RoadVitals

2013 Mack Pinnacle (cxu) Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
13
Newest Dec 23, 2016
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

13 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

16V929000

SUSPENSION:FRONT:HUB

Dec 23, 2016
200 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2012, 2014-2015 and 2017 Granite (GU), 2012-2017 Pinnacle (CHU, CXU), and 2013-2015 and 2017 Titan (TD) trucks manufactured January 7, 2011, to September 29, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.
The risk: Overloaded front wheel hubs can result in premature failure of the hubs, bearings, and the related components, which can cause the front hub assembly to separate from the front axle. Because of this, the driver may lose control of the vehicle or parts may be dropped on the road, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will replace the hub assemblies, free of charge. The recall began on February 16, 2017. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0406.
Mack Trucks, Inc.Manufacturer number SC0406View on NHTSA.gov
16V456000

STEERING; SUSPENSION:FRONT

Jun 22, 2016
64 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2013 Pinnacle (CXU) trucks manufactured April 16, 2012, to May 4, 2012. These vehicles are equipped with certain Meritor FF967 non-drive front steer axles that may have been incorrectly heat treated.
The risk: The improperly heat treated axles may fracture, resulting in a loss of vehicle control and increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will inspect the axles for specific heat code serial numbers. The affected axles will be replaced, free of charge. The recall began on August 1, 2016. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0404.
Mack Trucks, Inc.Manufacturer number SC0404View on NHTSA.gov
16V099000

POWER TRAIN:DRIVELINE:DRIVESHAFT

Feb 19, 2016
33,981 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2012-2016 Granite (GU), Pinnacle (CHU, CXU), TerraPro (LEU, MRU), Titan (TD), and LR trucks manufactured from September 1, 2011, through September 8, 2015. The cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may loosen.
The risk: If he cap nut loosens and falls off, the yoke can separate from the axle input shaft and allow the drive shaft to disconnect, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will replace the cap nut. The input shaft threads will be inspected for damage. Any damaged input shaft will be replaced. These repairs will be performed free of charge. An interim notice was sent to owners on April 25, 2016. The recall began on June 7, 2016. Owners may contact Mack customer service at 1-610-709-2131. Mack's recall campaign number for this recall is SC0399.
Mack Trucks, Inc.Manufacturer number SC0399View on NHTSA.gov
15V644000

TRAILER HITCHES:FIFTH WHEEL ASSEMBLY

Oct 13, 2015
448 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2014 Pinnacle (CHU and CXU) trucks manufactured September 10, 2010, to June 17, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage.
The risk: If the fifth wheel and locking mechanism are sufficiently damaged, the locking mechanism may fail to operate as intended and the trailer may unexpectedly detach from the tractor, increasing the risk of a crash.
The remedy: Mack will notify owners, and Fontaine dealers will replace the fifth wheel with an Ultra NT model fifth wheel, free of charge. The recall began on November 18, 2015. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0395.
Mack Trucks, Inc.Manufacturer number SC0395View on NHTSA.gov
15V521000

SERVICE BRAKES, AIR:DISC:CHAMBER

Aug 17, 2015
79 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2013-2015 Pinnacle (CXU) trucks manufactured from October 3, 2012, through February 18, 2014 and equipped with Meritor air disc brakes. In the affected vehicles, the brake chambers may have been incorrectly mounted resulting in internal contamination of the air brake calipers.
The risk: Contamination of the calipers may cause a loss of brakes on one wheel, lengthening the distance required to stop the vehicle, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will inspect the disc brake caliper and brake chamber to determine if the washers are located in the correct position. If the washers are in the correct position, no further action is required. If the washers are not located in the correct position, replacement of the disc brake caliper and brake chamber will be performed and the addition of two washers per brake assembly will be installed, free of charge. The recall began on September 30, 2015. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0392.
Mack Trucks, Inc.Manufacturer number SC0392View on NHTSA.gov
15V139000

