STEERING:HYDRAULIC POWER ASSIST:POWER STEERING FLUID
2005 Nabi 60LFW
Recalls, owner-reported complaints, investigations and safety data
Overview
Our database contains no NHTSA owner-reported complaints for the 2005 Nabi 60LFW. 1 safety recall has been issued covering this model year; 1 NHTSA investigation names it; and 2 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Safety recalls
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govSafety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.
WELD SEPARATION
THIS INVESTIGATION WAS OPENED AS THE RESULT OF A REPORT ALLEGING THAT AN ARTICULATING BUS OWNED BY THE CHICAGO TRANSIT AUTHORITY (CTA) HAD EXPERIENCED A WELD FAILURE AT THE ARTICULATION JOINT OF THE BUS.IN EARLY APRIL, ODI AND VRTC ENGINEERS VISITED WITH THE CTA AND CONFIRMED THE FAILURE ALLEGATION. THE SEPARATION OF THE NABI ARTICULATING BUS WAS THE RESULT OF A WELD FAILURE THAT OCCURRED IN THE PARENT METAL OF THE ROLLED PLATE BRACKET. THE FRACTURE OCCURRED JUST BEYOND THE WELD LINE WHERE THE BRACKET IS WELDED TO THE ARTICULATING JOINT CASTING.THE FATIGUE FRACTURE APPEARED TO BE CAUSED BY TORSIONAL FORCE LOADING THROUGH THE JOINT CONFIGURATION.BENDING MOMENT FATIGUE INITIATED THE FRACTURE CAUSED BY FORE AND AFT ROTATIONAL LOADING THAT COULD BE GENERATED BY, AMONG OTHER FORCES, BOTH POSITIVE AND NEGATIVE WHEEL TORQUE (ACCELERATION AND BRAKING).A VISUAL EVALUATION OF THE SURROUNDING STRUCTURE SUGGESTS THAT SEVERAL WELDED MEMBERS FORM A BOX BEAM AND ARE INTENDED TO REACT TO THE TORQUE AND PREVENT THE MAIN STRUCTURAL WELD FROM BENDING, BUT THE UN-REINFORCED MATERIALS APPEAR TO BE INADEQUATE FOR THE FORCES GENERATED IN THIS APPLICATION. ON APRIL 16, 2009, NABI IDENTIFIED A DEFECTIVE WELDED CROSSMEMBER ASSEMBLY IN THE UNDERSTRUCTURE OF THESE BUSES.AFTER FURTHER EVALUATION, NABI DECIDED TO FILE A DEFECT REPORT WITH THE AGENCY. NABI WILL ARRANGE TO INSPECT AND REPAIR ALL AFFECTED BUSES, INCLUDING INSTALLATION OF ADDITIONAL REINFORCEMENT TO THE AFFECTED AREAS.THIS RECALL ACTION RESOLVES THE ISSUES RAISED BY THIS INVESTIGATION. ACCORDINGLY, THIS INVESTIGATION IS CLOSED.
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
No owner complaints recorded for this model year
Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
NORTH AMERICAN BUS INDUSTRIES INC.: CLOSE OUT GETTING LOOSE DUE TO HAVING WASHER LOCK BEING LEFT OFF. NO MODEL OR MODEL YEAR LISTED. *PE
EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION
NABI: AN INCORRECT COLOR ELECTRICAL CONNECTOR (BLUE) WAS USED FOR TCM, VCM AND DPIM MODULE HARNESSES AND CAN CAUSE CONFUSION, TROUBLESHOOTING ISSUES AND AN INCREASE IN DOWNTIME AND NEEDS TO BE REPAIRED WITH CORRECT COLOR (RED) CONNECTORS ON SOME BUSES.. MODELS 40-60 FT HYBRID. *PE
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.