RoadVitals

2015 Mack Chu Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Nov 18, 2014
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

14V737000

STEERING:LINKAGES:TIE ROD ASSEMBLY

Nov 18, 2014
1,048 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2015 CHU and CXU trucks manufactured from March 31, 2014, through June 26, 2014. In the affected vehicles, the collars that prevent the ball sockets from backing out of the tie rod may have been incorrectly positioned. This may allow the ball sockets to come loose.
The risk: If the ball sockets come loose from the tie rod, a complete loss of steering may result, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will inspect and re-position the collar if necessary, free of charge. The recall began on January 20, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0385.
Mack Trucks, Inc.Manufacturer number SC0385View on NHTSA.gov
14V553000

SEAT BELTS

Sep 11, 2014
381 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain 2015 CHU, CXU, and GU trucks manufactured June 4, 2014, through June 18, 2014. In the affected vehicles, the bolts that attach the seat belt to the seat frame may not have been torqued to the required specification. This could cause the bolts to loosen over time, allowing the seat belt to detach.
The risk: If the seat belt detaches from its mounts, the seat belt would fail to properly restrain to the seat occupant, increasing the risk of injury in the the event of a crash.
The remedy: Mack will notify owners, and dealers will tighten the bolts to the required specification, free of charge. The recall began in October 2014. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0383.
Mack Trucks, Inc.Manufacturer number SC0383View on NHTSA.gov
14V545000

FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL

Sep 9, 2014
538 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2013-2015 CXU and 2014-2015 CHU trucks manufactured August 23, 2012, through June 27, 2014, and equipped with adaptive cruise control. Due to a software error, the affected vehicles may not provide visual or audible alerts to the driver warning them that an obstruction in the road was detected.
The risk: If the driver is not warned of something being in the truck's path, there is an increased risk of a crash.
The remedy: Mack will notify owners, and dealers will reprogram the vehicle control unit, free of charge. The recall began on September 30, 2014. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0381.
Mack Trucks, Inc.Manufacturer number SC0381View on NHTSA.gov
14V078000

ELECTRICAL SYSTEM

Feb 21, 2014
70,208 units potentially affected
The defect: Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM.
The risk: Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.
The remedy: Mack has notified owners, and dealers will inspect the EPDM. If contamination has occurred, dealers will replace the EPDM and address the leak, free of charge. Owners of model year 2010-2012 CHU, CXU, GU and TD vehicles were initially notified April 24, 2014. Owners affected by the recall expansions were notified in February 2015. Owners may contact Mack Trucks at 1-336-393-2000. Mack's number for this recall is SC0375.
Mack Trucks, Inc.Manufacturer number SC0375View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE20005ClosedPreliminary Evaluation

mDrive Transmission Failure to Disengage

Opened Apr 28, 2020
Closed Apr 4, 2022

On April 28, 2020, the Office of Defects Investigation (ODI) opened PE20-005 to investigate reports of 2013-2015 Mack CHU and CXU trucks equipped with mDrive transmissions continuing to push forward when stopping, possibly increasing the risk of a crash. After more field reports were discovered, the scope of the investigation was expanded to cover MY 2013-2016 vehicles. The mDrive transmission is Mack's version of Volvo's I-Shift transmission, an automated manual transmission that allows gear shifting without the use of a clutch pedal. Early I-Shift transmissions were recalled (13V-268) to address a missing redundant clutch disengagement switch that could prevent the clutch from automatically disengaging when the brake was applied. If a loss of signal from the brake air pressure switch occurred, the clutch would remain engaged while braking.Although Mack's mDrive transmission adopted the latest Volvo I-Shift design and was built with the redundant clutch switch, ODI received field reports alleging that the mDrive transmission would not disengage when coming to a stop like the Volvo I-Shift transmissions in recall 13V-268.After more than a year of information requests, data exchanges and grouping, and analyzing data, ODI was able to correlate two versions of transmission software (ID 23084009 and ID 23084004), with two frequently replaced parts ('solenoid valve' and 'cylinder assy clutch') as outliers. However, Mack dismissed the replacement parts as being normal service parts for worn clutch systems.According to Mack, unlike the I-Shift recall, loss of one or more of the switches would not keep the clutch engaged but might cause a delay in the clutch disengaging, possibly due to the software/control system settings, the worn parts and system reaction time.To demonstrate the possible switch failure outcomes, Mack outfitted a subject model truck with a panel that could disable each switch on command. During test drives at the Mack facility, the demonstrator truck stopped when the brake was applied each time, and the truck did not stall when the brake was applied, even when the clutch was engaged. Even though failure of one of the switches could delay clutch disengagement, the stopping distance would still be shorter than one of the recalled Volvo I-Shift transmission trucks. With this information, as well as a lack of known crash incidents related to this complaint, ODI concludes that the Mack vehicles do not present an unreasonable risk to motor vehicle safety. Although ODI is closing this PE, Mack/Volvo should continue improving the transmission control unit software to further refine the clutch disengagement strategy. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. Claims are still being submitted and the Agency will continue to monitor the issue and reserves the right to take further action if warranted by new circumstances.

POWER TRAIN:MANUAL TRANSMISSION

Elsewhere on this vehicle

Data sources