TRAILER HITCHES:FIFTH WHEEL ASSEMBLY

Mar 11, 2015
262 units potentially affected
The defect: Mack Trucks, Inc (Mack) is recalling certain model year 2012-2015 CXU trucks manufactured February 4, 2011, to December 23, 2014, and equipped with an air release fifth wheel latch. The affected vehicles have a switch to release the fifth wheel latch that may invertently be pushed and cause the trailer to unintentionally disconnect from the tractor after the parking brake has been released.
The risk: An inadvertent decoupling of the trailer from the tractor may increase the risk of a crash.
The remedy: Mack will notify owners, and dealers will install a secondary action that operators will need to activate before the fifth wheel will release, free of charge. The recall began on May 6, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0390.
Mack Trucks, Inc.Manufacturer number SC0390View on NHTSA.gov
14V545000

FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL

Sep 9, 2014
538 units potentially affected
The defect: Mack Trucks, Inc. (Mack) is recalling certain model year 2013-2015 CXU and 2014-2015 CHU trucks manufactured August 23, 2012, through June 27, 2014, and equipped with adaptive cruise control. Due to a software error, the affected vehicles may not provide visual or audible alerts to the driver warning them that an obstruction in the road was detected.
The risk: If the driver is not warned of something being in the truck's path, there is an increased risk of a crash.
The remedy: Mack will notify owners, and dealers will reprogram the vehicle control unit, free of charge. The recall began on September 30, 2014. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0381.
Mack Trucks, Inc.Manufacturer number SC0381View on NHTSA.gov
14V208000

EXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT

Apr 18, 2014
44,047 units potentially affected
The defect: Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.
The risk: A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will replace the electronic flasher unit, free of charge. The recall will begin by mid-June 2014. Interim letters went out to owners on June 23, 2014. The recall began on July 25, 2014. Owners may contact Mack customer service at 1-866-298-6586. Mack's number for this recall is SC0379.
Mack Trucks, Inc.Manufacturer number SC0379View on NHTSA.gov
14V205000

EXTERIOR LIGHTING

Apr 18, 2014
1,342 units potentially affected
The defect: Mack Trucks Inc. (Mack) is recalling certain model year 2010-2015 CXU trucks manufactured November 20, 2009, through January 27, 2014, and equipped with dual vertical exhaust pipes. The white conspicuity reflectors on the rear of the cab could be blocked by the exhaust pipes. As such, these vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
The risk: A blocked reflector makes the truck-tractor less visible when operating the vehicle without a trailer in the dark, increasing the risk of a crash.
The remedy: Mack will notify owners, and dealers will inspect the trucks and if the reflectors are blocked, they will add two vertical white reflectors to the rear glass , free of charge. The recall began on May 30, 2014. Owners may contact Mack Customer Service at 1-336-393-2000. Mack's number for this recall is SC0378.
Mack Trucks, Inc.Manufacturer number SC0378View on NHTSA.gov
14V078000

ELECTRICAL SYSTEM

Feb 21, 2014
70,208 units potentially affected
The defect: Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM.
The risk: Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.
The remedy: Mack has notified owners, and dealers will inspect the EPDM. If contamination has occurred, dealers will replace the EPDM and address the leak, free of charge. Owners of model year 2010-2012 CHU, CXU, GU and TD vehicles were initially notified April 24, 2014. Owners affected by the recall expansions were notified in February 2015. Owners may contact Mack Trucks at 1-336-393-2000. Mack's number for this recall is SC0375.
Mack Trucks, Inc.Manufacturer number SC0375View on NHTSA.gov
13V492000

POWER TRAIN:AXLE HUBS

Oct 17, 2013
1,155 units potentially affected
The defect: Mack Trucks is recalling certain model year 2013-2014 CHU, CXU, GU, LEU, and MRU vehicles manufactured with pro-torque axle spindle nuts from August 28, 2012, through August 16, 2013. The pro-torque nut may not have been installed correctly, which may result in a loosening of the nut.
The risk: If the nut comes loose, the hub assembly may separate from the vehicle, increasing the risk of a crash.
The remedy: Mack Trucks will notify owners, and dealers will inspect and repair the vehicles, as necessary, free of charge. The recall began on November 12, 2013. Mack's recall number is SC0371. Owners may contact Mack Trucks at 1-336-393-2000.
Mack Trucks, Inc.Manufacturer number SC0371View on NHTSA.gov
13V195000

