RoadVitals

2025 Altec Aerial Device Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
7
Newest Apr 17, 2026
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

7 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

26V247000

FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: RADAR

Apr 17, 2026
36 units potentially affected
The defect: Altec Industries, Inc. is recalling certain 2025-2026 Digger Derrick and 2025-2026 Aerial Device vehicles. The front end radar was improperly installed, which may result in improper operation of the Adaptive Cruise Control (ACC) and Active Brake Assist (ABA).
The risk: While driving, the brakes may activate unexpectedly without the driver's input, increasing the risk of a crash.
The remedy: Altec will inform the owners to inspect the front end radar installation and if installed incorrectly, instruct owners to take the vehicle to an OEM Chassis dealer to have the radar remounted and calibrated, free of charge. Owner notification letters were mailed June 12, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3309.
Altec Industries, Inc.Manufacturer number CSN-3309View on NHTSA.gov
26V150000

EQUIPMENT:OTHER:LABELS

Mar 13, 2026
10,875 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2023-2026 Service Body, Aerial Device, Pressure Digger, Spray Truck, and Digger Derrick vehicles. The low tire pressure rating printed on the final stage certification label is incorrect.
The risk: An incorrect pressure rating may lead to underinflated tires, increasing the risk of a tire blowout or a crash.
The remedy: Altec will inspect and replace the incorrect certification label, free of charge. Owner notification letters were mailed May 11, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3294.
Altec Industries, Inc.Manufacturer number CSN-3294View on NHTSA.gov
25V890000

ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS; EXTERIOR LIGHTING:TAIL LIGHTS

Dec 18, 2025
152 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2023-2025 Aerial Device and Digger Derrick vehicles. The electronic taillight module harness may have inadequate circuit protection.
The risk: Wiring without adequate protection may short circuit, increasing the risk of a fire.
The remedy: Altec will provide instructions on inspecting and updating the circuit as necessary, free of charge. Owner notification letters were mailed February 13, 2026. Owners may contact Altec customer service at 1-877-462-5832.
Altec Industries, Inc.Manufacturer number CSN-3271View on NHTSA.gov
25V629000

EQUIPMENT:OTHER:LABELS

Sep 19, 2025
135 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2023-2025 Aerial Device, 2022-2024 Forestry Body, 2022-2025 Service Body, and 2025 Digger Derrick vehicles. The Gross Axle Weight Rating (GAWR) listed on the vehicle certification label may be incorrect, leading to the vehicle being unintentionally overloaded.
The risk: An overloaded vehicle can increase the risk of a crash.
The remedy: Altec will inspect and replace the labels as necessary, free of charge. Owner notification letters were mailed November 7, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN CSN-3251.
Altec Industries, Inc.Manufacturer number CSN-3251View on NHTSA.gov
25V581000

ELECTRICAL SYSTEM:IGNITION

Sep 5, 2025
19 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2024-2025 Altec Aerial Device, and Digger Derrick vehicles. The chassis ignition circuit may be overloaded, which can result in a blown fuse and cause an engine shutdown.
The risk: An engine shutdown increases the risk of a crash.
The remedy: Altec will replace the hydraulic tank heater relay, free of charge. Owner notification letters were mailed October 29, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3247. This recall is an expansion of NHTSA recall number 24V681.
Altec Industries, Inc.Manufacturer number CSN-3247View on NHTSA.gov
25V562000

STRUCTURE:FRAME AND MEMBERS

Aug 29, 2025
903 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
The risk: A cable step that fails during use increases the risk of injury.
The remedy: Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.
Altec Industries, Inc.Manufacturer number CSN-3246View on NHTSA.gov
25V529000

STRUCTURE:BODY:BUMPERS

Aug 14, 2025
124 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2024-2025 Aerial Device, and Digger Derrick vehicles. The front winch bumper may be secured with incorrect bolts, which can cause the bumper to detach from the vehicle.
The risk: A front bumper that detaches can become a road hazard and increase the risk of a crash. In addition, the bolts can fail suddenly during winch operation, increasing the risk of injury.
The remedy: Altec will replace the bolts, free of charge. Owner notification letters were mailed October 10, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3244.
Altec Industries, Inc.Manufacturer number CSN-3244View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources