RoadVitals

1999 Plymouth Prowler Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
6
Newest Oct 23, 2006
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

6 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

06E088000

FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

Oct 23, 2006
39,243 units potentially affected
The defect: CERTAIN TIGAS FUEL PUMP MODULES MANUFACTURED BETWEEN JUNE 1 AND SEPTEMBER 24, 2006, SOLD UNDER VARIOUS BRAND NAMES AND P/NOS. THESE FUEL PUMP MODULES ARE SOLD AS AFTERMARKET FOR USE IN CERTAIN DAIMLERCHRYSLER VEHICLES LISTED ABOVE. SILICONE MATERIAL USED IN MANUFACTURE OF THE FLAPPER VALVE WAS OUT-OF-SPECIFICATION, LEADING TO EXCESS SWELL OF THE FLAPPER VALVE RESTRICTING THE FLOW OF FUEL TO THE FUEL PUMP MODULE.
The risk: FUEL RESTRICTION COULD RESULT IN LOSS OF POWER AND/OR ENGINE STALL, POSSIBLY RESULTING IN A VEHICLE CRASH.
The remedy: TI AUTOMOTIVE WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMP MODULES FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 6, 2006. OWNERS MAY CONTACT TI AUTOMOTIVE TOLL-FREE AT 1-877-461-1834.
TI GROUP AUTOMOTIVE SYSTEMS, LLCView on NHTSA.gov
06E022000

SERVICE BRAKES, HYDRAULIC

Mar 13, 2006
7,440 units potentially affected
The defect: CERTAIN AFTERMARKET BRAKE HYDRAULIC MASTER CYLINDERS SOLD AS REPLACEMENT BRAKE CYLINDERS FOR CERTAIN FORD, DAIMLERCHRYSLER, AND JEEP PASSENGER VEHICLES. THESE BRAKE CYLINDERS WERE SOLD UNDER THE BRAND NAMES OF NAPA, RAYBESTOS, AIMCO, AC DELCO, CARQUEST, BENDIX, AND WAGNER. ONLY PRODUCTS THAT WERE MANUFACTURED FROM JULY 27, 2005 THROUGH JANUARY 17, 2006 (DATE CODES 0529 THROUGH 0602) ARE SUBJECT TO THIS RECALL. WHEN SUBJECT TO VERY COLD TEMPERATURES, AN INTERNAL SEAL IN THE MASTER CYLINDER COULD LOSE FLEXIBILITY AND MAY CAUSE BRAKE FLUID TO LEAK.
The risk: LOSS OF BRAKE FLUID CAN LEAD TO A DECREASE IN BRAKE LINE PRESSURE AND AN INCREASE IN STOPPING DISTANCE, WHICH CAN RESULT IN A VEHICLE CRASH.
The remedy: AFFINIA (BRAKE PARTS, INC.) WILL REPLACE THE SUBJECT BRAKE HYDRAULIC MASTER CYLINDERS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 20, 2006. OWNERS CAN CONTACT AFFINA GROUP CUSTOMER SERVICE AT 1-800-323-0354.
BRAKE PARTS, INC.View on NHTSA.gov
03V034000

SUSPENSION:FRONT:CONTROL ARM:LOWER ARM

Feb 5, 2003
11,698 units potentially affected
The defect: ON CERTAIN PASSENGER VEHICLES, THE LOWER CONTROL ARM BALL JOINTS MAY EXPERIENCE A LOSS OF LUBRICATION THAT CAN RESULT IN ACCELERATED WEAR AND POSSIBLE SEPARATION FROM THE STEERING KNUCKLE.
The risk: A BALL JOINT THAT HAS SEPARATED MAY RESULT IN LOSS OF DIRECTIONAL CONTROL.
The remedy: DEALERS WILL REPLACE THE FRONT LOWER CONTROL ARM BALL JOINTS WITH MODIFIED ASSEMBLIES. OWNER NOTIFICATION BEGAN ON APRIL 4, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403 OR CHECK ON-LINE AT HTTP://WWW.CHRYSLER.COM/WEBSELFSERVICE/CHRYSLER/INDEX.JSP
DAIMLERCHRYSLER CORPORATIONManufacturer number C03View on NHTSA.gov
99V313000

