EXTERIOR LIGHTING
2020 Mcneilus Rear Loader
Recalls, owner-reported complaints, investigations and safety data
Overview
Our database contains no NHTSA owner-reported complaints for the 2020 Mcneilus Rear Loader. 1 safety recall has been issued covering this model year; and 8 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Safety recalls
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
No owner complaints recorded for this model year
Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
McNeilus Truck and Manufacturing provides these instructions for replacing hardware on the front ejector shoes of a Rear Loader refuse vehicle in order to create greater clearance between the hardware and the ejector track. The potential clearance issue is specific to vehicles with hex head fasteners at the front lower and upper ejector shoes.
SUSPENSION
McNeilus Truck and Manufacturing requires an inspection and replacement, if needed, to ensure the Bob Tail® Huck® bolts are fully swaged with correct thread exposure on the rear pivot cross member body mounts. Revision A updates the replacement bolt length to 90mm
SUSPENSION
McNeilus Truck and Manufacturing requires an inspection and replacement, if needed, to ensure the Bob Tail® Huck® bolts are fully swaged with correct thread exposure on the rear pivot cross member body mounts.
ELECTRICAL SYSTEM
McNeilus Truck and Manufacturing offers these instructions for the programming installation for the Deep Sea Display.
ELECTRICAL SYSTEM
McNeilus Truck and Manufacturing offers these instructions for programming the 5” IFM display CR1058 (McNeilus PN 1641423) for Rear Loader (Standard model 10 and tag axle model 12), Meridian Front Loader (model 78), and Zero Radius Side Loader (model 48).
ELECTRICAL SYSTEM
McNeilus Truck and Manufacturing offers these instructions for programming the 7” IFM display CR1083 (McNeilus PN 1649565) for Rear Loader (Standard model 10 and tag axle model 12), Meridian Front Loader (model 78), and Zero Radius Side Loader (model 48).
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.