RoadVitals

1990 Mazda MPV Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Oct 19, 2015
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
4 investigations on file

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

15V674000

ELECTRICAL SYSTEM:IGNITION:SWITCH

Oct 19, 2015
1,368,500 units potentially affected
The defect: Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
The risk: If the ignition switch overheats there would be an increased risk of a fire.
The remedy: Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on December 17, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.
Mazda North American OperationsManufacturer number 8715JView on NHTSA.gov
95V103005

SEAT BELTS:FRONT:BUCKLE ASSEMBLY

May 24, 1995
360,433 units potentially affected
The defect: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
The risk: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
The remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
MAZDA (NORTH AMERICA),INCView on NHTSA.gov
92V027000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:SHOES/LININGS

Feb 27, 1992
95,074 units potentially affected
The defect: THE REAR BRAKE LININGS CAN CHANGE OVER TIME. AS THE BRAKES WEAR, THE COEFFICIENT OF FRICTION CAN INCREASE, PRODUCING INCONSISTENT REAR BRAKE PERFORMANCE AND PREMATURE ACTIVATION OF THE ABS SYSTEM.
The risk: INCONSISTENT BRAKING AND PREMATURE ACTIVATION OF THE ABSSYSTEM CAN CAUSE SUDDEN STOPS OR INCREASED BRAKING DISTANCES, AND RESULT ININCREASED RISK OF VEHICLE ACCIDENT.
The remedy: REPLACE THE REAR BRAKE ASSEMBLIES WITH ASSEMBLIES WHOSE FRICTION CHARACTERISTICS DO NOT CHANGE. THIS WILL REDUCE THE RISK OF PREMATURE ABS SYSTEM ACTIVATION.
MAZDA (NORTH AMERICA),INCView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA95005ClosedEngineering Analysis

TAKATA SEAT BELT BUCKLE FAILURE

Opened Mar 10, 1995
Closed Aug 1, 1995

There is no summary currently available

SEAT BELTS:FRONT:BUCKLE ASSEMBLYLed to recall 95V103005
EA92008ClosedEngineering Analysis

INCONSIST.BRK PERFORMANCE

Opened Feb 3, 1992
Closed Mar 16, 1992

There is no summary currently available

SERVICE BRAKES, AIR:ANTILOCKLed to recall 92V027000
PE91134ClosedPreliminary Evaluation

INCONSISTENT BRAKE PERFORM

Opened Oct 1, 1991
Closed Feb 3, 1992

===

SERVICE BRAKES, HYDRAULIC
PE91088ClosedPreliminary Evaluation

THROTTLE STICKING

Opened Jun 18, 1991
Closed Oct 21, 1991

There is no summary currently available

VEHICLE SPEED CONTROL:LINKAGES

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .