RoadVitals

1990 Mazda MPV

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
47
Latest Mar 30, 2016
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Latest Oct 19, 2015
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
4
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
13
5 injuries, 0 deaths reported

Overview

Our database contains 47 NHTSA owner-reported complaints for the 1990 Mazda MPV, most frequently naming the transmission, brakes and seat belts categories. 3 safety recalls have been issued covering this model year; 4 NHTSA investigations name it; and 25 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

3 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
15V674000

ELECTRICAL SYSTEM:IGNITION:SWITCH

Oct 19, 2015
1,368,500 units potentially affected
The defect: Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
The risk: If the ignition switch overheats there would be an increased risk of a fire.
The remedy: Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on December 17, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.
Mazda North American OperationsManufacturer number 8715JView on NHTSA.gov
95V103005

SEAT BELTS:FRONT:BUCKLE ASSEMBLY

May 24, 1995
360,433 units potentially affected
The defect: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
The risk: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
The remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
MAZDA (NORTH AMERICA),INCView on NHTSA.gov
92V027000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:SHOES/LININGS

Feb 27, 1992
95,074 units potentially affected
The defect: THE REAR BRAKE LININGS CAN CHANGE OVER TIME. AS THE BRAKES WEAR, THE COEFFICIENT OF FRICTION CAN INCREASE, PRODUCING INCONSISTENT REAR BRAKE PERFORMANCE AND PREMATURE ACTIVATION OF THE ABS SYSTEM.
The risk: INCONSISTENT BRAKING AND PREMATURE ACTIVATION OF THE ABSSYSTEM CAN CAUSE SUDDEN STOPS OR INCREASED BRAKING DISTANCES, AND RESULT ININCREASED RISK OF VEHICLE ACCIDENT.
The remedy: REPLACE THE REAR BRAKE ASSEMBLIES WITH ASSEMBLIES WHOSE FRICTION CHARACTERISTICS DO NOT CHANGE. THIS WILL REDUCE THE RISK OF PREMATURE ABS SYSTEM ACTIVATION.
MAZDA (NORTH AMERICA),INCView on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

EA95005ClosedEngineering Analysis

TAKATA SEAT BELT BUCKLE FAILURE

Opened Mar 10, 1995
Closed Aug 1, 1995

There is no summary currently available

SEAT BELTS:FRONT:BUCKLE ASSEMBLYLed to recall 95V103005
EA92008ClosedEngineering Analysis

INCONSIST.BRK PERFORMANCE

Opened Feb 3, 1992
Closed Mar 16, 1992

There is no summary currently available

SERVICE BRAKES, AIR:ANTILOCKLed to recall 92V027000
PE91134ClosedPreliminary Evaluation

INCONSISTENT BRAKE PERFORM

Opened Oct 1, 1991
Closed Feb 3, 1992

===

SERVICE BRAKES, HYDRAULIC
PE91088ClosedPreliminary Evaluation

THROTTLE STICKING

Opened Jun 18, 1991
Closed Oct 21, 1991

There is no summary currently available

VEHICLE SPEED CONTROL:LINKAGES

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

View all 47
Airbags
Filed Mar 30, 2016
Crash reported

TL* THE CONTACT OWNS A 1990 MAZDA MPV. THE CONTACT STATED WHILE DRIVING, HE CRASHED INTO ANOTHER VEHICLE. THE AIR BAGS DID NOT DEPLOY. THERE WAS NO POLICE REPORT FILED. THERE WERE NO INJURIES SUSTAINED. THE VEHICLE WAS TAKEN TO THE CONTACT'S RESIDENCE. THE FAILURE MILEAGE WAS UNKNOWN.

