RoadVitals

1993 Mazda 929

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
19
Latest Jul 31, 2004
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Oct 19, 2015
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
3
4 injuries, 0 deaths reported

Overview

Our database contains 19 NHTSA owner-reported complaints for the 1993 Mazda 929, most frequently naming the visibility, brakes and interior & seats categories. 1 safety recall has been issued covering this model year; and 23 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Visibility420.0%
  • Brakes420.0%
  • Interior & seats315.0%
  • Engine210.0%
  • Airbags210.0%
  • Tires & wheels210.0%
  • Seat belts15.0%
  • Suspension15.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
15V674000

ELECTRICAL SYSTEM:IGNITION:SWITCH

Oct 19, 2015
1,368,500 units potentially affected
The defect: Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
The risk: If the ignition switch overheats there would be an increased risk of a fire.
The remedy: Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on December 17, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.
Mazda North American OperationsManufacturer number 8715JView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

View all 19
Visibility
Filed Jul 31, 2004

REAR PASSANGER SIDE WINDOW IS DEFECTIVE. ALSO THREE OTHER PEOPLE HAVE HAD THE SAME PROBLEM WITH THE SAME WINDOW.*AK

NHTSA ID
10083073
Incident
Jun 10, 2004
Tires & wheels
Filed Sep 17, 2000

PURCHASED 4 TIRES 12/17/98 @129,217MILES. TIRES WERE 50,000 MILE WARRANTY. HAD TIRES ROTATED AND BALANCED SEVEN(7) TIMES BETWEEN PURCHASE DATE AND FAILUR DATE OF 8/21/00 TIRES STILL HAD 6-7/32 OF RUBBER ON TREAD WHEN 3 OUT OF 4 TIRES HAD THE TREAD SEPERATE FROM THE CASING. TIRES COMPLETELY FAILED WITH PLENTY OF RUBBER STILL LEFT. I DRIVE 35,000-40,000 MILES A YEAR ALL ROAD MILAGE. ON EVERY PREVIOUS SET OF TIRES I HAVE GOTTEN 10,000-15,000 ADDITIONAL MILES, EVEN THOUGH THEY WERE RATED AT 50,000. I DO NOT FEEL THE TIRES SHOUD HAVE A COMPLETE FAILURE WITH THIS MUCH TREAD LEFT ON THEM. HAD I NOT TAKEN CAR IN FOR NORMAL ROTATION AND BALANCE, AND THE DEALER POINTED OUT THE TREAD SEPERATION INSTEAD OF ON INTERSTATE 4 THE OUT COME MAY HAVE BEEN VERY DIFFERENT. 3 OUT OF THE TIRES COULD HAVE COME APART AT 70 MILES PER HOUR, AND QUITE FRANKLY COULD HAVE HAD A TERRIBLE ACCIDENT.( DOT NUMBER: TIRE SIZE: 20565SR15 )

NHTSA ID
731734
Incident
Aug 21, 2000
Tires & wheels
Filed Sep 7, 2000

WHILE DRIVING ABOUT 80 MPH LEFT FRONT TIRE HAD A TREAD SEPARATION. CONSUMER PULLED OVER WHILE TIRE STILL HAD AIR, THEN WENT FLAT. BRIDGETONE, TURANZA, P205/65 R15 92H AND DOT # EM9LDLF127. *AK TREAD SEPARATION OCCURD TO TWO TIRES AT 1500 MILES INTERVAL. *YH

NHTSA ID
869909
Incident
May 27, 2000
Visibility
Filed Oct 13, 1999

WHEN PUSHING AUTOMATIC BUTTON CONSUMER CAN HERE THE MOTOR RUNNING, BUT WINDOW WILL NOT MOVE. IN ORDER TO GET THE WINDOW UP, CONSUMER HAS TO OPEN DOOR AND USE BOTH HANDS TO PULL UP WINDOW MANUALLY. THIS PROBLEM EXISTS ON ALL THREE WINDOWS. *AK

NHTSA ID
850561
Incident
Sep 13, 1999
Electrical
Filed Jan 21, 1999

REAR WINDOW REGULATORS FAILED CAUSING THE WINDOWS NOT TO ROLL UP.

NHTSA ID
543456
Interior & seats
Filed Nov 18, 1998

SEAT FRAME BROKE DUE TO WELD FAILURE.

NHTSA ID
542649
Incident
Aug 20, 1998
Interior & seats
Filed Nov 17, 1998

DRIVER'S SEAT MOVES BACK & FORTH WHENEVER THE BRAKES OR ACCELERATOR PEDAL IS APPLIED. THE SEAT IS VERY UNSTABLE. *AK

NHTSA ID
830881
Incident
Aug 9, 1998
Interior & seatsSeat belts
Filed Oct 13, 1998

DRIVER'S SEAT BECOMES VERY LOOSE AND ROCKS BACK AND FORTH DURING ACCELERATION/ DECELERATION, AND BRAKING. VEHICLE BECOMES VERY DIFFICULT TO MAINTAIN, WELDED SECTION OF SEAT ADJUSTER ROD BROKE.

NHTSA ID
781203
Incident
Aug 20, 1998

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

MT-002-22

ELECTRICAL SYSTEM

Radio Unlocking Codes.

00-003-19-3583

ENGINE AND ENGINE COOLING; EQUIPMENT; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE

In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.

09-009-19-3566

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-034-18-3430a

EQUIPMENT; VEHICLE SPEED CONTROL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-034-18-3430

VEHICLE SPEED CONTROL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-035-17-3080

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Mazda 929 by model year
YearComplaintsRecallsInvestigationsIssue Index
1995310—
1994121049.6
1993Viewing191043.4
1992350037.4
1991181149.9
1990121247.1
1989362249.1
1988342354.0
1987001—
1986001—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.