2001 Lexus ES300

TL* THE CONTACT OWNS A 2001 LEXUS ES300. WHILE DRIVING 8 MPH, THE CONTACT NOTICED A BUMP VIBRATION COMING FROM THE REAR OF THE VEHICLE. THE CONTACT ALSO NOTICED THAT THE VEHICLE WOULD UNEXPECTEDLY SHIFT INTO REVERSE. THE VEHICLE WAS TAKEN TO THE DEALER, WHERE THE CONTACT WAS INFORMED THAT METAL FILLINGS WERE FOUND INSIDE OF THE TRANSMISSION. THE VEHICLE WAS THEN TAKEN TO A LOCAL MECHANIC, WHERE THE TRANSMISSION WAS REPLACED. THE FAILURE AND CURRENT MILEAGES WERE 110,000.

NHTSA ID

10456444

Incident

Jan 16, 2012

Mileage

110,000 mi

WAS IN AN ACCIDENT AND THE AIR BAG DID NOT DEPLOY. THEREFORE I WAS THROWN INTO THE STEERING WHEEL AND SUSTAINED AN INJURY TO MY HEAD AND EYE. I WAS TRAVELING 45 MPH BEFORE BREAKING AND CONTACT. *TR

NHTSA ID

10390319

Incident

Mar 9, 2011

Mileage

195,000 mi

2001 LEXUS ES 300. ACCELERATION ISSUES *GR THE CONSUMER STATED WHEN HIS WIFE STARTED THE VEHICLE, IT IMMEDIATELY WENT TO FULL RPM, PROBABLY AROUND 6,000 PLUS. HER FEET WERE FLAT ON THE FLOOR. SHE HAD NOT PUT THE GEAR IN REVERSE TO BACK OUT OF THE GARAGE, NOR HAD SHE TOUCHED THE BRAKE OR THE ACCELERATOR, WHEN THE RPMS BEGAN ACTING ERRATICALLY. THE CONSUMER STATED ONLY A COMPUTER FAILURE COULD HAVE CAUSED THE RPM TO INSTANTLY INCREASE IN THAT MANNER. THE CONSUMER STATED HE WENT TO THE GARAGE TO SEE WHAT WAS GOING ON AND WAS ABLE TO TURN THE VEHICLE OFF. THE CONSUMER RE-STARTED THE VEHICLE AND IT BEHAVED IN A NORMAL MANNER.

NHTSA ID

10327463

Incident

Feb 15, 2010

TL* THE CONTACT OWNS A 2001 LEXUS ES 300. THE CONTACT STATED WHILE DRIVING AT 45 MPH SHE APPLIED THE BRAKES, BUT THE VEHICLE CONTINUED TO ACCELERATE. THE CONTACT APPLIED BOTH FEET TO THE BRAKE PEDAL AND THE VEHICLE STILL WOULD NOT SLOW DOWN. THE VEHICLE CRASHED INTO A JERSEY WALL CAUSING DAMAGE TO THE REAR DRIVER SIDE OF THE VEHICLE. THE CONTACT DID NOT SUFFER ANY INJURIES DURING THE CRASH. THE CONTACT FEELS THE ACCELERATOR PEDAL STUCK AND CAUSED THE VEHICLE TO ACCELERATE AND NOT STOP AND EVENTUALLY CRASHED. THE CONTACT HAS NOT CALLED THE MANUFACTURER AT THIS TIME. FAILURE MILEAGE WAS 41,014 UPDATED 08/19/10*BF UPDATED 08/24/10

NHTSA ID

10310740

Incident

Feb 3, 2007

Mileage

41,014 mi

I HAVE A 2001 LEXUS 300. I HAVE NEVER EVER HAD ISSUES WITH IT-EXCEPT FOR 12-18 MONTHS AGO- MY MAT GOT STUCK. AS I DROVE IT KEEP AT HIGH SPEED AND KEPT GOING FASTER- THE BRAKE PEDAL WOULD NOT MOVE AS I PUSHED DOWN. I PIT MY HEAD DOWN AND PULLED AT THE MATT & UNHOOKED THE FRONT HOOK UNDER THE SEAT . I THANK GOD I WAS ABLE TO REMOVE MY MAT- AS OF THAT DAY-I REMOVED MY MAT & HAVE RUINED MY CARPET, BUT THAT IS FINE. I AM SURPRISED THIS RECALL IS NOT FOR MY MAKE & MODEL- WHEN I HEARD THE ISSUES WITH THE PEDAL...IT BROUGHT BACK THAT DAY- IF I WAS UNABLE TO FREE THE PEDAL, I DO NOT KNOW WHAT WOULD HAVE HAPPENED- I WOULD NEVER HAD THOUGHT TO HIT THE E BRAKE OR SHUT CAR DOWN- AND I PUT ALL MY POWER ON THE BRAKE & IT WOULD NOT WORK. ALL IN ALL IT IS AN EXCELLENT CAR! *TR

NHTSA ID

10306712

Incident

Jul 11, 2008

Mileage

70,000 mi

TRANSMISSION SKIPPING AT 92,00 MILES AND FAILED, MADE REPAIR $560. NOW AT 104,000 TRANSMISSION HAS TOTALLY FAILED. *TR

NHTSA ID

10261275

Incident

Mar 6, 2009

Mileage

92,000 mi

TL*THE CONTACT OWNS A 2001 LEXUS ES300. WHILE DRIVING 55 MPH, THE CONTACT'S DAUGHTER WAS INVOLVED IN A THREE VEHICLE CRASH. THE FIRST VEHICLE SLAMMED ON ITS BRAKES AND CAUSED THE SECOND VEHICLE TO STRIKE THE BUMPER OF THE FIRST VEHICLE. THE CONTACT'S DAUGHTER THEN CRASHED INTO THE REAR OF THE SECOND VEHICLE. THE AIR BAGS FAILED TO DEPLOY IN THE THIRD VEHICLE AND NO WARNING LIGHTS ILLUMINATED. THE VEHICLE WAS TOWED TO THE INSURANCE COMPANY'S SERVICE CENTER FOR REPAIR. THE MANUFACTURER WAS NOTIFIED AFTER THE REPAIR WAS MADE AND THEY STATED THAT NOTHING COULD BE DONE BECAUSE THE VEHICLE HAD BEEN REPAIRED. A POLICE REPORT WAS FILED. THE CONTACT'S DAUGHTER WAS INJURED. THE FAILURE MILEAGE WAS 99,000 AND THE CURRENT MILEAGE WAS UNAVAILABLE.

NHTSA ID

10224076

Incident

Mar 13, 2008

Mileage

99,000 mi

ON 2 RECENT OCCASIONS (NOV 13, 2006 AND MAY 5, 2007) MY WIFE WAS PULLING INTO A PARKING SPACE AND SHIFTING THE CAR INTO PARK WHEN THE CAR ACCELERATED RAPIDLY AND SLAMMED INTO A WALL. BOTH INCIDENTS WERE ALMOST IDENTICAL. EXTENSIVE DAMAGE WAS DONE TO THE FRONT SHEET METAL (ABOUT $9,000 ON EACH INCIDENT). IT'S POSSIBLE THAT MY WIFE STEPPED ON THE ACCELERATOR WHEN SHE THOUGHT SHE WAS STEPPING ON THE BRAKE BUT SHE SWEARS THAT THIS DID NOT HAPPEN. ALSO, IT IS UNLIKELY THAT THIS HAVE HAPPENED TWICE. *TR

NHTSA ID

10193988

Incident

May 5, 2007

Mileage

82,000 mi

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.