RoadVitals

1996 Volvo Volvo Truck Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Jun 23, 1999
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

99V187001

ENGINE AND ENGINE COOLING:ENGINE:DIESEL

Jun 23, 1999
162 units potentially affected
The defect: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH CATERPILLAR 3116 MECHANICALLY UNIT INJECTED DIESEL ENGINES. THE GOVERNOR OF THE ENGINE CONTROLS THE UNIT INJECTOR FUELING BY WAY OF A CONTROL ASSEMBLY. IN THIS ASSEMBLY, A LINK TO THE GOVERNOR IS JOINED TO THE CONTROL ROD USING A RIVET. THIS RIVET CAN LOOSEN AND THEN WEAR RESULTING IN ENGINE SPEED INSTABILITY.
The risk: IF NOT IDENTIFIED AND CORRECTED, ENGINE SPEED CONTROL COULD BE LOST DUE TO RIVET DISENGAGEMENT.
The remedy: CATERPILLAR IS CONDUCTING THE NOTIFICATION AND REMEDY FOR THIS RECALL. DEALERS WILL INSPECT THE CONTROL ASSEMBLY AND REPLACED IF NECESSARY.
VOLVO TRUCKS NORTH AMERICA INCView on NHTSA.gov
99V078000

ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Apr 13, 1999
382 units potentially affected
The defect: VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS ASSEMBLED BY EITHER VOLVO GM HEAVY TRUCK CORPORATION OR VOLVO TRUCKS NORTH AMERICA, INC., AND WITH A 2,100 RPM DETROIT SERIES 60 ENGINE, AND A 32 INCH, 8 BLADE KYSOR ENGINE COOLING FAN. THE BLADES MAY SEPARATE FROM THE ENGINE COOLING FAN ASSEMBLY DURING FAN OPERATION AND FULL ENGINE RPM.
The risk: THIS CONDITION POSES A HAZARD TO ANYONE WORKING OR STANDING IN THE AREA OF THE ENGINE COOLING FAN WITHOUT WARNING WHEN THE HOOD IS OPEN.
The remedy: DEALERS WILL REPLACE THE FACTORY INSTALLED ENGINE COOLING FAN.
VOLVO TRUCKS NORTH AMERICA INCManufacturer number RVXA9902View on NHTSA.gov
96V124001

SUSPENSION

Jul 25, 1996
214 units potentially affected
The defect: THE EQUALIZING BEAM SHAFT OF THE TANDEM AXLE SUSPENSION WERE MANUFACTURED FROM AS-ROLLED SAE4140 STEEL RATHER THAN THE SPECIFIED ANNEALED SAE4140. THESE SHAFTS CAN FRACTURE INSIDE THE BEAM AT THE TOE OF THE WELD.
The risk: VEHICLES ARE SUBJECT TO VEHICLE TILT AND POSSIBLE ROLLOVER IN THE EVENT THAT BOTH EQUALIZING BEAMS, ON THE SAME SIDE OF THE VEHICLE, EXPERIENCE A SIMULTANEOUS SHAFT FAILURE. AFFECTED SUSPENSIONS CAN ALSO DROP AND CONTACT THE ROAD SURFACE GENERATING SPARKS WHICH COULD IGNITE FLAMMABLE MATERIAL.
The remedy: OWNER NOTIFICATION IS BEING CONDUCTED BY NEWAY ANCHORLOK. DEALERS WILL INSPECT AND REPLACE ALL SUSPENSION SUSPENSION BEAMS WITH SUSPENSION BEAMS CONTAINING APPROPRIATE SHAFTS.
VOLVO TRUCKS NORTH AMERICA INCView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .