2017 Toyota Corolla Im

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

The contact owns a 2017 Toyota IM. The contact stated that while driving approximately 50 MPH or faster, the engine started choking and the vehicle hesitated and started losing automotive power. While the vehicle was idling at a stoplight, the RPM fluctuated between 700 and 500, and the vehicle vibrated as if it was about to stall. There were no warning lights illuminated. The vehicle was taken to a dealer, but was not diagnosed. The vehicle was taken to the dealer approximately 3 or 4 times; however, the failure persisted. The contact researched and became aware that similar vehicles were recalled for a defective fuel pump; however, the contact’s VIN was not included. The vehicle was taken to a second dealer, Keyes Toyota (5855 Van Nuys Blvd, Sherman Oaks, CA 91401); and the throttle body; however, the failure persisted. The manufacturer was made aware of the failure, and a complaint was filed. The failure mileage was 16,000.

NHTSA ID

11727487

Incident

Dec 27, 2025

Mileage

16,000 mi

A/C compressor Non-functioning A/C affects windshield defogging function. Issue was diagnosed and repair at an independent vehicle repair facility No it was not. None.

NHTSA ID

11626350

Incident

Nov 1, 2024

The paint is chipping from the car

NHTSA ID

11603447

Incident

Jun 29, 2024

During a routine drive on the 91 West freeway my car got stuck in gear. I was unable to move the car that was on a busy freeway that was seconds ago driving perfectly.

NHTSA ID

11497609

Incident

Nov 22, 2022

The contact owned a 2017 Toyota Corolla IM. The contact stated that while driving at 5 MPH, another vehicle struck the driver's side front door, causing the seat belt to forcefully retract inward on his chest. The air bags were deployed upon impact. The contact received medical attention for his chest pain and was diagnosed with two hernias. A police report was filed. The vehicle was driven to the residence by his neighbor and was deemed totaled by the insurance company. The manufacturer was not made aware of the failure. The failure mileage was approximately 33,000.

NHTSA ID

11489844

Incident

Sep 26, 2022

Mileage

33,000 mi

VEHICLE STRUCK A DEAR AT APPROX. 50-55 MPH. NO AIRBAG DEPLOYMENT. VEHICLE SUFFERED DAMAGE AS FAR BACK AS THE ENGINE REQUIRING REPLACEMENT OF THE INTAKE MANIFOLD. FRONT IMPACT BAR AND CORE SUPPORT WAS NOTICEABLY BENT. HOW COULD AIRBAGS NOT DEPLOY? I WAS NOT DRIVING MY WIFE WAS.

NHTSA ID

11376330

Incident

Nov 17, 2020

Mileage

38,000 mi

MY CAR IS IM COROLLA 2017. WHEN I WAS DRIVING 2 DAYS AGO THE AIR BAG WARNING APPEARED IN THE DASHBOARD. I BROUGHT THE CAR TO THE NEAREST TOYOTA TO BE CHECKED. I WAS INFORMED THAT THE SPIRAL CABLE THAT CONNECTS TO THE DRIVER'S AIRBAG MODULE NEEDS TO BE REPLACED. I TOLD THE SERVICE REPRESENTATIVE THAT MY CAR IS ONLY MORE THAN 3 YEARS OLD WITH 32,000 MILEAGE. MY CONCERN IS MY SAFETY DRIVING A CAR WHEN THE SPIRAL CABLE ATTACHED TO THE DRIVER'S AIRBAG IS DAMAGED WHICH COULD DEACTIVATES THE AIRBAG AND CAUSED THE AIRBAG WARNING LIGHT TO COME ON. HE MENTIONED I NEED TO PAY ROUGHLY $700.00 FOR THE SPIRAL ELECTRICAL WIRE TO BE REPLACED BECAUSE HE HAUD MY CAR IS OUT OF WARRANTY ALREADY. IS IT REALLY MY FAULT IF THE SPIRAL CABLE IS DAMAGED THAT DEACTIVATES THE AIRBAG OR IS IT AN EXISTING ISSUE CONCERNING SPIRAL CABLE CONNECTED TO AIRBAGS. THANK YOU.

NHTSA ID

11362295

Incident

Sep 29, 2020

Mileage

32,000 mi

I WON'T TO KNOW WHY IT'S NOT MANDATORY FOR ALL NEWLY MANUFACTURED VEHICLES TO HAVE THE COMPUTERIZED BLIND SPOT ASSISTANCE (BSA) SYSTEM INSTALLED? THIS SYSTEM MUST BE MANDATORY THE SAME AS SEATBELTS AND AIRBAGS. VEHICLES SUCH AS THE NISSANS HAVE ADVANCED WARNING SYSTEMS FOR BLIND SPOTS. COUNTLESS MOTOR VEHICLES ACCIDENTS HAPPEN DAILY BECAUSE DRIVERS CAN'T PROPERLY SEE EXISTING TRAFFIC PRIOR TO CHANGING LANES DUE TO SIDE MIRROR BLIND SPOTS. THE DUAL/DOUBLE SIDE MIRROR MUST BE MADE AVAILABLE SO THE DEALERS OR THE INDIVIDUAL CAN REMOVE/REPLACE ALL EXISTING MIRRORS. IT NEEDS TO BE MANDATORY FOR CURRENT OWNERS OF ALL VEHICLES BEING DRIVEN TO HAVE AT LEAST THE DUAL/SPLIT MIRROR. THIS SAFETY REQUIREMENT WILL SAVE COUNTLESS LIVES EACH DAY. THESE WARNING SYSTEMS SHOULD NOT BE A LUXURY FOR ONLY THE RICH. EVERY LIFE MATTERS. THE TECHNOLOGY IS THERE AND MUST BE USED TO HELP SAVE LIVES. PLEASE PASS THIS ON TO WHOM EVER CAN MAKE A DIFFERENCE FOR CHANGE.

NHTSA ID

11221072

Incident

Jun 18, 2019

Mileage

15,000 mi

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.

This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.

TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks

TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.

TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.