RoadVitals

1995 Plymouth Breeze

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Latest Oct 9, 2009
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
2
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 1995 Plymouth Breeze. 3 safety recalls have been issued covering this model year; 2 NHTSA investigations name it; and 59 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

3 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
09E056000

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

Oct 9, 2009
5,787 units potentially affected
The defect: QUALIS AUTOMOTIVE IS RECALLING CERTAIN AFTERMARKET BALL JOINTS SOLD FOR USE ON CERTAIN PASSENGER VEHICLES. THE SOCKET MAY HAVE BEEN EXCESSIVELY HARDENED WHICH COULD CAUSE IT TO CRACK NEAR THE RETAINING RING GROOVE ALLOWING THE BALL STUD TO SEPARATE UNDER IMPACT LOAD. THE SUBJECT BALL JOINTS WERE SOLD AS FOUR PART NUMBERS, D10945, D10946, G10945, AND G10946. THE AFFECTED CONTROL ARMS, D10945 AND D10946, ARE STAMPED WITH THE FOLLOWING DATES ON THE BALL JOINTS: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, AND 116609. THE G10945 AND G10946 ARE THE SAME PART AS THE D10945 AND D10946 RESPECTIVELY. THEY ARE LABELED DIFFERENTLY DEPENDING ON THE AFTERMARKET CUSTOMER.
The risk: SEPARATION OF THE BALL STUD FROM THE SOCKET OF THE BALL JOINT HOUSING WOULD ALLOW THE CONTROL ARM TO COLLAPSE AND THE WHEEL TO FOLD IN CAUSING LOSS OF STEERING CONTROL, POSSIBLY RESULTING IN A CRASH.
The remedy: QUALIS AUTOMOTIVE WILL REPLACE THE BALL JOINTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2009. OWNERS MAY CONTACT QUALIS AUTOMOTIVE AT 1-800-493-4128.
QUALIS AUTOMOTIVE LLCView on NHTSA.gov
06E088000

FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

Oct 23, 2006
39,243 units potentially affected
The defect: CERTAIN TIGAS FUEL PUMP MODULES MANUFACTURED BETWEEN JUNE 1 AND SEPTEMBER 24, 2006, SOLD UNDER VARIOUS BRAND NAMES AND P/NOS. THESE FUEL PUMP MODULES ARE SOLD AS AFTERMARKET FOR USE IN CERTAIN DAIMLERCHRYSLER VEHICLES LISTED ABOVE. SILICONE MATERIAL USED IN MANUFACTURE OF THE FLAPPER VALVE WAS OUT-OF-SPECIFICATION, LEADING TO EXCESS SWELL OF THE FLAPPER VALVE RESTRICTING THE FLOW OF FUEL TO THE FUEL PUMP MODULE.
The risk: FUEL RESTRICTION COULD RESULT IN LOSS OF POWER AND/OR ENGINE STALL, POSSIBLY RESULTING IN A VEHICLE CRASH.
The remedy: TI AUTOMOTIVE WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMP MODULES FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 6, 2006. OWNERS MAY CONTACT TI AUTOMOTIVE TOLL-FREE AT 1-877-461-1834.
TI GROUP AUTOMOTIVE SYSTEMS, LLCView on NHTSA.gov
97V201000

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

Nov 13, 1997
599,000 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE LOWER CONTROL ARM BALL JOINT CAN SEPARATE DUE TO LOSS OF LUBRICATION.
The risk: SEPARATION OF THE BALL JOINT COULD CAUSE A LOSS OF STEERING CONTROL INCREASING THE RISK OF A VEHICLE CRASH.
The remedy: DEALERS WILL INSPECT THE BALL JOINT END HOUSING COVER SEAL FOR LEAKAGE WITH A HIGH PRESSURE AIR TESTER AND THE RUBBER BOOT WILL BE VISUALLY INSPECTED FOR DAMAGE. IF THE COVER SEAL LEAKS OR THE BOOT IS DAMAGED, THE LOWER CONTROL ARM WILL BE REPLACED.
CHRYSLER CORPORATIONView on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

