RoadVitals

2010 Altec AH85

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
6
Latest Jan 20, 2016
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2010 Altec AH85. 6 safety recalls have been issued covering this model year; and 1 manufacturer communication is on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

6 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov

ELECTRICAL SYSTEM

Jan 20, 2016
195 units potentially affected
The defect: Altec Industries (Altec) is recalling certain model year 2010-2015 AH75, AH85, and AH100 Aerial Devices manufactured January 10, 2008, to December 31, 2015. The affected units have a hydraulic pressure control valve that may allow the aerial device to move even when not told to do so.
The risk: An aerial device that moves unexpectedly increases the risk of injury to the operator.
The remedy: Altec will notify owners, and dealers will replace the hydraulic pressure control valves, free of charge. The recall began on March 15, 2016. Owners may contact Altec customer service at 1-205-991-7733.
Altec Industries Inc.View on NHTSA.gov

EQUIPMENT

Jun 4, 2014
120 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain model year 2009-2012 AH75, AH85, and AH100 Aerial Devices manufactured October 2009 through December 2012. The affected devices may allow electricity to be conducted through the boom due to water entering into the fiberglass layers. Additionally, the joint connecting the fiberglass insert and the steel boom components may fail.
The risk: A fiberglass lower boom insert that can conduct electricity increases the risk of electrocution to the operator should the boom contact a power line. If the joint between the fiberglass insert and the steel boom component fails, the boom may fall, putting the operator at an increased risk of injury.
The remedy: Altec will notify owners, and dealers will do supplemental dielectric testing and replace the lower boom, free of charge. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 598.
Altec Industries Inc.Manufacturer number CSN 598View on NHTSA.gov

EQUIPMENT:ELECTRICAL

Jan 2, 2014
168 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain model year 2010-2013 AH75, AH85, and AH100 vehicles manufactured from April 1, 2010, through November 20, 2013. Moisture may get into the control module plug and result in inadvertant movement of the boom or platform.
The risk: The unexpected movement increases the risk of injury to the operator or those nearby.
The remedy: Altec will notify owners and dealers will replace the control module wiring harness, free of charge. The recall will begin on April 14, 2014. Customers may contact Altec at 1-877-462-5832. Altec's number for this recall is CSN 592.
Altec Industries Inc.Manufacturer number CSN 592View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

SIL-859

EQUIPMENT

Altec has learned that on AH75/85/100, AH75A/85A/100A, and HL125 aerial devices built from November 2003 to January 2021, there is potential for the jib rotational positioning pin to disengage when the platform is tilted down 90 degrees or more from the level working position. This is due to the combination of wear to the edges of the jib indexing plate pinning holes during use and vertical clearance in the jib pivot due to manufacturing tolerances. Altec has developed a kit which provides a new jib rotational positioning pin with greater engagement and adds spacers to limit the vertical clearance in the jib pivot, for use if inspection shows it is required.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Altec AH85 by model year
YearComplaintsRecallsInvestigationsIssue Index
2015010
2014010
2013030
2012040
2011040
2010Viewing060
2009050
2008040
2007030
2006030
2005030
2004020
2003020
2002020

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.