RoadVitals

2018 Kawasaki ZX1002A

Recalls, owner-reported complaints, investigations and safety data

NHTSA has issued a “do not drive” advisory affecting this model year.

Campaign 20V676000. Confirm whether your specific vehicle is covered using its VIN before acting on this.

Check your VIN on NHTSA.gov
Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Latest Dec 9, 2022
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2018 Kawasaki ZX1002A. 3 safety recalls have been issued covering this model year.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

3 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
22V912000

ENGINE AND ENGINE COOLING:ENGINE

Dec 9, 2022
3,172 units potentially affected
The defect: Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2015-2018 ZX1000, 2018 ZX1002A, ZX1002B, 2019-2021 ZX1002D, 2019-2022 ZX1002J, 2020-2023 ZR1000K, 2021-2022 ZR1000L, 2022 ZX1002R, and 2023 ZR1002L (Ninja H2, Ninja H2 Carbon, Ninja H2 SX, Ninja H2 SX SE, Ninja H2 SX SE+, Z H2, and Z H2 SE) motorcycles. Please see the attached model information chart for a detailed list of model codes, names and years. The plunger in the camshaft chain tensioner may lock, which can result in an engine stall while riding.
The risk: An engine stall while riding can increase the risk of a crash or injury.
The remedy: Dealers will replace the camshaft chain tensioner, free of charge. Owner notification letters were mailed December 21, 2022. Owners may contact KMC customer service at 1-866-802-9381.
Kawasaki Motors Corp., U.S.A.View on NHTSA.gov
21V594000

SUSPENSION:REAR:MOTORCYCLE FORK/SWINGARM:BEARINGS

Jul 30, 2021
857 units potentially affected
The defect: Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018 Ninja H2 SX, Ninja H2 SX SE, and 2019-2021 Ninja H2 SX SE+ motorcycles. An insufficient amount of grease in the rear hub needle-bearing may cause it to fail, which could result in the rear wheel locking up.
The risk: Rear wheel lock-up can increase the risk of a crash.
The remedy: Dealers will replace the needle-bearing, free of charge. Owner notification letters were mailed August 23, 2021. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC21-04.
Kawasaki Motors Corp., U.S.A.Manufacturer number MC21-04View on NHTSA.gov
20V676000NHTSA advisory: do not drive

ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:MANUAL TRANSMISSION

Nov 2, 2020
799 units potentially affected
The defect: Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018-2020 Ninja H2 SX, Ninja H2 SXSE, and 2019-2020 Ninja H2 SXSE+ motorcycles. In the event of a gear misengagement the engine electronic control unit (ECU) programming doesn't have the capability to suppress high RPM during transmission. If the transmission gears are not properly engaged while shifting into 4th or 5th gear, high engine RPM can cause the output gears of 4th or 5th to fracture when the gears re-engage.
The risk: Damaged gears and the inability to shift can cause the engine to lock up, increasing the risk of a crash.
The remedy: KMC will notify owners, and dealers will reprogram the FI-ECU software, free of charge. Owners are advised to not ride their motorcycle until the repair has been completed. The recall began November 16, 2020. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC20-10.
Kawasaki Motors Corp., U.S.A.Manufacturer number MC20-10View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Compare model years

Complaint and recall counts across every year of this model

Kawasaki ZX1002A by model year
YearComplaintsRecallsInvestigationsIssue Index
2020010—
2019010—
2018Viewing030—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.