SENSOR going off warning that the oil was low). Extended warranty inspector wants me to authorize a complete engine tear down for further inspection ($7000) and the dealership says I should just replace the engine ($11,000).
See attached document for complaint
I have been having electrical problems with my jeep for a couple of months. I took it in to my jeep dealer that found over fifty problem codes. They cleared the codes and drove it for 180 miles over two weeks and could not get anything to duplicate. Some codes- service shifter, abs not communicating, engine light, no speedometer, sway bar service, service 4 wheel drive, cruise control off, remote start off, and more. They had me take it home and let them know if it continues. It did so I took it to a different mechanic and he came up with 72 codes and he couldn’t track any of them to a source. So I picked it up today and on the way home on the interstate curved overpass going 65 it suddenly veered to the right at the retaining wall. The power steering quite. It was all I could do to keep it from hitting the wall. If it would of been my wife driving she would of wrecked. I was almost home and was able to muscle it home barley able to turn into the drive way. After a while I went back outside and started it and the power steering worked just fine.
Clutch - The Sansone Dealer located in Avenel, NJ has informed me that they did not have the part at the time and that I would receive a call. I never got a call so I decided to take the car back to them and now I'm being told they would need to hold onto the car for at least 48-hrs to diagnose the car. I don't understand why when they should be aware of the recall.
The clutch plate has failed on my 2018 Jeep Wrangler. I brought it into the dealer to take a look at it when I was experiencing the clutch slipping while shifting into first gear and also the "Service Auto Start Stop" indicator illuminating. Once the indicator illuminated, it also prevented by cruise control from working. After the dealer conducted troubleshooting of the issue, they told me that it was due to a safety recall on the clutch plate but that parts were unavailable. This appointment took place on August 4th, 2023. I was told that this issue could lead to a fire, so I have not been driving the vehicle since then. As of October 31st 2023, they still do not have the necessary parts to fix the issue. In the meantime, I've had to arrange for alternate transportation which cost me ~$3,700.
The power steering with no warning, just quits, working, get warning signs that the ABS is not working, included with the traction control.
Vehicle starts throwing codes and power steering quits working...
Recurring issue with my Jeep where seemingly every light on the dash, as well as the blind spot detectors, illuminates. The lights are accompanies by warning messages that indicate that electronic stability control and parking sense are unavailable. ABS lights, Traction Control, stability control, the brake light, and prompts to service 4WD are present. The impact varies based on whether or not the car is in motion. When it is not, as in the case of a cold start, the transmission is locked in Park. When the car is in motion, power steering intermittently goes out. If you pull over and put the vehicle in park while the lights are illuminated (i.e. if they don't clear), the car will get stuck in park until the lights clear. I have had the vehicle towed to the Jeep dealership in Natick, MA twice and, while they've charged me nothing, they've been unable to help due to the issue clearing and a lack of persistent diagnostic logs. Aside from the inconvenience, the sudden loss of power steering presents a safety issue. This has been going on for months, though the safety concern with steering only presented yesterday.
While driving vehicle will randomly have multiple warning lights on display suddenly appear (ABS, check engine, stability control, traction control, etc.) and speedometer would either go to 0 or read blank. In some instances power steering also cut out causing vehicle to swerve or jerk without warning. Spouse was scared to drive it when this happened and pulled over to have it towed. Did not want to have the vehicle suddenly swerve or lose control and hit cross traffic or pedestrian on side walk. This issue would then suddenly resolve itself and return to normal state. On some occasions, when vehicle was started, it would not shift out of park at first, but then would correct itself and allow it to be shifted out of park and driven. When check engine light was active, had codes checked and none were active, only stored. Indicated ABS sensor or ABS module errors. Was able to have Chrysler Dealer check into and after 5 days of troubleshooting, they worked with Chrysler Engineering to determine that there was a star CAN connector that was malfunctioning. Installed part 68321746AA for $84 and labor of $527 to resolve issue.
Driving along at highway speed. lost power steering. All lights lit on dash. center LCD screen was giving warnings that all systems had failed. Anti lock brakes, gear selector, can bus systems, audio and GPS systems. Fortunately i was driving on a straight highway. I've looked into this issue. Its called the Christmas tree event. As all problem lights on dash light up. It looks like the fix is replacing 2 CANBUS ports behind glove box.
