2013 Volkswagen Jetta Hybrid Recalls

NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

In August 2015, VW launched Safety Recall 15V-483 to address the loss of the protection provided by the front driver air bag in several models due to the failure of the clock spring. VW’s recall indicated that debris entry into the steering wheel hub can result in the contamination and ultimately failure of the clock spring in 2010-2014 MY CC, Eos, GTI, Golf, Jetta, Jetta Sportwagen, Passat, and Tiguan models. The contamination of the clock spring by debris, such as human hair, can cause the flat ribbon cable to tear. This results in the loss of the electrical connection to the front driver air bag and any steering wheel mounted controls. The clock spring is designed so that the flat cable inside will break with minimum force to prevent it from impeding movement of the steering wheel. The loss of the electrical connection to the front driver air bag results in the immediate illumination of the air bag warning light and prevents the deployment of the front driver air bag in a collision of sufficient severity. A torn clock spring also causes audible grinding noises from the area of the steering wheel/driver air bag or steering column while steering. The failure of the clock spring does not impair vehicle control or drivability (steering, brakes, acceleration). In November 2017, the Office of Defects Investigation (ODI) opened Recall Query RQ17009 after receiving complaints that alleged the failure of the clock spring in the subject models. While the majority of these complaints involved vehicles excluded from the original recall, several complaints involved vehicles that had received the remedy for Recall 15V-483. On April 18, 2018, ODI upgraded the investigation to Engineering Analysis EA18003 after receiving additional complaints concerning the recall remedy and scope of Recall 15V-483. During the investigation, VW identified certain 2015-2018 MY vehicles that share a common steering wheel clock spring with the vehicles covered under Recall 15V-483.  VW began using a different clock spring design starting with the 2019 MY Jetta. This new part is not compatible with previous model years due to the communication properties between the clock spring and the vehicle, including the air bag control module. In October 2018, VW released Warranty Extensions AWA-18-18 and VWP-18-11, which established a 15-year, unlimited mileage coverage for the Steering Wheel Clock Spring for vehicles included in the scope of Recall 15V-483. For certain 2010-2018 MY vehicles outside of the recall scope, a 10-year, 120,000-mile coverage was given. Vehicles repaired under these warranty extensions receive replacement clock springs at no charge to the consumer. In early 2023, VW updated AWA-18-18 (now AWA-23-01) and VWP-18-11 to upgrade certain vehicles and model years from the 10-year, 120,000-mile coverage to the 15-year, unlimited mileage coverage option. These warranty extensions cover vehicles with recall remedy failures as well as vehicles outside of the Recall 15V-483 scope that exhibited similar failures. In view of the circumstances, including the high detectability of the subject failure and warranty extensions issued by VW, ODI is closing this Engineering Analysis. NHTSA reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

The Office of Defects Investigation (ODI) opened an investigation based on consumer allegations of steering wheel clock spring/steering column control module (SCCM) failures in model year (MY) 2012 Volkswagen Passat and CC models.The SCCM is a module within the steering column that incorporates a spiral conductor (a ribbon cable) to electrically connect the steering wheel to the vehicle's electrical system while allowing for the turning of the steering wheel.Complainants alleged that that the clock spring failed while driving and without warning.When the SCCM fails electrically, an air bag warning light is illuminated on the dash of the vehicle.If a vehicle with a failed SCCM were to be involved in a crash of sufficient severity to require deployment, the driver air bag may not deploy properly, or deploy at all.As the result of an Information Request response from Volkswagen, ODI determined that the same SCCM was used in several vehicle models and MYs including: 2010-2013 CC, 2010-2013 Eos, 2011-2013 Golf, 2012-2013 Jetta and Jetta SportWagen, 2010 and 2012-2014 Passat and 2011-2014 Tiguan.ODI identified a total of 29 NHTSA complaints across all affected vehicles potentially indicating a failed SCCM.Drivers often indicated that an audible noise was heard from the steering column when the unit failed. Some drivers also mentioned that there was a noticeable but minor resistance to turning of the steering wheel after the failure with noises coming from the steering column.The average failure mileage is approximately 30,500 miles and failures often occur outside of the factory warranty.There were no reported crashes or injuries identified in either the NHTSA or Volkswagen data as a result of SCCM failures.On July 30th, 2015 Volkswagen notified ODI that it would conduct a safety recall (15V-483) to remedy the SCCMs in 415,825 MY2010-2014 vehicles.According to Volkswagen, the SCCM can become contaminated with human hair or similar fibers entering the unit between the steering wheel and steering column.Over time this can cause the electrical cable to tear and lose connection between the steering wheel and vehicle.Volkswagen will install a cover that attaches over the SCCM to help prevent contaminants from entering the unit.A new SCCM designed to reduce outside contamination intrusion was previously introduced into new vehicle production during the 2014 model year; accordingly vehicles equipped with the new design SCCM are not included in the recall.The recall action initiated by the manufacturer addresses the safety risks identified by the investigation.Accordingly, the investigation is closed.The ODI reports cited above can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchSafetyIssues under the following identification (ODI) numbers: 10760644, 10758777, 10748922, 110734168, 10731545, 10721424, 10717651, 10715305, 10713742, 10713139, 10712295, 10711945, 10704830, 10704221, 10702926, 10702212, 10701406, 10691906, 10683944, 10682136, 10672715, 10670517, 10669312, 10628549, 10607240, 10575783, 10561143, 10552113, 10397670.