RoadVitals

2025 Altec Ac Series Crane

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Jun 11, 2026
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2025 Altec Ac Series Crane. 2 safety recalls have been issued covering this model year; and 1 manufacturer communication is on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
26V384000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:CRITICAL FASTENERS

Jun 11, 2026
14 units potentially affected
The defect: Altec Industries (Altec) is recalling certain 2024-2026 AC Series Crane vehicles. The inside joints between the side plates and the base plates of the 26-foot insulating personnel jib (IJ26) may be missing welds.
The risk: Missing welds can lead to platform joint failure due to fatigue or overload, resulting in the platform falling from the boom tip, increasing the risk of injury.
The remedy: Altec will advise owners to inspect the IJ26 jib for missing welds. If the welds are missing, the jib should be taken out of service immediately. Altec will add the missing welds or provide a repair procedure and kit, free of charge. Owner notification letters were mailed July 23, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB-3330.
Altec Industries, Inc.Manufacturer number MAB-3330View on NHTSA.gov
26V170000

EXTERIOR LIGHTING

Mar 20, 2026
134 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2025 AC Series Crane and DT Series Digger Derrick vehicles. The harness intended to prevent Altec installed lighting from overloading the chassis lighting circuit was not installed, which may result in a loss of power to the body lighting or trailer lights.
The risk: Loss of body lighting or trailer lights increases the risk of a crash.
The remedy: Altec will notify owners to inspect their vehicle for the harness. If the harness is missing, a repair kit will be provided, free of charge. Owner notification letters were mailed May 15, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3295.
Altec Industries, Inc.Manufacturer number CSN-3295View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

CSR-3248

ELECTRICAL SYSTEM; EXTERIOR LIGHTING

Altec Industries, Inc. has received notification from PACCAR that a vehicle you possess that is equipped with Altec equipment could fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 108, "Lamps, reflective devices, and associated equipment." Both Kenworth and Peterbilt vehicles are affected. Altec has included both notices with the mailing.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Altec Ac Series Crane by model year
YearComplaintsRecallsInvestigationsIssue Index
2026010—
2025Viewing020—
2024010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.