STRUCTURE:FRAME AND MEMBERS

Nov 4, 1999
546 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. SOME ALUMINUM CASTINGS USED IN THE MANUFACTURE OF THE VEHICLE FRAME MAY HAVE MISSED THE REQUIRED HEAT TREATMENT OPERATION RESULTING IN SOFT FRAME CASTINGS.
The risk: SOME OF THESE FRAMES COULD FRACTURE UNDER VEHICLE OPERATING CONDITIONS, RESULTING IN LOSS OF VEHICLE HANDLING OR VEHICLE CONTROL.
The remedy: DEALERS WILL REPLACE THESE VEHICLES.
DAIMLERCHRYSLER CORPORATIONManufacturer number 855View on NHTSA.gov
99V245000

INTERIOR LIGHTING

Sep 15, 1999
3,102 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE BRAKE SYSTEM ON THESE VEHICLES DOES NOT COMPLY WITH FMVSS NO. 105, "HYDRAULIC BRAKE SYSTEMS."
The risk: THE BRAKE INDICATOR LAMP CIRCUIT DOES NOT CONTAIN THE REQUIRED GROUND CIRCUIT TO ILLUMINATE THE LAMP IN THE EVENT OF A BRAKE SYSTEM HYDRAULIC MALFUNCTION.
The remedy: DEALERS WILL ATTACH A WIRING JUMPER TO THE BRAKE SYSTEM PRESSURE DIFFERENTIAL SWITCH.
DAIMLERCHRYSLER CORPORATIONManufacturer number 844View on NHTSA.gov
98V104000

INTERIOR LIGHTING

May 14, 1998
457 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE BACK LIGHT BULBS FOR THE LIQUID CRYSTAL DISPLAY FOR THE GEAR SHIFT POSITION (PRNDL) AND THE ODOMETER WERE NOT PROPERLY INSTALLED.
The risk: IF THE BULBS FALL OUT, THE DISPLAY MAY BE DIFFICULT TO READ.
The remedy: DEALERS WILL REPLACE THE INSTRUMENT CLUSTER ASSEMBLY WITH CLUSTERS THAT HAVE BULBS THAT HAVE BEEN PROPERLY TWIST-LOCKED IN PLACE.
CHRYSLER CORPORATIONView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA02033ClosedEngineering Analysis

BALL JOINT SEPARATION

Opened Nov 26, 2002
Closed Feb 10, 2003

ODI HAS RECEIVED COMPLAINTS THAT THE SUBJECT VEHICLES HAVE HAD ONE OR BOTH OF THEIR LOWER BALL JOINTS SEPARATE AND CAUSE THE FRONT OF THE VEHICLE TO DROP TO THE GROUND.DAIMLER CHRYSLER?S ASSESSMENT OF THE BALL JOINT FAILURES IS THAT THE JOINT FAILURE MAY BE PRECIPITATED BY THE LOSS OF JOINT LUBRICATION.THE LOSS OF LUBRICATION COULD RESULT IN ACCELERATED WEAR AND POSSIBLE JOINT SEPARATION. DAIMLER CHRYSLER BELIEVES THAT THE LOSS OF JOINT LUBRICATION IS THE RESULT OF LEAKS OR TEARS IN THE RUBBER BOOT THAT PROTECTS THE BALL JOINT.THESE LEAKS OR TEARS COULD BE CAUSED BY CONTACT WITH OTHER INTERNAL PARTS OF THE BALL JOINT OR TORSIONAL LOADING THAT TWISTS THE BOOT.BY LETTER DATED FEBRUARY 4, 2003, THE MANUFACTURER ADVISED THIS AGENCY OF ITS DECISION TO INITIATE A SAFETY RECALL CAMPAIGN FOR ALL OF THE 11,698 SUBJECT VEHICLES BUILT FROM JANUARY, 1997 TO MARCH, 2001 TO CORRECT THE DEFECT IDENTIFIED IN THIS EA (COPY ATTACHED).THE ACTION IS IDENTIFIED BY NHTSA AS RECALL NO. 03V-034.

SUSPENSIONLed to recall 03V034000
PE02062ClosedPreliminary Evaluation

BALL JOINT

Opened Aug 13, 2002
Closed Nov 26, 2002
SUSPENSION

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .