RoadVitals

2016 Vermeer TG5000

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Latest Jun 27, 2016
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2016 Vermeer TG5000. 3 safety recalls have been issued covering this model year.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

3 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
16V486000

PARKING BRAKE

Jun 27, 2016
254 units potentially affected
The defect: Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2014-2016 DT6, HG4000, HC6000, HG8000, TG5000, TG7000 and WC2300XL, 2014-2015 TG9000 and 2015-2016 WC2500XL trailers, equipped with certain Bendix SR5 spring brake valves. These valves may have been improperly machined which may cause a delay of application of the spring brakes while parking.
The risk: If there is a delay of the spring brake application, the trailer may roll away after it has decoupled from the tractor, increasing the risk of a crash or injury.
The remedy: Vermeer will contact owners and provide a remedy kit, complete with instructions, to repair any affected SR-5 trailer relay valves, free of charge. Vermeer issued an interim notification to owners on August 19, 2016. The recall began on October 14, 2016. Owners may contact Vermeer Customer Service Department at 1-641-628-3141. Vermeer's number for this recall is IK3350.
Vermeer Manufacturing CompanyManufacturer number IK3350View on NHTSA.gov
16V427000

PARKING BRAKE:CONVENTIONAL:AIR

Jun 13, 2016
11 units potentially affected
The defect: Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2014-2016 TG5000 vehicles manufactured November 23, 2013, to May 23, 2016. The assembly instruction manual for these vehicles called for the wrong slack adjuster pushrod length to be used, and as a result, the pushrod threads may fail, causing the trailer parking brakes to unintentionally engage.
The risk: If the trailer brakes unintentionally engage it would increase the risk of a crash.
The remedy: Vermeer will notify owners, and dealers will reset the air brake pushrod length to the correct dimension, free of charge. The recall began on August 4, 2016. Owners may contact Vermeer customer service at 1-641-628-3141. Vermeer's number for this recall is IK3334.
Vermeer Manufacturing CompanyManufacturer number IK3334View on NHTSA.gov
16V425000

TRAILER HITCHES:FIFTH WHEEL ASSEMBLY

Jun 10, 2016
11 units potentially affected
The defect: Vermeer Manufacturing Company (Vermeer) is recalling certain 2014-2016 TG5000 Tub Grinder trailers manufactured November 23, 2013, to May 23, 2016. The spherical washers used during the assembly of the kingpin may have been installed incorrectly, possibly causing the attaching bolts to fail and therefore the kingpin to detach.
The risk: If the kingpin does not remain properly connected to the trailer, the trailer may detach from the vehicle, increasing the risk of a crash.
The remedy: Vermeer will notify owners, and dealers will inspect and repair the installation of the spherical washers, as necessary, free of charge. The recall began on August 4, 2016. Owners may contact Vermeer customer service at 1-641-628-3141.
Vermeer Manufacturing CompanyView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Compare model years

Complaint and recall counts across every year of this model

Vermeer TG5000 by model year
YearComplaintsRecallsInvestigationsIssue Index
2026000—
2025000—
2023000—
2022000—
2021000—
2020000—
2019000—
2018000—
2016Viewing030—
2015030—
2014030—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.