Electrical going haywire. While in drive it just wouldn’t do anything the gear shift “D” was blinking so I rolled to a safe place (thank god I was not on the freeway) turned it off then back on again apparently this is now a known problem not only for 2018 some were 2019 & 2020…… please investigate
The jeep had a p2138 code which is pedal sensor bad and p2127 took to black dodge jeep they found it bad replaced with OEM part 800 mi later p2138 code is back on and takes off on it's own
2018 Jeep Wrangler (JL) Sahara Safety features all disable with this issue: Power steering (this could happen on the highway) Stability (STC), Antilock Braking, Blind spot, etc. While driving their appears to be an electrical short. The steering wheel locks up and all lights on dashboard come on. Several error messages "Auto Park Disabled", "Speed Control Messaging Unavailable", "Service Antilock Brake System", "Service Transmission Continue in DRIVE. Do Not Shift or Turn Off Engine" - to name a few. Dealers turn me way with simple computer reboot solutions only for issue to reoccur. Issue presents itself intermittently. Dealer has regularly turned me away for being unable to replicate in non driving conditions.
All lights on dash light up while driving or in park, no power steering, all displays flickering, can not move vehicle. While in park, can not engage shifter, if I turn off vehicle while it’s on the “fritz”, vehicle might not start for some time (15-40 minutes), this has been on going since 11/22, three visits to dealership, two at an independent shop. Dealership claimed the couldn’t replicate issue/“concern” Vehicle is simply not safe. I’ve recorded many videos documenting these safety/vehicle issues. It’s been nearly 6 months of trying to get a reputable diagnosis, repair and answers. I hope this isn’t a scam? I truly need help.
Power steering and digital speedometer cut out without notice. Seems to be an electrical issue as it will throw a handful of lights at once and sometimes read "no bus". Has happened numerous times. Dealership replaced the aux battery. Did not resolve. Private dealerships are afraid to even touch it. Dealership I purchased it from "can't look at it until March" (5 months from now). There are reports of this all over forums and YouTube. Reached out to Chrysler directly and they basically just said "sorry your warranty is up".
Jeep JL shows various warnings about engine revs and sometimes loss of power steering while driving at all speeds. Sometimes the Jeep will not get out of park and this issue is intermittent. Have taken it to the dealership and they cannot find anything wrong. From reading forums it would appear there is a bad wiring harness that causes this but it is terrifying when it can happen randomly and then just goes away on its own like nothing happened. I have various videos of this happening while parked. This issue seems to affect many of the JLs and rubicons. It has been happening for about 3 weeks now. Jeep does not admit or see the issue and the error codes thrown would indicate literally everything is wrong with the jeep. Can provide videos of this parked but it can and does happen randomly while driving.
The power steering went out while driving, check engine light came on, ABS Service, Service Shifter, Start/Stop unavailable, Service 4wd, Auto Park Disabled, Blind Spot Alert, Electronic Stability Control Service, Parking Sense Off. I could not shift out of Park. Many people are having this problem with their 2018 Wrangler JL and JLU and later models. All you have to do is Google this or go to YouTube to see. It may be a faulty ECU. In any case, this is a problem and a safety hazard.
While driving at low speed in heavy rain vehicle lost power steering, engine service light, anti lock brake failure, skid control. Had to remove vehicle from roadway and restart engine, which corrected steering failure. Engine service light remained on. Vehicle is garaged. After being in garage for 24hrs engine service went out. Contacted dealer and was given appointment. Recommended not drive vehicle until service. Vehicle has 18,000 miles on it. Was told by dealer that battery failed which is tired into the crawl feature of the of the Rubicon 2.0 liter engine with crawl electric motor. Also told that there were many service bulletins.
In the middle of the intersection, the power steering turned off and the steering wheel locked. I could not move the steering. All dashboard lights came on as well as the emergency brakes. The gear shift also locked and refused to shift into any toner gear. The vehicle was completely disabled and would not restart. This is the 5 time this has happened. I took it to get serviced at my local jeep Chrysler dodge dealership and I am still receiving the same issue.
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers.
Categories with enough reports to have a page of their own
Data on this page last refreshed .