EA03011ClosedEngineering Analysis

AUTO TRANS IGNITION-PARK INTERLOCK

Opened Jul 17, 2003
Closed Jan 30, 2004

THE MANUFACTURER REPORTS ABOVE ARE BASED ON DAIMLERCHRYSLER?S (DC) ANALYSIS OF MODEL YEAR (MY) 1998 (POPULATION = 356,384) AND 1999 (POPULATION = 486,948) JA, JX AND LH FAMILY SUBJECT VEHICLE DATA (EARLIER MYS EXCLUDED).THE POPULATION NUMBER INCLUDES ALL MYS.THE PRECISE NUMBER OF DUPLICATES BETWEEN ODI AND DC REPORTS CANNOT BE DETERMINED DUE TO MISSING OR INCOMPLETE INFORMATION.THE FATALITY INCIDENT INVOLVED AN ELDERLY PERSON WHO ATTEMPTED TO STOP A ROLL AWAY VEHICLE AND RECEIVED FATAL INJURIES.ODI ALSO GATHERED INFORMATION ON MY 1997-99 PROWLER VEHICLES IN THIS INVESTIGATION. THE PROWLER VEHICLES WERE MANUFACTURED WITH A DIFFERENT DESIGN SHIFTER MECHANISM (THE SHIFT LEVER IS SHORTER).THERE ARE NO COMPLAINTS OF PROWLER INTERLOCK FAILURE IN ODI?S DATABASE, AND DC HAS RECEIVED NO REPORTS EITHER.THE PROWLER IS EXCLUDED FROM THE RECALL SCOPE.THE INVESTIGATION INVOLVED A CONDITION WHERE THE INTERLOCK SYSTEM COULD FAIL (OR BE MADE INOPERATIVE BY THE OPERATOR) DURING VEHICLE USE, POSSIBLY INADVERTENTLY.THE INTERLOCK SYSTEM IS REQUIRED UNDER FMVSS 114.WITH THE TRANSMISSION IN THE PARK POSITION AND THE IGNITION KEY OFF, THE COMBINED ACTION OF PRESSING THE SHIFT BUTTON AND PULLING THE SHIFT LEVER REARWARD MAY RESULT IN THE OPERATOR OVERCOMING THE INTERLOCK SYSTEM AND CAUSE THE MECHANICAL LINKAGE OF THE SYSTEM TO DISCONNECT.WHEN THIS OCCURS, THERE IS NO OVERT INDICATION TO AN OPERATOR THAT THE SYSTEM IS DEFEATED, AND AN INCREASED RISK OF VEHICLE ROLL-AWAY EXISTS.UNDER RECALL 04V021, DC WILL REPLACE DAMAGED SHIFT MECHANISMS, AND WILL INSTALL ON ALL VEHICLES A DEVICE WHICH INHIBITS THE OPERATOR?S ABILITY TO OVERCOME THE INTERLOCK AND DEFEAT THE SYSTEM.BEGINNING WITH MY 2000, DC INCORPORATED A BRAKE AND TRANSMISSION SHIFTER INTERLOCK (BTSI) SYSTEM INTO THE SUBJECT VEHICLES.INTRODUCTION OF BTSI INVOLVED DESIGN CHANGES TO THE SHIFT MECHANISM, ONE OF WHICH RESULTED IN REDUCED MECHANICAL ADVANTAGE (RMA) OF THE SHIFT BUTTON.THE RMA SHIFTER REQUIRES INCREASED FORCES TO OVERCOME THE INTERLOCK SYSTEM, MAKING THE SHIFTER LESS SUSCEPTIBLE TO DAMAGE.

POWER TRAIN:AUTOMATIC TRANSMISSIONLed to recall 04V021000
DP03002ClosedDefect Petition

STEERING COLUMN SEPARATION

Opened May 7, 2003
Closed Jul 22, 2003

MR. LARRY A. SACKEY SUBMITTED A PETITION TO THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION (NHTSA) BY LETTER DATED APRIL 18, 2003, REQUESTING THAT NHTSAFURTHER INVESTIGATE THE DEFECTIVE COLLAPSIBLE STEERING SHAFT SYSTEM ON 1987-1995 VEHICLES MANUFACTURED BY THE DAIMLERCHRYSLER CORPORATION.IN PART BECAUSE OF 49 CFR ? 30120(G), NHTSA HAS DECIDED TO LIMIT THE SCOPE OF THE PETITION VEHICLES TO 1993-1995 MODELS, EXCLUDING THE 1993 JEEP GRAND CHEROKEE AND 1994-1995 DODGE RAM SERIES TRUCKS THAT WERE RECALLED (93V210 & 96V230) FOR STEERING COLUMN FAILURE.IF THE ANALYSIS OF THESE VEHICLES HAD IDENTIFIED A POTENTIAL PROBLEM, THE SCOPE COULD HAVE BEEN EXPANDED IN AN INVESTIGATION.A REVIEW OF ODI'S DATA BASE SHOWS NO RECENT COMPLAINTS AND A LACK OF A COMPLAINT TREND CONCERNING THE SUBJECT ISSUE ON THE SUBJECT VEHICLES AS A WHOLE OR BY INDIVIDUAL MODELS.THEREFORE, THE PETITION IS DENIED.FOR DETAILS, SEE FEDERAL REGISTER NOTICE VOLUME 68, NO. 130, JULY 8, 2003.

STEERING:COLUMN

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

R2118796A

ENGINE AND ENGINE COOLING

Valve Body. These may cause over drive cycling.

23-014-15

EQUIPMENT

Child Seat Tether Anchor Installation This bulletin describes procedures to install Child Seat Tether Anchors based on Customer Request. Retrofits are subject to part availability. Vehicles in the following list that are marked **** for the model year are no longer supported with OEM retrofit kits. NOTE: Dealers are encouraged to honor any customers? request for the installation of the Child Seat Tether Anchors and Dealer reimbursement will be made by FCA US LLC regardless of vehicle age or mileage. See the Warranty Policy and Procedure Manual and/or Warranty Bulletin D-08-33 for reimbursement detail.

0801003

SEAT BELTS

SEAT BELT CINCH BAR SERVICE FOR VARIOUS MODELS INCLUDING 2004 MODELS. *TT

1802002

FLASH PROGRAMMING FAILURE RECOVERY. *SLC

1802001

ENGINE AND ENGINE COOLING:ENGINE:GASOLINE

EXHIBITING ROUGH IDLE, HARD START AND START & STALL.*CLS

1801201

EQUIPMENT

SUBJECT REGARDING GENERIC SCAN TOOL (GST), PUBLICATION NO. 81-170-00008 PROVIDED WITH THIS TECHNICAL SERVICE BULLETIN TO PROVIDE REFERENCE INFORMATION WHEN USING GENERIC SCAN TOOL ON OBDII VEHICLES. *TT

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Plymouth Breeze by model year
YearComplaintsRecallsInvestigationsIssue Index
2002100—
2000389270.2
19991177470.3
19981747263.6
19971558363.1
199618210158.0
1995Viewing032—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.