SERVICE BRAKES

May 13, 2013
5,203 units potentially affected
The defect: Mack Trucks, Inc. is recalling certain model year 2013-2014 CHU, CXU, GU, MRU, and LEU trucks manufactured July 16, 2012, through march 18, 2013 and equipped with drum brakes. The clevis pin for the brake slack adjuster may be missing a cotter pin. If the cotter pin is not installed, the clevis pin may loosen and fall out causing a loss of brake function on the affected wheel.
The risk: A loss of brake function at one wheel will lead to increased stopping distances and pulling to the left or right when braking, which may increase the risk of a crash.
The remedy: Mack Trucks, Inc. will notify owners, and dealers will inspect the brake slack adjusters and install the brake hardware, as necessary, free of charge. An interim was mailed to owners on June 20, 2013. A second notice was mailed to owners on September 30, 2013. Owners may contact Mack Trucks at 1-800-528-6586. Mack Trucks' recall campaign number is SC0370.
Mack Trucks, Inc.Manufacturer number SC0370View on NHTSA.gov
13V153000

PARKING BRAKE:CONVENTIONAL:AIR

Apr 22, 2013
331 units potentially affected
The defect: Mack Trucks, Inc. is recalling certain model year 2011-2013 CXU trucks manufactured November 23, 2010, through March 19, 2012. These vehicles are equipped with an MGM Type 24 J-series piston parking brake chamber. In the affected axles, the brake chambers may leak pressure allowing the parking brake to drag when it is supposed to be released. Brake dragging could lead to overheated brake components.
The risk: Overheated brake components could result in a fire.
The remedy: Mack Trucks will notify owners and the brake chambers will be replaced as needed, free of charge. The safety recall is expected to begin on, or before, June 17, 2013. Owners may contact Mack at 1-800-866-1177. Mack Truck's campaign recall number is SC0369.
Mack Trucks, Inc.Manufacturer number SC0369View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE20005ClosedPreliminary Evaluation

mDrive Transmission Failure to Disengage

Opened Apr 28, 2020
Closed Apr 4, 2022

On April 28, 2020, the Office of Defects Investigation (ODI) opened PE20-005 to investigate reports of 2013-2015 Mack CHU and CXU trucks equipped with mDrive transmissions continuing to push forward when stopping, possibly increasing the risk of a crash. After more field reports were discovered, the scope of the investigation was expanded to cover MY 2013-2016 vehicles. The mDrive transmission is Mack's version of Volvo's I-Shift transmission, an automated manual transmission that allows gear shifting without the use of a clutch pedal. Early I-Shift transmissions were recalled (13V-268) to address a missing redundant clutch disengagement switch that could prevent the clutch from automatically disengaging when the brake was applied. If a loss of signal from the brake air pressure switch occurred, the clutch would remain engaged while braking.Although Mack's mDrive transmission adopted the latest Volvo I-Shift design and was built with the redundant clutch switch, ODI received field reports alleging that the mDrive transmission would not disengage when coming to a stop like the Volvo I-Shift transmissions in recall 13V-268.After more than a year of information requests, data exchanges and grouping, and analyzing data, ODI was able to correlate two versions of transmission software (ID 23084009 and ID 23084004), with two frequently replaced parts ('solenoid valve' and 'cylinder assy clutch') as outliers. However, Mack dismissed the replacement parts as being normal service parts for worn clutch systems.According to Mack, unlike the I-Shift recall, loss of one or more of the switches would not keep the clutch engaged but might cause a delay in the clutch disengaging, possibly due to the software/control system settings, the worn parts and system reaction time.To demonstrate the possible switch failure outcomes, Mack outfitted a subject model truck with a panel that could disable each switch on command. During test drives at the Mack facility, the demonstrator truck stopped when the brake was applied each time, and the truck did not stall when the brake was applied, even when the clutch was engaged. Even though failure of one of the switches could delay clutch disengagement, the stopping distance would still be shorter than one of the recalled Volvo I-Shift transmission trucks. With this information, as well as a lack of known crash incidents related to this complaint, ODI concludes that the Mack vehicles do not present an unreasonable risk to motor vehicle safety. Although ODI is closing this PE, Mack/Volvo should continue improving the transmission control unit software to further refine the clutch disengagement strategy. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. Claims are still being submitted and the Agency will continue to monitor the issue and reserves the right to take further action if warranted by new circumstances.

POWER TRAIN:MANUAL TRANSMISSION

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .