BACK OVER PREVENTION:WARNINGS:EXTERNAL/PEDESTRIAN ALERT
2023 Mercedes-Benz EQE SUV 350 4MATIC
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 1 NHTSA owner-reported complaint for the 2023 Mercedes-Benz EQE SUV 350 4MATIC, most frequently naming the electrical category. 3 safety recalls have been issued covering this model year; and 197 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 1 month of data.
What owners report
Complaints grouped by the component NHTSA recorded
- Electrical1100.0%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
3 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS
ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM):SOFTWARE
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
The contact owns a 2023 Mercedes-Benz EQE 350 4Matic. The contact stated while driving 40 MPH, the vehicle jerked and unintendedly decelerated to 20 MPH. Several unknown warning lights were illuminated. A message advising that there was no more battery power and to pull over was displayed. The contact was able to pull to the side of the road. The contact turned off and restarted the vehicle, and the vehicle operated as needed. The vehicle was taken to the dealer, where it was diagnosed and determined that the electrical systems had failed. The dealer rebooted the vehicle; however, the failure recurred while driving. The vehicle was towed to the dealer, where the control unit software was updated, and the battery management system software was updated under Mercedes-Benz Campaign Number: 2024060002. Additionally, the dealer test-drove the vehicle; however, the failure could not be replicated. The vehicle was repaired. The contact stated that she had stopped driving the vehicle due to safety concerns. The contact related the failure to NHTSA Campaign Number: 24V372000 (Electrical System). The manufacturer was notified of the failure and informed the contact that there was a consideration to buyback the vehicle. The failure mileage was approximately 2,707.
- NHTSA ID
- 11614862
- Incident
- Apr 12, 2024
- Mileage
- 2,707 mi
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ELECTRICAL SYSTEM
Complaint When switching the front passenger display on and off, sporadic images may be shown that are similar to stains on the display. This complaint need not be a permanent one, it may disappear again on its own. Cause Implausible video transfer from head unit during start and switch‑off sequence. These images (artifacts) are of a purely cosmetic nature only and they do not impair the function. Remedy Software update of MBUX (A26/17) to software release E316.5 or higher.
ELECTRICAL SYSTEM
Issue A software update will be performed that provides enhancements to the robustness and system stability of the communication module. The update is free of charge and runs in the background, which takes about 8 minutes to install. During this time, the vehicle can be driven without any restrictions, and the new software will be active with the next ignition cycle. Remedy MBUSA will conduct an OTA service campaign. Remote software updates are automatically downloaded and installed in the customer’s vehicle free of charge and do not require a dealer visit.
STEERING
Complaint Slight creaking noises when steering. Cause Noises may come from one or more sleeves of the horn contact plate. Remedy Remove the horn contact plate and check the sleeves for noise; see attached video. If necessary, apply lubricant to the sleeves.
ELECTRICAL SYSTEM
A software update will be performed that provides enhancements to the robustness and system stability of the communication module. The update is free of charge and runs in the background, which takes about 8 minutes to install. During this time, the vehicle can be driven without any restrictions, and the new software will be active with the next ignition cycle. Remedy MBUSA will conduct an OTA service campaign. Remote software updates are automatically downloaded and installed in the customer’s vehicle free of charge and do not require a dealer visit.
SERVICE BRAKES
Complaint Repeat workshop visit for vehicle vibration while braking from 60MPH. NOTE: Although the symptom is similar to a tire or wheel vibration, it is usually readily noticeable that it is distinctly different if it happens at all times or only while braking. Cause Although the cause of the vibration is most likely due to excessive lateral runout on the rotor or hub/wheel bearing, the system as a whole needs to be checked for other possible contributors. 1. Prior collision damage. 2. Excessive vehicle sitting times without rotating components. 3. Wheel bearing/hub lateral runout. 4. Wheel mating interface has been overtightened (did not follow WIS torque procedures). 5. Mating interfaces have been excessively modified (painted, gouged, bent, etc...). Remedy Read through the entire attached worksheet prior to performing. After performing, please review the final page and perform work accordingly. NOTE: This document is not pre‑authorization or otherwise dealing with warranty. This is intended for diagnostic purposes only. If there are any questions on how to proceed OR The work sheet has been performed and the vehicle has returned with the same concern. Please perform the measurements as seen in the worksheet again and open a TIPS case to the Body, Chassis, and Entertainment team.
ELECTRICAL SYSTEM
Complaint Issue after OTA Update IC Odometer Reading blank("_ _ _ _") IC Maintanence data unavailable Cause OTA Update E61.0 Remedy In the IC Control Unit Log, please check the following information: Verify whether DTCs B228229, B228287, and B226656 are present in either A or A+S. Verify that Status Schlüssel‑ID = "ID is not valid" and Anlernstatus = "IC is initialized", as shown in the attached image (image_2). Please run the XENTRY guided test for the listed DTCs and provide the results.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.