NHTSA ID
10852402
Incident
Jun 13, 2011
Transmission
Filed Nov 27, 2003
Crash reported

VEHICLE WAS IDLING IN DRIVEWAY WHILE I WAS CHECKING TRANSMISSION FLUID LEVEL. SUDDENLY, IT DROVE AWAY IN REVERSE, CROSSED THE STREET AND WENT DOWN ANOTHER DRIVEWAY CRASHING INTO THE CORNER OF A GARAGE. IT THEN WENT ACROSS ANOTHER BACK YARD AND CRASHED INTO THE SIDE OF ANOTHER GARAGE. THE POLICE WERE NOTIFIED AND A REPORT WAS MADE. *LA

NHTSA ID
10047682
Incident
Oct 16, 2003
Mileage
154,000 mi
Suspension
Filed Apr 3, 2003

THE REAR SWAY BAR FAILED. MR SCC *JB

NHTSA ID
10012157
Incident
Jan 3, 2003
Mileage
114,000 mi
Transmission
Filed Jun 23, 2002

THE AUTOMATIC TRANSMISSION FAILED, CONSUMER WOULD LIKE TO KNOW IF THERE IS ANY SIMILAR COMPLAINT ON THIS ISSUE. *YD

NHTSA ID
786023
Incident
Jul 24, 1996
Brakes
Filed Jan 3, 2001

WHILE DRIVING IN ALL WHEEL DRIVE MODE THE ABS SENSOR FAILED CAUSING THE VEHICLE TO SUDDENLY COME TO A STOP. NLM

NHTSA ID
785225
Incident
Dec 21, 2000
Transmission
Filed Oct 29, 2000

THREE TIMES SINCE THIS I PURCHASED THIS CAR THE AUTOMATIC TRANSMISSION HAS FAILED AND REQUIRED A TOTAL REPLACEMENT. ON EACH OCCASION I HAVE REQUESTED SOME INFORMATION ABOUT WHAT MIGHT BE CAUSING THESE FAILURES. EACH TIME I WAS TOLD IT WAS JUST NORMAL WEAR AND TEAR. I DRIVE MOSTLY ON FREEWAYS AND CONSERVITIVILY AND DO NOT BELIEVE THIS IS NORMAL.

NHTSA ID
735407
Incident
Jan 29, 1993
EngineVisibility
Filed Dec 28, 1999

ENGINE HEAD GASKET/ WATER PUM, AND HEATER CORE FAILED 3 TIMES, SMOKE FROM THE ENGINE..

NHTSA ID
716559
Incident
Jul 25, 1998
Engine
Filed Dec 28, 1999

IT IS NOT REIABLE VEHICLE FOR ME, SPEACILLY IF THERE IS A KID. NO SAFETY DEFECT (S) LISTED IN SUMMARY. *AK

NHTSA ID
716558
Incident
Jul 25, 1998

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

09-009-19-3566

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-034-18-3430a

EQUIPMENT; VEHICLE SPEED CONTROL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-034-18-3430

VEHICLE SPEED CONTROL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

09-035-17-3080

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

0900716

ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER

Speedometer replacement procedure

09-034-14-2956

EQUIPMENT ADAPTIVE/MOBILITY

IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:•MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.•WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO (0) MILES.•THIS PROCEDURE IS EXTREMELY IMPORTANT TO ACCURATELY REPRESENT ACTUAL VEHICLE MILEAGE.•PRIOR TO SPEEDOMETER REMOVAL, COMPLETE THE INFORMATION REQUIRED ON THE “SPEEDOMETER REPLACE-MENT LABEL”. •LABELS CAN ONLY BE ORDERED THROUGH MSTORE, NOT MDCS.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Mazda MPV by model year
YearComplaintsRecallsInvestigationsIssue Index
2006122155.6
2005363358.8
2004715353.8
20031134054.5
20021244052.6
2001703053.4
20001495054.3
1999200—
1998191051.3
1997221053.5
1996181044.4
1995191041.7
1994361051.8
1993511151.4
1992601252.6
1991663661.1
1990Viewing473467.7
1989225262.4
1988002—
1987001—
1986001—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.