RoadVitals

2017 Western Star 4700 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
9
Newest Nov 17, 2021
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

9 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

Nov 17, 2021
307 units potentially affected
The defect: Daimler Trucks North America, LLC (DTNA) is recalling certain 2012-2021 Freightliner SD 108, Freightliner SD 114, 2016-2020 Freightliner Coronado, 2013 Western Star 6900, 2013-2022 Western Star 4700, Western Star 4900, and 2022 49X vehicles. The tires and rims are not approved and rated for these vehicles from the Tire and Rim Association or tire manufacturer. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, "Wheels and Rims-Other Than Passenger Cars."
The risk: Unapproved tires that are not rated for the vehicle can cause tire performance issues, increasing the risk of a crash.
The remedy: Dealer will inspect and replace, as necessary, tires and rims, free of charge. Interim owner notification letters were mailed January 14, 2022. Owner notification letters were mailed on April 22, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall FL-908.
Daimler Trucks North America, LLCManufacturer number FL-908View on NHTSA.gov

ELECTRICAL SYSTEM:WIRING

Nov 12, 2021
6,100 units potentially affected
The defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Western Star 4700, 4900, 5700, and 6900 trucks. The affected trucks have a power stud that passes through the bulkhead. In certain circumstances, the power stud may contact the bulkhead and result in an electrical arc.
The risk: An electrical arc can increase the risk of a fire.
The remedy: Dealers will replace the pass-through power studs, free of charge. Owner notification letters were mailed January 7, 2022. This recall supersedes previous recall number 18V-191. Vehicles previously inspected and considered complete under 18V-191 will need to return for the new remedy. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-907.
Daimler Trucks North America, LLCManufacturer number FL-907View on NHTSA.gov

STEERING; STEERING:LINKAGES:TIE ROD ASSEMBLY; SUSPENSION:FRONT:CONTROL ARM

Dec 19, 2018
501 units potentially affected
The defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.
The risk: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.
The remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.
Daimler Trucks North America LLCManufacturer number FL-802View on NHTSA.gov

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER

May 29, 2018
8,741 units potentially affected
The defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently tightened, allowing the bolts to loosen.
The risk: If the brake caliper mounting bolts loosen, braking performance may be reduced, increasing the risk of a crash.
The remedy: DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts and tighten them as necessary, free of charge. DTNA issued owners an interim notification on July 25, 2018. The recall began September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-772.
Daimler Trucks North America LLCManufacturer number FL-772View on NHTSA.gov

ELECTRICAL SYSTEM:WIRING

Mar 26, 2018
7,128 units potentially affected
The defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Western Star 4700, 4900, 5700, and 6900 trucks. The affected trucks have a power stud that passes through the bulkhead. In certain circumstances the power stud may contact the bulkhead and result in an electrical arc.
The risk: An electrical arc can increase the risk of a fire.
The remedy: DTNA will notify owners, and dealers will inspect the power stud for the proper clearance to the bulkhead, and replace it if necessary, free of charge. DTNA issued an interim notification to owners on May 23, 2018. The recall began October 29, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-766.
Daimler Trucks North America LLCManufacturer number FL-766View on NHTSA.gov

EQUIPMENT

Dec 15, 2017
24,860 units potentially affected
The defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
The risk: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
The remedy: DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.
Daimler Trucks North America LLCManufacturer number FL-759View on NHTSA.gov

EXTERIOR LIGHTING:BRAKE LIGHTS; EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

Nov 27, 2017
438,255 units potentially affected
The defect: Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal.
The risk: If the brake lights fail to illuminate, there would not be a signal to other motorists that the vehicle is slowing, increasing the risk of a crash.
The remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.
Daimler Trucks North America LLCManufacturer number FL-756View on NHTSA.gov

ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES

Sep 21, 2017
32 units potentially affected
The defect: Daimler Trucks North America LLC (DTNA) is recalling certain 2013-2018 Western Star 4700 trucks. The battery cable may contact the all wheel drive axle yoke.
The risk: Battery cable contact with the axle yoke may cause the cable to chafe and short, increasing the risk of a fire.
The remedy: DTNA will notify owners, and dealers will inspect the battery cables, repairing them as needed, free of charge. The recall began on November 16, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-746.
Daimler Trucks North America LLCManufacturer number FL-746View on NHTSA.gov

POWER TRAIN:AXLE HUBS

Aug 31, 2016
156 units potentially affected
The defect: Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2017 Freightliner M2 Business Class, 108 SD, 114 SD, Cascadia, Coronado, Western Star 4700, 4800, and 5700 XE trucks manufactured March 15, 2013, to July 29, 2016 and equipped with Conmet aluminum non-high capacity hubs. These vehicles specify a front axle weight limit that may be greater than that of the hub capacity. As a result, the hub may fail and the wheel may separate from the axle.
The risk: If a wheel separates from the axle, there would be an increased risk of a crash.
The remedy: DTNA will notify owners, and dealers will replace the front axle hubs, free of charge. The recall began during November 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-718.
Daimler Trucks North America LLCManufacturer number FL-718View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

AQ18002ClosedAudit Query

Daimler Trucks North America Recalls

Opened Apr 23, 2018
Closed Jul 11, 2024

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.

EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .