RoadVitals

2015 Mack Chu

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Latest Nov 18, 2014
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2015 Mack Chu. 4 safety recalls have been issued covering this model year; 1 NHTSA investigation names it; and 265 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

4 campaigns cover this model year

View all 4

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
14V737000

STEERING:LINKAGES:TIE ROD ASSEMBLY

Nov 18, 2014
1,048 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2015 CHU and CXU trucks manufactured from March 31, 2014, through June 26, 2014. In the affected vehicles, the collars that prevent the ball sockets from backing out of the tie rod may have been incorrectly positioned. This may allow the ball sockets to come loose.
The risk: If the ball sockets come loose from the tie rod, a complete loss of steering may result, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will inspect and re-position the collar if necessary, free of charge. The recall began on January 20, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0385.
Mack Trucks, Inc.Manufacturer number SC0385View on NHTSA.gov
14V553000

SEAT BELTS

Sep 11, 2014
381 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain 2015 CHU, CXU, and GU trucks manufactured June 4, 2014, through June 18, 2014. In the affected vehicles, the bolts that attach the seat belt to the seat frame may not have been torqued to the required specification. This could cause the bolts to loosen over time, allowing the seat belt to detach.
The risk: If the seat belt detaches from its mounts, the seat belt would fail to properly restrain to the seat occupant, increasing the risk of injury in the the event of a crash.
The remedy: Mack will notify owners, and dealers will tighten the bolts to the required specification, free of charge. The recall began in October 2014. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0383.
Mack Trucks, Inc.Manufacturer number SC0383View on NHTSA.gov
14V545000

FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL

Sep 9, 2014
538 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2013-2015 CXU and 2014-2015 CHU trucks manufactured August 23, 2012, through June 27, 2014, and equipped with adaptive cruise control. Due to a software error, the affected vehicles may not provide visual or audible alerts to the driver warning them that an obstruction in the road was detected.
The risk: If the driver is not warned of something being in the truck's path, there is an increased risk of a crash.
The remedy: Mack will notify owners, and dealers will reprogram the vehicle control unit, free of charge. The recall began on September 30, 2014. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0381.
Mack Trucks, Inc.Manufacturer number SC0381View on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

PE20005ClosedPreliminary Evaluation

mDrive Transmission Failure to Disengage

Opened Apr 28, 2020
Closed Apr 4, 2022

On April 28, 2020, the Office of Defects Investigation (ODI) opened PE20-005 to investigate reports of 2013-2015 Mack CHU and CXU trucks equipped with mDrive transmissions continuing to push forward when stopping, possibly increasing the risk of a crash. After more field reports were discovered, the scope of the investigation was expanded to cover MY 2013-2016 vehicles. The mDrive transmission is Mack's version of Volvo's I-Shift transmission, an automated manual transmission that allows gear shifting without the use of a clutch pedal. Early I-Shift transmissions were recalled (13V-268) to address a missing redundant clutch disengagement switch that could prevent the clutch from automatically disengaging when the brake was applied. If a loss of signal from the brake air pressure switch occurred, the clutch would remain engaged while braking.Although Mack's mDrive transmission adopted the latest Volvo I-Shift design and was built with the redundant clutch switch, ODI received field reports alleging that the mDrive transmission would not disengage when coming to a stop like the Volvo I-Shift transmissions in recall 13V-268.After more than a year of information requests, data exchanges and grouping, and analyzing data, ODI was able to correlate two versions of transmission software (ID 23084009 and ID 23084004), with two frequently replaced parts ('solenoid valve' and 'cylinder assy clutch') as outliers. However, Mack dismissed the replacement parts as being normal service parts for worn clutch systems.According to Mack, unlike the I-Shift recall, loss of one or more of the switches would not keep the clutch engaged but might cause a delay in the clutch disengaging, possibly due to the software/control system settings, the worn parts and system reaction time.To demonstrate the possible switch failure outcomes, Mack outfitted a subject model truck with a panel that could disable each switch on command. During test drives at the Mack facility, the demonstrator truck stopped when the brake was applied each time, and the truck did not stall when the brake was applied, even when the clutch was engaged. Even though failure of one of the switches could delay clutch disengagement, the stopping distance would still be shorter than one of the recalled Volvo I-Shift transmission trucks. With this information, as well as a lack of known crash incidents related to this complaint, ODI concludes that the Mack vehicles do not present an unreasonable risk to motor vehicle safety. Although ODI is closing this PE, Mack/Volvo should continue improving the transmission control unit software to further refine the clutch disengagement strategy. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. Claims are still being submitted and the Agency will continue to monitor the issue and reserves the right to take further action if warranted by new circumstances.

POWER TRAIN:MANUAL TRANSMISSION

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

CBR 2573-1 202604

POWER TRAIN

CBR - Mack Chassis - Through Shaft Bearing Retainer Breakage On Mack Carriers.

CBR 2362-3 202604

POWER TRAIN

CBR - Mack Carrier Nut Adhesive Change.

CBR 2246-5 032026

SUSPENSION

CBR - Z Spring Bracket Wear.

CBR 820-9 202601

ENGINE; VEHICLE SPEED CONTROL

CBR - Mack Chassis - Engine Brake Only Works With The Brake Pedal, No Function During Cruise. US07 And Newer Emissions, Model Year 2008 And Newer.

CBR 2171-11 202511

ELECTRICAL SYSTEM; ENGINE

CBR - Mack Temperature Sensor Troubleshooting Guide

CBR 2488 072025

ELECTRICAL SYSTEM

CBR - A significant GPS reporting issue is affecting fleet operations, with trucks maintaining back-office communication but failing to transmit GPS location data.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Mack Chu by model year
YearComplaintsRecallsInvestigationsIssue Index
2018000—
2017000—
2016001—
2015Viewing041—
2014051—
2013041—
2012000—
2011000—
2010050—
2009030—
2008081—
2007030—
2006000—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.