RoadVitals

2016 Peterbilt 220 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Sep 22, 2017
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

17V593000

STEERING; STEERING:LINKAGES:TIE ROD ASSEMBLY

Sep 22, 2017
17,737 units potentially affected
The defect: PACCAR Incorporated (PACCAR) is recalling certain 2016 Peterbilt 220, 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 389, 389G, 567, 579 and 587 trucks and Kenworth K170, T170, T270, T370, T440, T470,T660, T680, T800, T880, and W900 trucks equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.
The risk: If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering and increasing the risk of a crash.
The remedy: PACCAR will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary. If the tie rod stud and knuckle on units cannot be sufficiently torqued, the dealer will replace the knuckle and tie rod end assembly, free of charge. The recall began on November 13, 2017. Owners may contact Peterbilt customer service at 1-940-591-4000 or Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is P817-C.
PACCAR IncorporatedManufacturer number P817-CView on NHTSA.gov
17V554000

POWER TRAIN:AXLE ASSEMBLY

Sep 6, 2017
2,975 units potentially affected
The defect: PACCAR Incorporated (PACCAR) is recalling certain 2009-2010 Peterbilt 210 and 220 trucks; 2012-2018 Peterbilt 210 and 220 trucks; and 2010-2018 Kenworth K270 and K370 trucks. These LFNA trucks have a front axle sway bar link that may come loose on the frame rail end and fall into the path of the drag link, possibly binding the steering system.
The risk: If the sway bar link detaches and falls into the drag link, it may impact the ability of the vehicle to steer properly, increasing the risk of a crash.
The remedy: PACCAR will notify owners, and dealers will inspect the upper sway bar link attachment for a hardened washer installed between the bushing and the nut, installing a washer if it is missing, free of charge. The recall began on October 2730, 2017. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 817-D and 17KWE.
PACCAR IncorporatedManufacturer number 817-D and 17KWEView on NHTSA.gov
15V206000

VEHICLE SPEED CONTROL:CRUISE CONTROL

Apr 7, 2015
379 units potentially affected
The defect: PACCAR Incorporated (PACCAR) is recalling certain model year 2015-2016 Peterbilt 220 and Kenworth K300 trucks manufactured September 1, 2014, to March 30, 2015. Each time the cruise control speed decrease button is pressed, the vehicle speed will actually increase by one mile per hour.
The risk: If a driver is intending to slow down a vehicle but instead it inadvertently speeds up, there is an increased risk of a crash.
The remedy: PACCAR will notify owners, and dealers will update the cab controller software, free of charge. The recall began on June 5, 2015. Owners may contact Peterbilt customer service at 1-940-591-4000, or Kenworth customer service at 1-425-828-5000. PACCAR's numbers for this recall are 415-E and 15KWC.
PACCAR IncorporatedManufacturer number 415-E and 15KWCView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources