Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0
Overview
Our database contains 7 NHTSA owner-reported complaints for the 1992 Mazda MX6, most frequently naming the seat belts, suspension and powertrain (other) categories. 1 safety recall has been issued covering this model year; and 15 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
Monthly complaints peaked at 1 in Feb 1995. Most recent month: 1.View as table
Monthly owner complaints for the 1992 Mazda MX6
Month
Complaints filed
Cumulative
Feb 1995
1
1
Mar 1996
1
2
Oct 1998
1
3
Nov 1998
1
4
Mar 1999
1
5
Jan 2001
1
6
May 2002
1
7
What owners report
Complaints grouped by the component NHTSA recorded
Seat belts222.2%
Suspension222.2%
Powertrain (other)111.1%
Electrical111.1%
Visibility111.1%
Transmission111.1%
Engine111.1%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:DRUM
Oct 13, 1993
300 units potentially affected
The defect: THE GROOVE FOR THE REAR WHEEL BEARING RETAINER RING WAS INCORRECTLY MACHINED.
The risk: IF THE RETAINING RING DOES NOT SIT CORRECTLY IN THEGROOVE, THE AXLE LUG NUTS WILL BREAK, CAUSING THE BRAKE DRUM, WHEEL, AND TIREASSEMBLY TO SEPARATE FROM THE VEHICLE.
The remedy: MIDAS SHOPS WILL REPLACE THE BRAKE DRUMS WITH OTHER BRAKE DRUMS FROM ANOTHER SUPPLIER.
Reports submitted to NHTSA, shown in the owner's own words
Engine
Filed May 20, 2002
WHILE DRIVING VEHICLE AT OPERATING TEMP, CAR WILL DIE AND HAVE TO WAIT ABOUT THREE MINUTES BEFORE RESTARTING.
NHTSA ID
9005709
Incident
Oct 29, 2001
ElectricalTransmission
Filed Jan 16, 2001
EMERGENCY OVERRIDE BUTTON FAILED, VEHICLE WOULD NOT START. *SLC
NHTSA ID
559012
Powertrain (other)Suspension
Filed Mar 9, 1999
RIGHT ANDLEFT UPPER STRUTS IN FRONT END.MECHANIC SAID IT WAS AN INHERENT DEFECT AND WOULD PROBABLY HAPPEN AGAIN. THE PROBLEM WAS CORRECTED ON LATER MODELS.
NHTSA ID
704186
Incident
Sep 1, 1993
Seat belts
Filed Nov 13, 1998
RECALL # 97V211000 MAZDA/AUTOMATIC SHOULDER BELT RAIL; DEALER DID NOT EXPECT SHOUDLER BELT RAIL AS STATED IN RECALL NOTICE. CONSUMER WAS TOLD THAT SYSTEM DID NOT NEED TO BE INSPECTED UNLESS IT WAS NOT WORKING. *AK
NHTSA ID
829473
Incident
Oct 23, 1998
Suspension
Filed Oct 5, 1998
MECHANIC STATED THAT THE MOUNTING OFTHE STRUTS WAS DEFECTIVE IN THE EARLY 1992 MODELS AND THE CAUSE OF FAILURE IS BUMPS IN THE ROAD. ALSO STATED THAT IT WOULD PROBABLY HAPPEN AGAIN AND IT DID. MAZDA WOULD ONLY PAY FOR PARTS THIS TIME SINCE THE WARRANTY (TIME NOT MILEAGE) HAD EXPIRED.
NHTSA ID
780699
Incident
Sep 7, 1993
Seat belts
Filed Mar 14, 1996
BUCKLE ON MOTORIZED CABLE ON LEFT DRIVER SIDE STICKS IN RESUME POSITION. *AK
NHTSA ID
980713
Incident
Mar 12, 1996
Visibility
Filed Feb 6, 1995
REAR WINDOW SHATTERED. TT
NHTSA ID
959594
Incident
Feb 6, 1995
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
09-009-19-3566
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
09-034-18-3430a
EQUIPMENT; VEHICLE SPEED CONTROL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
09-034-18-3430
VEHICLE SPEED CONTROL
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.